Hi All, I am using Sunblade 100, solaris9 with Axis network camera I bought from ebay for $200. This is a real deal No software to configure, its a live video server with ethernet port, & will work with any O/S cause it work in a browser. For more info check out www.axis.com
& best of luck johnny agarwal --- Urs Steiner <[EMAIL PROTECTED]> wrote: > HI all > > We have a SUN Blade 100 (Suse 7.3) and would like to > use a webcam with > it. Is anybody else doing something like that? > > At the moment we're using a Philips Vesta Pro > PCVC680 (USB) which works, > but as the pwcx module is binary-only (intel > compatible logically), we > cannot use it with full resolution. So we're hoping > somebody knows of a > solution to this. > > more information: http://www.smcc.demon.nl/webcam/ > Type Philips Vesta Pro PCVC680 > > Kernel 2.4.14 > > The pwc module works, this means the camera is > recoignized and answers. > For greater resolutions the pwcx module is needed, > which because of a > NDA is available as binary only (i386 and ppc). > > -hub.c: USB new device connect on bus1/1, assigned > device number 5 > -usb.c: USB device 5 (vend/prod 0x471/0x308) is not > claimed by any > active driver. > -Linux video capture interface: v1.00 > -pwc Philips PCA645/646 + PCVC675/680/690 + > PCVC730/740/750 webcam > module version 8.3 loaded. > -pwc Also supports the Askey VC010, Logitech > Quickcam 3000 Pro and the > Samsung MPC-C10 and MPC-C30. > -usb.c: registered new driver Philips webcam > -pwc Philips PCVC680K (Vesta Pro) USB webcam > detected. > -pwc Registered as /dev/video0. > -pwc Video mode CIF@10 fps is only supported with > the decompressor > module (pwcx). > > TIA > Urs > > -- > mail: urs [dot] steiner [at] switzerland [dot] org > "What time is it?" * Lister "Saturday." * > Rimmer > > > > -- > To unsubscribe, e-mail: > [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] > __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
