Dear Listmembers,
to circumvent my problem with that promise device not reporting sync I tried
to install a 29160 adaptec controller. However, booting from the original
iso-image I was not able to load a module called aic7xxx.
Moreover, I have some questions (SuSE Sparc 7.3):
1.) I haven't found any obvious differences between saying "manual" or
"yast2" at the boot prompt. Both end up in a graphic yast2 window. No way to
say insmod XXXX. I can remove the symbios scsi-driver module, but I cannot
load another one. The only offer is sym58xxx. Am I doing something very
wrong here?
2.) saying "text" at boot prompt leads to yast2 / text mode. I had the same
problems here, at last I could see a message on Alt F4 : no module called
aic7xxx.
So here is my question:
- how can I make linux aware of the aic7xxx module at boot time? Should I
expect stability issues? Am I doing something wrong? Any help is greatly
appreciated,
many thanks in advance,
take care
Dieter Jurzitza
P.S. I am using a Sparc U 60.
--
________________________________________________
HARMAN BECKER AUTOMOTIVE SYSTEMS
Dr.-Ing. Dieter Jurzitza
Manager Hardware Systems
ESI
Industriegebiet Ittersbach
Becker-G�ring Str. 16
D-76307 Karlsbad / Germany
Phone: +49 (0)7248 71-1577
Fax: +49 (0)7248 71-1216
eMail: [EMAIL PROTECTED]
Internet: http://www.becker.de
> -----Original Message-----
> From: Harty, Brook [mailto:[EMAIL PROTECTED]]
> Sent: Friday, October 11, 2002 7:21 PM
> To: 'Robert Schiele'; Harty, Brook
> Cc: [EMAIL PROTECTED]
> Subject: RE: [suse-sparc] sparc-suse-linux/bin/ld: cannot
> find -lstdc++
>
>
>
>
> -----Original Message-----
> From: Robert Schiele [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, October 10, 2002 10:53 AM
> To: Harty, Brook
> Cc: [EMAIL PROTECTED]
> Subject: Re: [suse-sparc] sparc-suse-linux/bin/ld: cannot
> find -lstdc++
>
>
> On Thu, Oct 10, 2002 at 11:42:23AM -0500, Harty, Brook wrote:
> > Any ideas on how to install the new gcc3.2 packages?
> Everything seemed to
> > work, until I compiled the new vnc.
> > error - sparc-suse-linux/bin/ld: cannot find -lstdc++
> >
> > ldconfig -v | grep -i libstd
> >
> > ldconfig: /usr/lib/libstdc++-libc6.2-2.so.3 is not a symbolic link
> > ldconfig: /usr/lib/libg++-libc6.2-2.so.3 is not a symbolic link
> >
> >
> > But checking the directory, libstdc++.so.5 is there.
> >
> > -r-xr-xr-x 1 root root 360031 Sep 20 11:32
> > libstdc++-3-libc6.1-2-2.10.0.so
> > -rw-r--r-- 1 root root 541424 Oct 28 2001
> > libstdc++-3-libc6.2-2-2.10.0.a
> > -r-xr-xr-x 1 root root 379038 Oct 28 2001
> > libstdc++-3-libc6.2-2-2.10.0.so
> > -r-xr-xr-x 1 root root 452801 Sep 20 11:32
> > libstdc++-libc6.1-1.so.2
> > lrwxrwxrwx 1 root root 31 Sep 27 13:49
> > libstdc++-libc6.1-2.so.3 -> libstdc++-3-libc6.1-2-2.10.0.so
> > lrwxrwxrwx 1 root root 30 Sep 27 13:48
> > libstdc++-libc6.2-2.a.3 -> libstdc++-3-libc6.2-2-2.10.0.a
> > -r-xr-xr-x 1 root root 379034 Sep 20 11:32
> > libstdc++-libc6.2-2.so.3
> > lrwxrwxrwx 1 root root 18 Sep 27 15:50
> libstdc++.so.2.8
> ->
> > libstdc++.so.2.8.0
> > -rwxr-xr-x 1 root root 368928 Sep 20 11:32
> libstdc++.so.2.8.0
> > lrwxrwxrwx 1 root root 18 Sep 27 15:48
> libstdc++.so.5 ->
> > libstdc++.so.5.0.0
> > -rwxr-xr-x 1 root root 942594 Sep 20 06:25
> libstdc++.so.5.0.0
> >
> >
> > Any ideas?
>
> You didn't install libstdc++-devel, did you?
>
> Robert
>
> --
> Robert Schiele Tel.: +49-621-181-2517
> Dipl.-Wirtsch.informatiker mailto:[EMAIL PROTECTED]
>
>
> Nope. That was the problem. Thanks!
> -Brook
>
>
> --
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
