> Yes, but does it also work on the text console? (i doubt it, and i'd guess
> that you need to add "-f -p -m" to the s2ram options. Look at
> http://en.opensuse.org/S2ram to find out how to get the best options for
> your machine.
It work. See below:
-------------------------------------------------
[EMAIL PROTECTED] ~]$ s2ram -f -p -m
Switching from vt7 to vt1
Calling get_mode
Calling do_post
Calling INT 0x15 (F000:F859)
EAX is 10005F00
Leaving interrupt call.
Calling INT 0x10 (C000:0014)
EAX is 3
Leaving interrupt call.
Calling set_vbe_mode
switching back to vt7
-------------------------------------------------
> I'm not sure if Mandriva has already switched to pm-utils, or if they
> are still using the old powersaved, so i cannot really tell you where
> to configure this. Best ask on a Mandriva related list.
Yes that's right. Powersave doesn't work properly. I decided to rewrite HAL
config file in /usr/lib64/hal/scripts/linux like
hal-system-power-hibernate-linux and hal-system-power-suspend-linux. I now
use s2utils. All s2utils work fine.
> > > > My machine ID:
> > > >
> > > > [EMAIL PROTECTED] slawek]# s2ram -i
> > > > This machine can be identified by:
> > > > sys_vendor = "Hewlett-Packard"
> > > > sys_product = "HP Compaq nx7400 (RH412EA#AKD)"
> > > > sys_version = "F.0B"
> > > > bios_version = "68YGU Ver. F.0B"
--
Sławomir Skrzyniarz
http://home.agh.edu.pl/slawomir
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Suspend-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/suspend-devel
