Thank you for regarding my problem. Yes, I can boot the SB100 from a Solaris cd. -- The exact error is:
pbm_intmap_match: bus 02, devfn 00: IRQ [00020000.00000000.00000000.00000001] not found in interrupt-map Where it doesn't matter, wether I choose yast2, text or manual install. -- Btw: I also cannot boot from a Debian cd Error: Clock_probe: Cannot find timer chip (yes, I know..., this is not a Debian mailinglist, but for the sake of completeness it should be mentioned...) -- The SB100 has no optional graphic-card, I'm using the onboard (think it's m64) Thank you. Peter. -- -----Original Message----- From: Harty, Brook [mailto:[EMAIL PROTECTED]] Sent: Monday, December 30, 2002 9:15 PM To: Dietrich, Peter; Richard Klingler Cc: [EMAIL PROTECTED] Subject: RE: [suse-sparc] Suse 7.3 on SunBlade100 ?? Can you boot the Solaris cd on the sunblade 100? Good way to test to see if it boots off cds. Also what is the exact error when you boot from the cdrom? The only problem I can think of, is it IS booting from cdrom. You probably have dual video cards in the SB100. Linux doesn't support sun 3D cards, remove it. Thanks, -Brook Harty -----Original Message----- From: Dietrich, Peter [mailto:[EMAIL PROTECTED]] Sent: Friday, December 27, 2002 8:24 AM To: 'Richard Klingler' Cc: '[EMAIL PROTECTED]' Subject: RE: [suse-sparc] Suse 7.3 on SunBlade100 ?? -----Original Message----- From: Richard Klingler [mailto:[EMAIL PROTECTED]] Sent: Friday, December 27, 2002 5:10 PM To: Dietrich, Peter Subject: RE: [suse-sparc] Suse 7.3 on SunBlade100 ?? > # prtconf -V > OBP 4.5.9 2002/02/07 02:12 > > Hmmm...., I think it's not too old. > Nope..it's he same as I have... And also I was able to boot from any CD...SuSE 7.3, Debian 3.0 as also downloaded Solaris 8/9 CDs. I just had to burn them on a PC with Easy CD creator.. They weren't bootable burned on a Mac with Toast. Rick ok. So I don't need a 'special' image for sunblade 100, do I? the image for 7.3 (for sparc) should work. and (I hope!!) I also don't have to compile my own kernel (don't even know how....) but it makes me wonder, why I can boot a sparc 20 and also an ultra 10 from the same CD's... they seem to be bootable (burnt them with cdrecord on solaris). but nevertheless I think it's worth to try another program. Before I start further investigation I will try with Easy CD creator on my PC. thank you for spending your time on this. regards, Peter. -- -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
