BTW ... s2disk works!
and my machine has a Intel Pentium 4 HT proccesor running SMP kernel.
I think the problems could be something with the HD, it could not been waking
up from suspend state. I attach the output of 'hdparm -I /dev/hda'.
Thank you.
El Domingo, 8 de Abril de 2007, Xavier Callejas escribió:
> Hi,
>
> My system gets hanged after try to resume from s2ram. My system is not in
> whitelist, so I have tried everything in http://en.opensuse.org/S2ram but
> with with the same bad results.
>
> I have tried to update to the last versions everything I think is
> relationated with s2ram. I have openSUSE 10.2.
>
> After I press power button to resume from s2ram, capslocks do not work,
> keyboard do not work, I have to force a shutdown pressing powerbutton about
> 5 seconds. The screen is also in 'off' mode.
>
> I attach a copy of my dmesg.
>
> # s2ram
> Machine is unknown.
> This machine can be identified by:
> sys_vendor = "TOSHIBA"
> sys_product = "Satellite A70"
> sys_version = "PSA70U-00L00N"
> bios_version = "V1.30"
> See http://en.opensuse.org/S2ram for details.
>
> If you report a problem, please include the complete output above.
--
Xavier Callejas
------------------------------------------------------
Open Your Mind, Use Open Source.
/dev/hda:
ATA device, with non-removable media
Model Number: IC25N060ATMR04-0
Serial Number: MRG30HKCJVRT4H
Firmware Revision: MO3OAD4A
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 3a
Supported: 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 117210240
LBA48 user addressable sectors: 117210240
device size with M = 1024*1024: 57231 MBytes
device size with M = 1000*1000: 60011 MBytes (60 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254 (0xfe)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
Address Offset Reserved Area Boot
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
50min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Suspend-devel mailing list
Suspend-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/suspend-devel
