Author: mav Date: Tue Jan 26 13:09:16 2016 New Revision: 294814 URL: https://svnweb.freebsd.org/changeset/base/294814
Log: 6393 zfs receive a full send as a clone Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Richard Elling <[email protected]> Approved by: Dan McDonald <[email protected]> Author: Paul Dagnelie <[email protected]> illumos/illumos-gate@68ecb2ec930c4b0f00acaf8e0abb2b19c4b8b76f Modified: vendor-sys/illumos/dist/uts/common/fs/zfs/dmu_send.c vendor-sys/illumos/dist/uts/common/fs/zfs/sys/dmu_impl.h vendor-sys/illumos/dist/uts/common/fs/zfs/sys/zfs_ioctl.h Modified: vendor-sys/illumos/dist/uts/common/fs/zfs/dmu_send.c ============================================================================== --- vendor-sys/illumos/dist/uts/common/fs/zfs/dmu_send.c Tue Jan 26 13:03:01 2016 (r294813) +++ vendor-sys/illumos/dist/uts/common/fs/zfs/dmu_send.c Tue Jan 26 13:09:16 2016 (r294814) @@ -137,6 +137,14 @@ dump_record(dmu_sendarg_t *dsp, void *pa return (0); } +/* + * Fill in the drr_free struct, or perform aggregation if the previous record is + * also a free record, and the two are adjacent. + * + * Note that we send free records even for a full send, because we want to be + * able to receive a full send as a clone, which requires a list of all the free + * and freeobject records that were generated on the source. + */ static int dump_free(dmu_sendarg_t *dsp, uint64_t object, uint64_t offset, uint64_t length) @@ -160,15 +168,6 @@ dump_free(dmu_sendarg_t *dsp, uint64_t o (object == dsp->dsa_last_data_object && offset > dsp->dsa_last_data_offset)); - /* - * If we are doing a non-incremental send, then there can't - * be any data in the dataset we're receiving into. Therefore - * a free record would simply be a no-op. Save space by not - * sending it to begin with. - */ - if (!dsp->dsa_incremental) - return (0); - if (length != -1ULL && offset + length < offset) length = -1ULL; @@ -347,10 +346,6 @@ dump_freeobjects(dmu_sendarg_t *dsp, uin { struct drr_freeobjects *drrfo = &(dsp->dsa_drr->drr_u.drr_freeobjects); - /* See comment in dump_free(). */ - if (!dsp->dsa_incremental) - return (0); - /* * If there is a pending op, but it's not PENDING_FREEOBJECTS, * push it out, since free block aggregation can only be done for @@ -750,6 +745,7 @@ dmu_send_impl(void *tag, dsl_pool_t *dp, drr->drr_u.drr_begin.drr_toguid = dsl_dataset_phys(to_ds)->ds_guid; if (dsl_dataset_phys(to_ds)->ds_flags & DS_FLAG_CI_DATASET) drr->drr_u.drr_begin.drr_flags |= DRR_FLAG_CI_DATA; + drr->drr_u.drr_begin.drr_flags |= DRR_FLAG_FREERECORDS; if (ancestor_zb != NULL) { drr->drr_u.drr_begin.drr_fromguid = @@ -772,7 +768,6 @@ dmu_send_impl(void *tag, dsl_pool_t *dp, dsp->dsa_off = off; dsp->dsa_toguid = dsl_dataset_phys(to_ds)->ds_guid; dsp->dsa_pending_op = PENDING_NONE; - dsp->dsa_incremental = (ancestor_zb != NULL); dsp->dsa_featureflags = featureflags; dsp->dsa_resume_object = resumeobj; dsp->dsa_resume_offset = resumeoff; @@ -1286,7 +1281,7 @@ dmu_recv_begin_check(void *arg, dmu_tx_t /* target fs already exists; recv into temp clone */ /* Can't recv a clone into an existing fs */ - if (flags & DRR_FLAG_CLONE) { + if (flags & DRR_FLAG_CLONE || drba->drba_origin) { dsl_dataset_rele(ds, FTAG); return (SET_ERROR(EINVAL)); } @@ -1305,6 +1300,15 @@ dmu_recv_begin_check(void *arg, dmu_tx_t drba->drba_origin)) return (SET_ERROR(ENOENT)); + /* + * If we're receiving a full send as a clone, and it doesn't + * contain all the necessary free records and freeobject + * records, reject it. + */ + if (fromguid == 0 && drba->drba_origin && + !(flags & DRR_FLAG_FREERECORDS)) + return (SET_ERROR(EINVAL)); + /* Open the parent of tofs */ ASSERT3U(strlen(tofs), <, MAXNAMELEN); (void) strlcpy(buf, tofs, strrchr(tofs, '/') - tofs + 1); @@ -1344,7 +1348,8 @@ dmu_recv_begin_check(void *arg, dmu_tx_t dsl_dataset_rele(ds, FTAG); return (SET_ERROR(EINVAL)); } - if (dsl_dataset_phys(origin)->ds_guid != fromguid) { + if (dsl_dataset_phys(origin)->ds_guid != fromguid && + fromguid != 0) { dsl_dataset_rele(origin, FTAG); dsl_dataset_rele(ds, FTAG); return (SET_ERROR(ENODEV)); @@ -1674,6 +1679,20 @@ struct receive_writer_arg { uint64_t bytes_read; /* bytes read when current record created */ }; +struct objlist { + list_t list; /* List of struct receive_objnode. */ + /* + * Last object looked up. Used to assert that objects are being looked + * up in ascending order. + */ + uint64_t last_lookup; +}; + +struct receive_objnode { + list_node_t node; + uint64_t object; +}; + struct receive_arg { objset_t *os; vnode_t *vp; /* The vnode to read the stream from */ @@ -1691,12 +1710,7 @@ struct receive_arg { int err; boolean_t byteswap; /* Sorted list of objects not to issue prefetches for. */ - list_t ignore_obj_list; -}; - -struct receive_ign_obj_node { - list_node_t node; - uint64_t object; + struct objlist ignore_objlist; }; typedef struct guid_map_entry { @@ -2008,13 +2022,14 @@ receive_freeobjects(struct receive_write struct drr_freeobjects *drrfo) { uint64_t obj; + int next_err = 0; if (drrfo->drr_firstobj + drrfo->drr_numobjs < drrfo->drr_firstobj) return (SET_ERROR(EINVAL)); for (obj = drrfo->drr_firstobj; - obj < drrfo->drr_firstobj + drrfo->drr_numobjs; - (void) dmu_object_next(rwa->os, &obj, FALSE, 0)) { + obj < drrfo->drr_firstobj + drrfo->drr_numobjs && next_err == 0; + next_err = dmu_object_next(rwa->os, &obj, FALSE, 0)) { int err; if (dmu_object_info(rwa->os, obj, NULL) != 0) @@ -2024,7 +2039,8 @@ receive_freeobjects(struct receive_write if (err != 0) return (err); } - + if (next_err != ESRCH) + return (next_err); return (0); } @@ -2354,6 +2370,66 @@ receive_read_payload_and_next_header(str return (0); } +static void +objlist_create(struct objlist *list) +{ + list_create(&list->list, sizeof (struct receive_objnode), + offsetof(struct receive_objnode, node)); + list->last_lookup = 0; +} + +static void +objlist_destroy(struct objlist *list) +{ + for (struct receive_objnode *n = list_remove_head(&list->list); + n != NULL; n = list_remove_head(&list->list)) { + kmem_free(n, sizeof (*n)); + } + list_destroy(&list->list); +} + +/* + * This function looks through the objlist to see if the specified object number + * is contained in the objlist. In the process, it will remove all object + * numbers in the list that are smaller than the specified object number. Thus, + * any lookup of an object number smaller than a previously looked up object + * number will always return false; therefore, all lookups should be done in + * ascending order. + */ +static boolean_t +objlist_exists(struct objlist *list, uint64_t object) +{ + struct receive_objnode *node = list_head(&list->list); + ASSERT3U(object, >=, list->last_lookup); + list->last_lookup = object; + while (node != NULL && node->object < object) { + VERIFY3P(node, ==, list_remove_head(&list->list)); + kmem_free(node, sizeof (*node)); + node = list_head(&list->list); + } + return (node != NULL && node->object == object); +} + +/* + * The objlist is a list of object numbers stored in ascending order. However, + * the insertion of new object numbers does not seek out the correct location to + * store a new object number; instead, it appends it to the list for simplicity. + * Thus, any users must take care to only insert new object numbers in ascending + * order. + */ +static void +objlist_insert(struct objlist *list, uint64_t object) +{ + struct receive_objnode *node = kmem_zalloc(sizeof (*node), KM_SLEEP); + node->object = object; +#ifdef ZFS_DEBUG + struct receive_objnode *last_object = list_tail(&list->list); + uint64_t last_objnum = (last_object != NULL ? last_object->object : 0); + ASSERT3U(node->object, >, last_objnum); +#endif + list_insert_tail(&list->list, node); +} + /* * Issue the prefetch reads for any necessary indirect blocks. * @@ -2376,13 +2452,7 @@ static void receive_read_prefetch(struct receive_arg *ra, uint64_t object, uint64_t offset, uint64_t length) { - struct receive_ign_obj_node *node = list_head(&ra->ignore_obj_list); - while (node != NULL && node->object < object) { - VERIFY3P(node, ==, list_remove_head(&ra->ignore_obj_list)); - kmem_free(node, sizeof (*node)); - node = list_head(&ra->ignore_obj_list); - } - if (node == NULL || node->object > object) { + if (!objlist_exists(&ra->ignore_objlist, object)) { dmu_prefetch(ra->os, object, 1, offset, length, ZIO_PRIORITY_SYNC_READ); } @@ -2415,18 +2485,7 @@ receive_read_record(struct receive_arg * */ if (err == ENOENT || (err == 0 && doi.doi_data_block_size != drro->drr_blksz)) { - struct receive_ign_obj_node *node = - kmem_zalloc(sizeof (*node), - KM_SLEEP); - node->object = drro->drr_object; -#ifdef ZFS_DEBUG - struct receive_ign_obj_node *last_object = - list_tail(&ra->ignore_obj_list); - uint64_t last_objnum = (last_object != NULL ? - last_object->object : 0); - ASSERT3U(node->object, >, last_objnum); -#endif - list_insert_tail(&ra->ignore_obj_list, node); + objlist_insert(&ra->ignore_objlist, drro->drr_object); err = 0; } return (err); @@ -2643,7 +2702,6 @@ resume_check(struct receive_arg *ra, nvl return (0); } - /* * Read in the stream's records, one by one, and apply them to the pool. There * are two threads involved; the thread that calls this function will spin up a @@ -2677,8 +2735,7 @@ dmu_recv_stream(dmu_recv_cookie_t *drc, sizeof (ra.bytes_read), 1, &ra.bytes_read); } - list_create(&ra.ignore_obj_list, sizeof (struct receive_ign_obj_node), - offsetof(struct receive_ign_obj_node, node)); + objlist_create(&ra.ignore_objlist); /* these were verified in dmu_recv_begin */ ASSERT3U(DMU_GET_STREAM_HDRTYPE(drc->drc_drrb->drr_versioninfo), ==, @@ -2832,12 +2889,7 @@ out: } *voffp = ra.voff; - for (struct receive_ign_obj_node *n = - list_remove_head(&ra.ignore_obj_list); n != NULL; - n = list_remove_head(&ra.ignore_obj_list)) { - kmem_free(n, sizeof (*n)); - } - list_destroy(&ra.ignore_obj_list); + objlist_destroy(&ra.ignore_objlist); return (err); } Modified: vendor-sys/illumos/dist/uts/common/fs/zfs/sys/dmu_impl.h ============================================================================== --- vendor-sys/illumos/dist/uts/common/fs/zfs/sys/dmu_impl.h Tue Jan 26 13:03:01 2016 (r294813) +++ vendor-sys/illumos/dist/uts/common/fs/zfs/sys/dmu_impl.h Tue Jan 26 13:09:16 2016 (r294814) @@ -24,7 +24,7 @@ */ /* * Copyright (c) 2012, Joyent, Inc. All rights reserved. - * Copyright (c) 2013, 2014 by Delphix. All rights reserved. + * Copyright (c) 2013, 2015 by Delphix. All rights reserved. */ #ifndef _SYS_DMU_IMPL_H @@ -293,7 +293,6 @@ typedef struct dmu_sendarg { uint64_t dsa_toguid; int dsa_err; dmu_pendop_t dsa_pending_op; - boolean_t dsa_incremental; uint64_t dsa_featureflags; uint64_t dsa_last_data_object; uint64_t dsa_last_data_offset; Modified: vendor-sys/illumos/dist/uts/common/fs/zfs/sys/zfs_ioctl.h ============================================================================== --- vendor-sys/illumos/dist/uts/common/fs/zfs/sys/zfs_ioctl.h Tue Jan 26 13:03:01 2016 (r294813) +++ vendor-sys/illumos/dist/uts/common/fs/zfs/sys/zfs_ioctl.h Tue Jan 26 13:09:16 2016 (r294814) @@ -20,7 +20,7 @@ */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. - * Copyright (c) 2012, 2014 by Delphix. All rights reserved. + * Copyright (c) 2012, 2015 by Delphix. All rights reserved. */ #ifndef _SYS_ZFS_IOCTL_H @@ -126,6 +126,16 @@ typedef enum dmu_send_resume_token_versi #define DRR_FLAG_CLONE (1<<0) #define DRR_FLAG_CI_DATA (1<<1) +/* + * This send stream, if it is a full send, includes the FREE and FREEOBJECT + * records that are created by the sending process. This means that the send + * stream can be received as a clone, even though it is not an incremental. + * This is not implemented as a feature flag, because the receiving side does + * not need to have implemented it to receive this stream; it is fully backwards + * compatible. We need a flag, though, because full send streams without it + * cannot necessarily be received as a clone correctly. + */ +#define DRR_FLAG_FREERECORDS (1<<2) /* * flags in the drr_checksumflags field in the DRR_WRITE and _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "[email protected]"
