Greetings glorious s2ram developers,
I got a Lenovo 3000 v100 for christmas, expecting suspend would work
well based on other people's reports. Turns out there are many
sub-models of 3000 v100, and mine is the 0763-4CU which has a core2duo
7200 processor.
I've run s2ram -f to get it to suspend, while in single-user mode and
following all the instructions and variations I can discover. Here is
the info:
talon:/home/awwaiid# s2ram -i
This machine can be identified by:
sys_vendor = "LENOVO"
sys_product = "07634CU"
sys_version = "LENOVO3000 V100"
bios_version = "62ETA9WW (0.09 )"
So here is the problem: it successfully suspends for about 10-15
seconds. If I suspend and then awaken it before that then it wakes up
without issue. After, and it hangs.
My only theory is that there is some sort of interrupt or something that
happens after a little bit of suspend time... but I haven't figured
anything out.
Any tips or ideas? Directions to bother someone else are also welcome.
Much appreciated!
--Brock
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Suspend-devel mailing list
Suspend-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/suspend-devel
