Really ? It is giving me problems at boot time. How do I change this setting if I can't see the screen to change it ?
Sorry if I'm showing my ignorance here. I recently acquired four SS10s with the intention of putting SuSE on them, but I am coming from an x86 world and the Sparcs are still a bit of a mystery to me. Thanks, Stuart. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Saturday, February 22, 2003 17:26 To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [suse-sparc] Sun to VGA Adapter You need to change the refresh and/or resolution settings, as Sun video cards are somewhat strange when it comes to the size and refresh rates. A miltisync monitor will have no issues with the refresh, but my KDS 19" (1 year old) had serious issues with the 1280x960 resolution the Sun card was outputting to it. It kept giving me "out of range" errors on the monitor. When I set it to 1280x1024, everything was fine. It didn't like the 1600x1024 setting on my Ultra 5, either, but the 1600x1200 was fine. HTH Stuart Powell wrote: > > Hello, everyone. > > Anyone know what kind of adapter I need to get an SS10 to display to a VGA > monitor ? I bought a 13pin to VGA adapter, but the monitor doesn't seem to > be getting a signal. It's a Samsung 19" screen less than a year old, so I'm > pretty sure it'll work with the signal from the SS10. The SS10 has a Turbo > XGX card in it, by the way. > > Thanks, > Stuart. > > -- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
