Hi!
> > Now it looks much better to me, but I'd actually free the pci_dev object
> > when
> > it's no longer necessary.
> >
> > And I have a question: is it possible that we don't find a VGA device? And
> > if
> > so, then what are we going to do?
>
> Both fixed by Frank Seidel for version 3 of this patch (and i adjusted
> the Subject of this thread so that we actually will find it in the future :-)
>
> This patch is actually "tested" on an nx5000 (but that one resumes fine
> without it, so that does not say too much), and it seems to not break
> anything.
Hey, we need testing testing testing on this patch. People were
complaining that we don't do pci state saving, where are they now?!
Pavel
> Index: s2ram.c
> ===================================================================
> RCS file: /cvsroot/suspend/suspend/s2ram.c,v
> retrieving revision 1.45
> diff -u -p -r1.45 s2ram.c
> --- s2ram.c 20 Sep 2006 16:23:51 -0000 1.45
> +++ s2ram.c 19 Dec 2006 13:23:40 -0000
> @@ -11,12 +11,16 @@
> #include <errno.h>
> #include <string.h>
>
> +#include <pci/pci.h>
> +
> #define S2RAM
> #include "vbetool/vbetool.h"
> #include "vt.h"
> #include "s2ram.h"
>
> static void *vbe_buffer;
> +unsigned char vga_pci_state[256];
> +static struct pci_dev *vga_dev = NULL;
> /* Flags set from whitelist */
> static int flags, vbe_mode = -1;
> char bios_version[1024], sys_vendor[1024], sys_product[1024],
> sys_version[1024];
> @@ -36,6 +40,7 @@ char bios_version[1024], sys_vendor[1024
> #define UNSURE 0x20 /* unverified entries from acpi-support 0.59 */
> #define NOFB 0x40 /* must not use a frame buffer */
> #define VBE_MODE 0x80 /* machine needs "vbetool vbemode get / set" */
> +#define PCI_SAVE 0x100 /* we need to save the VGA PCI registers */
>
> #include "whitelist.c"
>
> @@ -67,14 +72,15 @@ void machine_known(int i)
> " bios_version = '%s'\n", i,
> whitelist[i].sys_vendor, whitelist[i].sys_product,
> whitelist[i].sys_version, whitelist[i].bios_version);
> - printf("Fixes: 0x%x %s%s%s%s%s%s%s\n", flags,
> + printf("Fixes: 0x%x %s%s%s%s%s%s%s%s\n", flags,
> (flags & VBE_SAVE) ? "VBE_SAVE " : "",
> (flags & VBE_POST) ? "VBE_POST " : "",
> (flags & VBE_MODE) ? "VBE_MODE " : "",
> (flags & RADEON_OFF) ? "RADEON_OFF " : "",
> (flags & S3_BIOS) ? "S3_BIOS " : "",
> (flags & S3_MODE) ? "S3_MODE " : "",
> - (flags & NOFB) ? "NOFB " : "");
> + (flags & NOFB) ? "NOFB " : "",
> + (flags & PCI_SAVE) ? "PCI_SAVE " : "");
> if (flags & UNSURE)
> printf("Machine is in the whitelist but perhaps using "
> "vbetool unnecessarily.\n"
> @@ -143,6 +149,42 @@ int s2ram_check(int id)
> return ret;
> }
>
> +struct pci_dev *find_vga(void)
> +{
> + struct pci_access *pacc;
> + struct pci_dev *dev;
> + struct pci_dev *result;
> +
> + pacc = pci_alloc(); /* Get the pci_access structure */
> + pci_init(pacc); /* Initialize the PCI library */
> + pci_scan_bus(pacc); /* We want to get the list of devices */
> +
> + for (dev=pacc->devices; dev; dev=dev->next) {
> + pci_fill_info(dev, PCI_FILL_IDENT | PCI_FILL_CLASS);
> + if (dev->device_class == 0x300)
> + break;
> + }
> +
> + /* save result */
> + result = malloc(sizeof(*dev));
> + if (result)
> + memcpy(result, dev, sizeof(*dev));
> +
> + pci_cleanup(pacc);
> +
> + return result;
> +}
> +
> +void save_vga_pci(struct pci_dev *dev)
> +{
> + pci_read_block(dev, 0, vga_pci_state, 256);
> +}
> +
> +void restore_vga_pci(struct pci_dev *dev)
> +{
> + pci_write_block(dev, 0, vga_pci_state, 256);
> +}
> +
> /* warning: we have to be on a text console when calling this */
> int s2ram_hacks(void)
> {
> @@ -171,6 +213,14 @@ int s2ram_hacks(void)
> printf("Calling radeon_cmd_light(0)\n");
> radeon_cmd_light(0);
> }
> + if (flags & PCI_SAVE) {
> + vga_dev = find_vga();
> + if (vga_dev) {
> + printf("saving PCI config of device %02x:%02x.%d\n",
> + vga_dev->bus, vga_dev->dev, vga_dev->func);
> + save_vga_pci(vga_dev);
> + }
> + }
>
> return 0;
> }
> @@ -216,6 +266,11 @@ int s2ram_do(void)
>
> void s2ram_resume(void)
> {
> + if ((flags & PCI_SAVE) && vga_dev) {
> + printf("restoring PCI config of device %02x:%02x.%d\n",
> + vga_dev->bus, vga_dev->dev, vga_dev->func);
> + restore_vga_pci(vga_dev);
> + }
> // FIXME: can we call vbetool_init() multiple times without cleaning up?
> if (flags & VBE_POST) {
> vbetool_init();
> @@ -260,6 +315,7 @@ static void usage(void)
> " -a, --acpi_sleep: set the acpi_sleep parameter before "
> "suspend\n"
> " 1=s3_bios, 2=s3_mode, 3=both\n"
> + " -v, --pci_save: save the PCI config space for the VGA
> card.\n"
> "\n");
> exit(1);
> }
> @@ -278,10 +334,11 @@ int main(int argc, char *argv[])
> { "radeontool", no_argument, NULL, 'r'},
> { "identify", no_argument, NULL, 'i'},
> { "acpi_sleep", required_argument, NULL, 'a'},
> + { "pci_save", no_argument, NULL, 'v'},
> { NULL, 0, NULL, 0 }
> };
>
> - while ((i = getopt_long(argc, argv, "nhfspmria:", options, NULL)) !=
> -1) {
> + while ((i = getopt_long(argc, argv, "nhfspmriva:", options, NULL)) !=
> -1) {
> switch (i) {
> case 'h':
> usage();
> @@ -311,6 +368,9 @@ int main(int argc, char *argv[])
> case 'a':
> flags |= (atoi(optarg) & (S3_BIOS | S3_MODE));
> break;
> + case 'v':
> + flags |= PCI_SAVE;
> + break;
> default:
> usage();
> break;
> @@ -366,6 +426,11 @@ int main(int argc, char *argv[])
> printf("switching back to vt%d\n", active_console);
> chvt(active_console);
> }
> +
> + /* and we also need to free vga_dev if allocated */
> + if (vga_dev)
> + free(vga_dev);
> +
> return ret;
> }
> #endif
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Suspend-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/suspend-devel
