Author: manu Date: Fri Nov 4 01:56:29 2016 New Revision: 308280 URL: https://svnweb.freebsd.org/changeset/base/308280
Log: MFC r305689: a10_mmc: Remove completly the PIO code now all access is done by DMA. Rename registers as in the manual. Do a hard reset of the controller before a soft one. Since DMA is always used remove dependancy on allwinner_soc_family, it was used to differentiate SoC as the fdt compatible string were the same. Tested on A10, A20, H3 and A64. Reviewed by: jmcneill Differential Revision: https://reviews.freebsd.org/D6868 Modified: stable/11/sys/arm/allwinner/a10_mmc.c stable/11/sys/arm/allwinner/a10_mmc.h Directory Properties: stable/11/ (props changed) Modified: stable/11/sys/arm/allwinner/a10_mmc.c ============================================================================== --- stable/11/sys/arm/allwinner/a10_mmc.c Fri Nov 4 01:50:59 2016 (r308279) +++ stable/11/sys/arm/allwinner/a10_mmc.c Fri Nov 4 01:56:29 2016 (r308280) @@ -48,7 +48,6 @@ __FBSDID("$FreeBSD$"); #include <dev/mmc/mmcreg.h> #include <dev/mmc/mmcbrvar.h> -#include <arm/allwinner/aw_machdep.h> #include <arm/allwinner/a10_mmc.h> #include <dev/extres/clk/clk.h> #include <dev/extres/hwreset/hwreset.h> @@ -56,16 +55,12 @@ __FBSDID("$FreeBSD$"); #define A10_MMC_MEMRES 0 #define A10_MMC_IRQRES 1 #define A10_MMC_RESSZ 2 -#define A10_MMC_DMA_SEGS 16 +#define A10_MMC_DMA_SEGS ((MAXPHYS / PAGE_SIZE) + 1) #define A10_MMC_DMA_MAX_SIZE 0x2000 #define A10_MMC_DMA_FTRGLEVEL 0x20070008 #define CARD_ID_FREQUENCY 400000 -static int a10_mmc_pio_mode = 0; - -TUNABLE_INT("hw.a10.mmc.pio_mode", &a10_mmc_pio_mode); - static struct ofw_compat_data compat_data[] = { {"allwinner,sun4i-a10-mmc", 1}, {"allwinner,sun5i-a13-mmc", 1}, @@ -73,14 +68,11 @@ static struct ofw_compat_data compat_dat }; struct a10_mmc_softc { - bus_space_handle_t a10_bsh; - bus_space_tag_t a10_bst; device_t a10_dev; clk_t a10_clk_ahb; clk_t a10_clk_mmc; hwreset_t a10_rst_ahb; int a10_bus_busy; - int a10_id; int a10_resid; int a10_timeout; struct callout a10_timeoutc; @@ -91,7 +83,6 @@ struct a10_mmc_softc { uint32_t a10_intr; uint32_t a10_intr_wait; void * a10_intrhand; - bus_size_t a10_fifo_reg; /* Fields required for DMA access. */ bus_addr_t a10_dma_desc_phys; @@ -100,7 +91,6 @@ struct a10_mmc_softc { void * a10_dma_desc; bus_dmamap_t a10_dma_buf_map; bus_dma_tag_t a10_dma_buf_tag; - int a10_dma_inuse; int a10_dma_map_err; }; @@ -116,7 +106,7 @@ static int a10_mmc_detach(device_t); static int a10_mmc_setup_dma(struct a10_mmc_softc *); static int a10_mmc_reset(struct a10_mmc_softc *); static void a10_mmc_intr(void *); -static int a10_mmc_update_clock(struct a10_mmc_softc *); +static int a10_mmc_update_clock(struct a10_mmc_softc *, uint32_t); static int a10_mmc_update_ios(device_t, device_t); static int a10_mmc_request(device_t, device_t, struct mmc_request *); @@ -127,9 +117,9 @@ static int a10_mmc_release_host(device_t #define A10_MMC_LOCK(_sc) mtx_lock(&(_sc)->a10_mtx) #define A10_MMC_UNLOCK(_sc) mtx_unlock(&(_sc)->a10_mtx) #define A10_MMC_READ_4(_sc, _reg) \ - bus_space_read_4((_sc)->a10_bst, (_sc)->a10_bsh, _reg) + bus_read_4((_sc)->a10_res[A10_MMC_MEMRES], _reg) #define A10_MMC_WRITE_4(_sc, _reg, _value) \ - bus_space_write_4((_sc)->a10_bst, (_sc)->a10_bsh, _reg, _value) + bus_write_4((_sc)->a10_res[A10_MMC_MEMRES], _reg, _value) static int a10_mmc_probe(device_t dev) @@ -160,17 +150,10 @@ a10_mmc_attach(device_t dev) sc = device_get_softc(dev); sc->a10_dev = dev; sc->a10_req = NULL; - sc->a10_id = device_get_unit(dev); - if (sc->a10_id > 3) { - device_printf(dev, "only 4 hosts are supported (0-3)\n"); - return (ENXIO); - } if (bus_alloc_resources(dev, a10_mmc_res_spec, sc->a10_res) != 0) { device_printf(dev, "cannot allocate device resources\n"); return (ENXIO); } - sc->a10_bst = rman_get_bustag(sc->a10_res[A10_MMC_MEMRES]); - sc->a10_bsh = rman_get_bushandle(sc->a10_res[A10_MMC_MEMRES]); if (bus_setup_intr(dev, sc->a10_res[A10_MMC_IRQRES], INTR_TYPE_MISC | INTR_MPSAFE, NULL, a10_mmc_intr, sc, &sc->a10_intrhand)) { @@ -182,31 +165,12 @@ a10_mmc_attach(device_t dev) MTX_DEF); callout_init_mtx(&sc->a10_timeoutc, &sc->a10_mtx, 0); -#if defined(__arm__) - /* - * Later chips use a different FIFO offset. Unfortunately the FDT - * uses the same compatible string for old and new implementations. - */ - switch (allwinner_soc_family()) { - case ALLWINNERSOC_SUN4I: - case ALLWINNERSOC_SUN5I: - case ALLWINNERSOC_SUN7I: - sc->a10_fifo_reg = A10_MMC_FIFO; - break; - default: - sc->a10_fifo_reg = A31_MMC_FIFO; - break; - } -#else /* __aarch64__ */ - sc->a10_fifo_reg = A31_MMC_FIFO; -#endif - /* De-assert reset */ if (hwreset_get_by_ofw_name(dev, "ahb", &sc->a10_rst_ahb) == 0) { error = hwreset_deassert(sc->a10_rst_ahb); if (error != 0) { device_printf(dev, "cannot de-assert reset\n"); - return (error); + goto fail; } } @@ -244,19 +208,22 @@ a10_mmc_attach(device_t dev) SYSCTL_ADD_INT(ctx, tree, OID_AUTO, "req_timeout", CTLFLAG_RW, &sc->a10_timeout, 0, "Request timeout in seconds"); - /* Reset controller. */ + /* Hardware reset */ + A10_MMC_WRITE_4(sc, A10_MMC_HWRST, 1); + DELAY(100); + A10_MMC_WRITE_4(sc, A10_MMC_HWRST, 0); + DELAY(500); + + /* Soft Reset controller. */ if (a10_mmc_reset(sc) != 0) { device_printf(dev, "cannot reset the controller\n"); goto fail; } - if (a10_mmc_pio_mode == 0 && a10_mmc_setup_dma(sc) != 0) { + if (a10_mmc_setup_dma(sc) != 0) { device_printf(sc->a10_dev, "Couldn't setup DMA!\n"); - a10_mmc_pio_mode = 1; + goto fail; } - if (bootverbose) - device_printf(sc->a10_dev, "DMA status: %s\n", - a10_mmc_pio_mode ? "disabled" : "enabled"); if (OF_getencprop(node, "bus-width", &bus_width, sizeof(uint32_t)) <= 0) bus_width = 4; @@ -369,7 +336,6 @@ a10_dma_cb(void *arg, bus_dma_segment_t return; dma_desc = sc->a10_dma_desc; - /* Note nsegs is guaranteed to be zero if err is non-zero. */ for (i = 0; i < nsegs; i++) { dma_desc[i].buf_size = segs[i].ds_len; dma_desc[i].buf_addr = segs[i].ds_addr; @@ -386,7 +352,7 @@ a10_dma_cb(void *arg, bus_dma_segment_t A10_MMC_DMA_CONFIG_ER; dma_desc[i].next = 0; } - } + } } static int @@ -401,13 +367,12 @@ a10_mmc_prepare_dma(struct a10_mmc_softc if (cmd->data->len > A10_MMC_DMA_MAX_SIZE * A10_MMC_DMA_SEGS) return (EFBIG); error = bus_dmamap_load(sc->a10_dma_buf_tag, sc->a10_dma_buf_map, - cmd->data->data, cmd->data->len, a10_dma_cb, sc, BUS_DMA_NOWAIT); + cmd->data->data, cmd->data->len, a10_dma_cb, sc, 0); if (error) return (error); if (sc->a10_dma_map_err) return (sc->a10_dma_map_err); - sc->a10_dma_inuse = 1; if (cmd->data->flags & MMC_DATA_WRITE) sync_op = BUS_DMASYNC_PREWRITE; else @@ -415,27 +380,32 @@ a10_mmc_prepare_dma(struct a10_mmc_softc bus_dmamap_sync(sc->a10_dma_buf_tag, sc->a10_dma_buf_map, sync_op); bus_dmamap_sync(sc->a10_dma_tag, sc->a10_dma_map, BUS_DMASYNC_PREWRITE); - val = A10_MMC_READ_4(sc, A10_MMC_IMASK); - val &= ~(A10_MMC_RX_DATA_REQ | A10_MMC_TX_DATA_REQ); - A10_MMC_WRITE_4(sc, A10_MMC_IMASK, val); - val = A10_MMC_READ_4(sc, A10_MMC_GCTRL); - val &= ~A10_MMC_ACCESS_BY_AHB; - val |= A10_MMC_DMA_ENABLE; - A10_MMC_WRITE_4(sc, A10_MMC_GCTRL, val); - val |= A10_MMC_DMA_RESET; - A10_MMC_WRITE_4(sc, A10_MMC_GCTRL, val); - A10_MMC_WRITE_4(sc, A10_MMC_DMAC, A10_MMC_IDMAC_SOFT_RST); + /* Enable DMA */ + val = A10_MMC_READ_4(sc, A10_MMC_GCTL); + val &= ~A10_MMC_CTRL_FIFO_AC_MOD; + val |= A10_MMC_CTRL_DMA_ENB; + A10_MMC_WRITE_4(sc, A10_MMC_GCTL, val); + + /* Reset DMA */ + val |= A10_MMC_CTRL_DMA_RST; + A10_MMC_WRITE_4(sc, A10_MMC_GCTL, val); + + A10_MMC_WRITE_4(sc, A10_MMC_DMAC, A10_MMC_DMAC_IDMAC_SOFT_RST); A10_MMC_WRITE_4(sc, A10_MMC_DMAC, - A10_MMC_IDMAC_IDMA_ON | A10_MMC_IDMAC_FIX_BURST); - val = A10_MMC_READ_4(sc, A10_MMC_IDIE); - val &= ~(A10_MMC_IDMAC_RECEIVE_INT | A10_MMC_IDMAC_TRANSMIT_INT); + A10_MMC_DMAC_IDMAC_IDMA_ON | A10_MMC_DMAC_IDMAC_FIX_BURST); + + /* Enable RX or TX DMA interrupt */ if (cmd->data->flags & MMC_DATA_WRITE) - val |= A10_MMC_IDMAC_TRANSMIT_INT; + val |= A10_MMC_IDST_TX_INT; else - val |= A10_MMC_IDMAC_RECEIVE_INT; + val |= A10_MMC_IDST_RX_INT; A10_MMC_WRITE_4(sc, A10_MMC_IDIE, val); + + /* Set DMA descritptor list address */ A10_MMC_WRITE_4(sc, A10_MMC_DLBA, sc->a10_dma_desc_phys); - A10_MMC_WRITE_4(sc, A10_MMC_FTRGL, A10_MMC_DMA_FTRGLEVEL); + + /* FIFO trigger level */ + A10_MMC_WRITE_4(sc, A10_MMC_FWLR, A10_MMC_DMA_FTRGLEVEL); return (0); } @@ -445,11 +415,10 @@ a10_mmc_reset(struct a10_mmc_softc *sc) { int timeout; - A10_MMC_WRITE_4(sc, A10_MMC_GCTRL, - A10_MMC_READ_4(sc, A10_MMC_GCTRL) | A10_MMC_RESET); + A10_MMC_WRITE_4(sc, A10_MMC_GCTL, A10_MMC_RESET); timeout = 1000; while (--timeout > 0) { - if ((A10_MMC_READ_4(sc, A10_MMC_GCTRL) & A10_MMC_RESET) == 0) + if ((A10_MMC_READ_4(sc, A10_MMC_GCTL) & A10_MMC_RESET) == 0) break; DELAY(100); } @@ -457,18 +426,20 @@ a10_mmc_reset(struct a10_mmc_softc *sc) return (ETIMEDOUT); /* Set the timeout. */ - A10_MMC_WRITE_4(sc, A10_MMC_TIMEOUT, 0xffffffff); + A10_MMC_WRITE_4(sc, A10_MMC_TMOR, + A10_MMC_TMOR_DTO_LMT_SHIFT(A10_MMC_TMOR_DTO_LMT_MASK) | + A10_MMC_TMOR_RTO_LMT_SHIFT(A10_MMC_TMOR_RTO_LMT_MASK)); /* Clear pending interrupts. */ - A10_MMC_WRITE_4(sc, A10_MMC_RINTR, 0xffffffff); + A10_MMC_WRITE_4(sc, A10_MMC_RISR, 0xffffffff); A10_MMC_WRITE_4(sc, A10_MMC_IDST, 0xffffffff); /* Unmask interrupts. */ - A10_MMC_WRITE_4(sc, A10_MMC_IMASK, - A10_MMC_CMD_DONE | A10_MMC_INT_ERR_BIT | - A10_MMC_DATA_OVER | A10_MMC_AUTOCMD_DONE); + A10_MMC_WRITE_4(sc, A10_MMC_IMKR, + A10_MMC_INT_CMD_DONE | A10_MMC_INT_ERR_BIT | + A10_MMC_INT_DATA_OVER | A10_MMC_INT_AUTO_STOP_DONE); /* Enable interrupts and AHB access. */ - A10_MMC_WRITE_4(sc, A10_MMC_GCTRL, - A10_MMC_READ_4(sc, A10_MMC_GCTRL) | A10_MMC_INT_ENABLE); + A10_MMC_WRITE_4(sc, A10_MMC_GCTL, + A10_MMC_READ_4(sc, A10_MMC_GCTL) | A10_MMC_CTRL_INT_ENB); return (0); } @@ -483,12 +454,6 @@ a10_mmc_req_done(struct a10_mmc_softc *s if (cmd->error != MMC_ERR_NONE) { /* Reset the controller. */ a10_mmc_reset(sc); - a10_mmc_update_clock(sc); - } - if (sc->a10_dma_inuse == 0) { - /* Reset the FIFO. */ - A10_MMC_WRITE_4(sc, A10_MMC_GCTRL, - A10_MMC_READ_4(sc, A10_MMC_GCTRL) | A10_MMC_FIFO_RESET); } req = sc->a10_req; @@ -496,7 +461,6 @@ a10_mmc_req_done(struct a10_mmc_softc *s sc->a10_req = NULL; sc->a10_intr = 0; sc->a10_resid = 0; - sc->a10_dma_inuse = 0; sc->a10_dma_map_err = 0; sc->a10_intr_wait = 0; req->done(req); @@ -511,8 +475,8 @@ a10_mmc_req_ok(struct a10_mmc_softc *sc) timeout = 1000; while (--timeout > 0) { - status = A10_MMC_READ_4(sc, A10_MMC_STAS); - if ((status & A10_MMC_CARD_DATA_BUSY) == 0) + status = A10_MMC_READ_4(sc, A10_MMC_STAR); + if ((status & A10_MMC_STAR_CARD_BUSY) == 0) break; DELAY(1000); } @@ -552,28 +516,6 @@ a10_mmc_timeout(void *arg) "Spurious timeout - no active request\n"); } -static int -a10_mmc_pio_transfer(struct a10_mmc_softc *sc, struct mmc_data *data) -{ - int i, write; - uint32_t bit, *buf; - - buf = (uint32_t *)data->data; - write = (data->flags & MMC_DATA_WRITE) ? 1 : 0; - bit = write ? A10_MMC_FIFO_FULL : A10_MMC_FIFO_EMPTY; - for (i = sc->a10_resid; i < (data->len >> 2); i++) { - if ((A10_MMC_READ_4(sc, A10_MMC_STAS) & bit)) - return (1); - if (write) - A10_MMC_WRITE_4(sc, sc->a10_fifo_reg, buf[i]); - else - buf[i] = A10_MMC_READ_4(sc, sc->a10_fifo_reg); - sc->a10_resid = i + 1; - } - - return (0); -} - static void a10_mmc_intr(void *arg) { @@ -584,9 +526,9 @@ a10_mmc_intr(void *arg) sc = (struct a10_mmc_softc *)arg; A10_MMC_LOCK(sc); - rint = A10_MMC_READ_4(sc, A10_MMC_RINTR); + rint = A10_MMC_READ_4(sc, A10_MMC_RISR); idst = A10_MMC_READ_4(sc, A10_MMC_IDST); - imask = A10_MMC_READ_4(sc, A10_MMC_IMASK); + imask = A10_MMC_READ_4(sc, A10_MMC_IMKR); if (idst == 0 && imask == 0 && rint == 0) { A10_MMC_UNLOCK(sc); return; @@ -603,14 +545,14 @@ a10_mmc_intr(void *arg) } if (rint & A10_MMC_INT_ERR_BIT) { device_printf(sc->a10_dev, "error rint: 0x%08X\n", rint); - if (rint & A10_MMC_RESP_TIMEOUT) + if (rint & A10_MMC_INT_RESP_TIMEOUT) sc->a10_req->cmd->error = MMC_ERR_TIMEOUT; else sc->a10_req->cmd->error = MMC_ERR_FAILED; a10_mmc_req_done(sc); goto end; } - if (idst & A10_MMC_IDMAC_ERROR) { + if (idst & A10_MMC_IDST_ERROR) { device_printf(sc->a10_dev, "error idst: 0x%08x\n", idst); sc->a10_req->cmd->error = MMC_ERR_FAILED; a10_mmc_req_done(sc); @@ -619,8 +561,7 @@ a10_mmc_intr(void *arg) sc->a10_intr |= rint; data = sc->a10_req->cmd->data; - if (data != NULL && sc->a10_dma_inuse == 1 && - (idst & A10_MMC_IDMAC_COMPLETE)) { + if (data != NULL && (idst & A10_MMC_IDST_COMPLETE) != 0) { if (data->flags & MMC_DATA_WRITE) sync_op = BUS_DMASYNC_POSTWRITE; else @@ -631,16 +572,13 @@ a10_mmc_intr(void *arg) BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->a10_dma_buf_tag, sc->a10_dma_buf_map); sc->a10_resid = data->len >> 2; - } else if (data != NULL && sc->a10_dma_inuse == 0 && - (rint & (A10_MMC_DATA_OVER | A10_MMC_RX_DATA_REQ | - A10_MMC_TX_DATA_REQ)) != 0) - a10_mmc_pio_transfer(sc, data); + } if ((sc->a10_intr & sc->a10_intr_wait) == sc->a10_intr_wait) a10_mmc_req_ok(sc); end: A10_MMC_WRITE_4(sc, A10_MMC_IDST, idst); - A10_MMC_WRITE_4(sc, A10_MMC_RINTR, rint); + A10_MMC_WRITE_4(sc, A10_MMC_RISR, rint); A10_MMC_UNLOCK(sc); } @@ -650,7 +588,8 @@ a10_mmc_request(device_t bus, device_t c int blksz; struct a10_mmc_softc *sc; struct mmc_command *cmd; - uint32_t cmdreg, val; + uint32_t cmdreg; + int err; sc = device_get_softc(bus); A10_MMC_LOCK(sc); @@ -660,48 +599,39 @@ a10_mmc_request(device_t bus, device_t c } sc->a10_req = req; cmd = req->cmd; - cmdreg = A10_MMC_START; + cmdreg = A10_MMC_CMDR_LOAD; if (cmd->opcode == MMC_GO_IDLE_STATE) - cmdreg |= A10_MMC_SEND_INIT_SEQ; + cmdreg |= A10_MMC_CMDR_SEND_INIT_SEQ; if (cmd->flags & MMC_RSP_PRESENT) - cmdreg |= A10_MMC_RESP_EXP; + cmdreg |= A10_MMC_CMDR_RESP_RCV; if (cmd->flags & MMC_RSP_136) - cmdreg |= A10_MMC_LONG_RESP; + cmdreg |= A10_MMC_CMDR_LONG_RESP; if (cmd->flags & MMC_RSP_CRC) - cmdreg |= A10_MMC_CHECK_RESP_CRC; + cmdreg |= A10_MMC_CMDR_CHK_RESP_CRC; sc->a10_intr = 0; sc->a10_resid = 0; - sc->a10_intr_wait = A10_MMC_CMD_DONE; + sc->a10_intr_wait = A10_MMC_INT_CMD_DONE; cmd->error = MMC_ERR_NONE; if (cmd->data != NULL) { - sc->a10_intr_wait |= A10_MMC_DATA_OVER; - cmdreg |= A10_MMC_DATA_EXP | A10_MMC_WAIT_PREOVER; + sc->a10_intr_wait |= A10_MMC_INT_DATA_OVER; + cmdreg |= A10_MMC_CMDR_DATA_TRANS | A10_MMC_CMDR_WAIT_PRE_OVER; if (cmd->data->flags & MMC_DATA_MULTI) { - cmdreg |= A10_MMC_SEND_AUTOSTOP; - sc->a10_intr_wait |= A10_MMC_AUTOCMD_DONE; + cmdreg |= A10_MMC_CMDR_STOP_CMD_FLAG; + sc->a10_intr_wait |= A10_MMC_INT_AUTO_STOP_DONE; } if (cmd->data->flags & MMC_DATA_WRITE) - cmdreg |= A10_MMC_WRITE; + cmdreg |= A10_MMC_CMDR_DIR_WRITE; blksz = min(cmd->data->len, MMC_SECTOR_SIZE); - A10_MMC_WRITE_4(sc, A10_MMC_BLKSZ, blksz); - A10_MMC_WRITE_4(sc, A10_MMC_BCNTR, cmd->data->len); + A10_MMC_WRITE_4(sc, A10_MMC_BKSR, blksz); + A10_MMC_WRITE_4(sc, A10_MMC_BYCR, cmd->data->len); - if (a10_mmc_pio_mode == 0) - a10_mmc_prepare_dma(sc); - /* Enable PIO access if sc->a10_dma_inuse is not set. */ - if (sc->a10_dma_inuse == 0) { - val = A10_MMC_READ_4(sc, A10_MMC_GCTRL); - val &= ~A10_MMC_DMA_ENABLE; - val |= A10_MMC_ACCESS_BY_AHB; - A10_MMC_WRITE_4(sc, A10_MMC_GCTRL, val); - val = A10_MMC_READ_4(sc, A10_MMC_IMASK); - val |= A10_MMC_RX_DATA_REQ | A10_MMC_TX_DATA_REQ; - A10_MMC_WRITE_4(sc, A10_MMC_IMASK, val); - } + err = a10_mmc_prepare_dma(sc); + if (err != 0) + device_printf(sc->a10_dev, "prepare_dma failed: %d\n", err); } - A10_MMC_WRITE_4(sc, A10_MMC_CARG, cmd->arg); + A10_MMC_WRITE_4(sc, A10_MMC_CAGR, cmd->arg); A10_MMC_WRITE_4(sc, A10_MMC_CMDR, cmdreg | cmd->opcode); callout_reset(&sc->a10_timeoutc, sc->a10_timeout * hz, a10_mmc_timeout, sc); @@ -811,23 +741,32 @@ a10_mmc_write_ivar(device_t bus, device_ } static int -a10_mmc_update_clock(struct a10_mmc_softc *sc) +a10_mmc_update_clock(struct a10_mmc_softc *sc, uint32_t clkon) { uint32_t cmdreg; int retry; + uint32_t ckcr; - cmdreg = A10_MMC_START | A10_MMC_UPCLK_ONLY | - A10_MMC_WAIT_PREOVER; + ckcr = A10_MMC_READ_4(sc, A10_MMC_CKCR); + ckcr &= ~(A10_MMC_CKCR_CCLK_ENB | A10_MMC_CKCR_CCLK_CTRL); + + if (clkon) + ckcr |= A10_MMC_CKCR_CCLK_ENB; + + A10_MMC_WRITE_4(sc, A10_MMC_CKCR, ckcr); + + cmdreg = A10_MMC_CMDR_LOAD | A10_MMC_CMDR_PRG_CLK | + A10_MMC_CMDR_WAIT_PRE_OVER; A10_MMC_WRITE_4(sc, A10_MMC_CMDR, cmdreg); retry = 0xfffff; while (--retry > 0) { - if ((A10_MMC_READ_4(sc, A10_MMC_CMDR) & A10_MMC_START) == 0) { - A10_MMC_WRITE_4(sc, A10_MMC_RINTR, 0xffffffff); + if ((A10_MMC_READ_4(sc, A10_MMC_CMDR) & A10_MMC_CMDR_LOAD) == 0) { + A10_MMC_WRITE_4(sc, A10_MMC_RISR, 0xffffffff); return (0); } DELAY(10); } - A10_MMC_WRITE_4(sc, A10_MMC_RINTR, 0xffffffff); + A10_MMC_WRITE_4(sc, A10_MMC_RISR, 0xffffffff); device_printf(sc->a10_dev, "timeout updating clock\n"); return (ETIMEDOUT); @@ -839,28 +778,37 @@ a10_mmc_update_ios(device_t bus, device_ int error; struct a10_mmc_softc *sc; struct mmc_ios *ios; - uint32_t clkcr; + uint32_t ckcr; sc = device_get_softc(bus); - clkcr = A10_MMC_READ_4(sc, A10_MMC_CLKCR); - if (clkcr & A10_MMC_CARD_CLK_ON) { - /* Disable clock. */ - clkcr &= ~A10_MMC_CARD_CLK_ON; - A10_MMC_WRITE_4(sc, A10_MMC_CLKCR, clkcr); - error = a10_mmc_update_clock(sc); - if (error != 0) - return (error); - } ios = &sc->a10_host.ios; + + /* Set the bus width. */ + switch (ios->bus_width) { + case bus_width_1: + A10_MMC_WRITE_4(sc, A10_MMC_BWDR, A10_MMC_BWDR1); + break; + case bus_width_4: + A10_MMC_WRITE_4(sc, A10_MMC_BWDR, A10_MMC_BWDR4); + break; + case bus_width_8: + A10_MMC_WRITE_4(sc, A10_MMC_BWDR, A10_MMC_BWDR8); + break; + } + if (ios->clock) { - /* Reset the divider. */ - clkcr &= ~A10_MMC_CLKCR_DIV; - A10_MMC_WRITE_4(sc, A10_MMC_CLKCR, clkcr); - error = a10_mmc_update_clock(sc); + + /* Disable clock */ + error = a10_mmc_update_clock(sc, 0); if (error != 0) return (error); + /* Reset the divider. */ + ckcr = A10_MMC_READ_4(sc, A10_MMC_CKCR); + ckcr &= ~A10_MMC_CKCR_CCLK_DIV; + A10_MMC_WRITE_4(sc, A10_MMC_CKCR, ckcr); + /* Set the MMC clock. */ error = clk_set_freq(sc->a10_clk_mmc, ios->clock, CLK_SET_ROUND_DOWN); @@ -872,25 +820,11 @@ a10_mmc_update_ios(device_t bus, device_ } /* Enable clock. */ - clkcr |= A10_MMC_CARD_CLK_ON; - A10_MMC_WRITE_4(sc, A10_MMC_CLKCR, clkcr); - error = a10_mmc_update_clock(sc); + error = a10_mmc_update_clock(sc, 1); if (error != 0) return (error); } - /* Set the bus width. */ - switch (ios->bus_width) { - case bus_width_1: - A10_MMC_WRITE_4(sc, A10_MMC_WIDTH, A10_MMC_WIDTH1); - break; - case bus_width_4: - A10_MMC_WRITE_4(sc, A10_MMC_WIDTH, A10_MMC_WIDTH4); - break; - case bus_width_8: - A10_MMC_WRITE_4(sc, A10_MMC_WIDTH, A10_MMC_WIDTH8); - break; - } return (0); } Modified: stable/11/sys/arm/allwinner/a10_mmc.h ============================================================================== --- stable/11/sys/arm/allwinner/a10_mmc.h Fri Nov 4 01:50:59 2016 (r308279) +++ stable/11/sys/arm/allwinner/a10_mmc.h Fri Nov 4 01:56:29 2016 (r308280) @@ -29,117 +29,120 @@ #ifndef _A10_MMC_H_ #define _A10_MMC_H_ -#define A10_MMC_GCTRL 0x00 /* Global Control Register */ -#define A10_MMC_CLKCR 0x04 /* Clock Control Register */ -#define A10_MMC_TIMEOUT 0x08 /* Timeout Register */ -#define A10_MMC_WIDTH 0x0C /* Bus Width Register */ -#define A10_MMC_BLKSZ 0x10 /* Block Size Register */ -#define A10_MMC_BCNTR 0x14 /* Byte Count Register */ +#define A10_MMC_GCTL 0x00 /* Control Register */ +#define A10_MMC_CKCR 0x04 /* Clock Control Register */ +#define A10_MMC_TMOR 0x08 /* Timeout Register */ +#define A10_MMC_BWDR 0x0C /* Bus Width Register */ +#define A10_MMC_BKSR 0x10 /* Block Size Register */ +#define A10_MMC_BYCR 0x14 /* Byte Count Register */ #define A10_MMC_CMDR 0x18 /* Command Register */ -#define A10_MMC_CARG 0x1C /* Argument Register */ +#define A10_MMC_CAGR 0x1C /* Argument Register */ #define A10_MMC_RESP0 0x20 /* Response Register 0 */ #define A10_MMC_RESP1 0x24 /* Response Register 1 */ #define A10_MMC_RESP2 0x28 /* Response Register 2 */ #define A10_MMC_RESP3 0x2C /* Response Register 3 */ -#define A10_MMC_IMASK 0x30 /* Interrupt Mask Register */ -#define A10_MMC_MISTA 0x34 /* Masked Interrupt Status Register */ -#define A10_MMC_RINTR 0x38 /* Raw Interrupt Status Register */ -#define A10_MMC_STAS 0x3C /* Status Register */ -#define A10_MMC_FTRGL 0x40 /* FIFO Threshold Watermark Register */ +#define A10_MMC_IMKR 0x30 /* Interrupt Mask Register */ +#define A10_MMC_MISR 0x34 /* Masked Interrupt Status Register */ +#define A10_MMC_RISR 0x38 /* Raw Interrupt Status Register */ +#define A10_MMC_STAR 0x3C /* Status Register */ +#define A10_MMC_FWLR 0x40 /* FIFO Threshold Watermark Register */ #define A10_MMC_FUNS 0x44 /* Function Select Register */ -#define A10_MMC_CBCR 0x48 /* CIU Byte Count Register */ -#define A10_MMC_BBCR 0x4C /* BIU Byte Count Register */ -#define A10_MMC_DBGC 0x50 /* Debug Enable Register */ +#define A10_MMC_HWRST 0x78 /* Hardware reset (not documented) */ #define A10_MMC_DMAC 0x80 /* IDMAC Control Register */ #define A10_MMC_DLBA 0x84 /* IDMAC Desc List Base Address Reg */ #define A10_MMC_IDST 0x88 /* IDMAC Status Register */ #define A10_MMC_IDIE 0x8C /* IDMAC Interrupt Enable Register */ -#define A10_MMC_CHDA 0x90 -#define A10_MMC_CBDA 0x94 -#define A10_MMC_FIFO 0x100 /* FIFO Access Address (A10/A20) */ -#define A31_MMC_FIFO 0x200 /* FIFO Access Address (A31) */ - -/* A10_MMC_GCTRL */ -#define A10_MMC_SOFT_RESET (1U << 0) -#define A10_MMC_FIFO_RESET (1U << 1) -#define A10_MMC_DMA_RESET (1U << 2) -#define A10_MMC_INT_ENABLE (1U << 4) -#define A10_MMC_DMA_ENABLE (1U << 5) -#define A10_MMC_DEBOUNCE_ENABLE (1U << 8) -#define A10_MMC_DDR_MODE (1U << 10) -#define A10_MMC_ACCESS_BY_AHB (1U << 31) +#define A10_MMC_FIFO 0x100 /* FIFO Access Address (A10/A20) */ +#define A31_MMC_FIFO 0x200 /* FIFO Access Address (A31) */ + +/* A10_MMC_GCTL */ +#define A10_MMC_CTRL_SOFT_RST (1U << 0) +#define A10_MMC_CTRL_FIFO_RST (1U << 1) +#define A10_MMC_CTRL_DMA_RST (1U << 2) +#define A10_MMC_CTRL_INT_ENB (1U << 4) +#define A10_MMC_CTRL_DMA_ENB (1U << 5) +#define A10_MMC_CTRL_CD_DBC_ENB (1U << 8) +#define A10_MMC_CTRL_DDR_MOD_SEL (1U << 10) +#define A10_MMC_CTRL_FIFO_AC_MOD (1U << 31) #define A10_MMC_RESET \ - (A10_MMC_SOFT_RESET | A10_MMC_FIFO_RESET | A10_MMC_DMA_RESET) + (A10_MMC_CTRL_SOFT_RST | A10_MMC_CTRL_FIFO_RST | A10_MMC_CTRL_DMA_RST) -/* A10_MMC_CLKCR */ -#define A10_MMC_CARD_CLK_ON (1U << 16) -#define A10_MMC_LOW_POWER_ON (1U << 17) -#define A10_MMC_CLKCR_DIV 0xff - -/* A10_MMC_WIDTH */ -#define A10_MMC_WIDTH1 0 -#define A10_MMC_WIDTH4 1 -#define A10_MMC_WIDTH8 2 +/* A10_MMC_CKCR */ +#define A10_MMC_CKCR_CCLK_ENB (1U << 16) +#define A10_MMC_CKCR_CCLK_CTRL (1U << 17) +#define A10_MMC_CKCR_CCLK_DIV 0xff + +/* A10_MMC_TMOR */ +#define A10_MMC_TMOR_RTO_LMT_SHIFT(x) x /* Response timeout limit */ +#define A10_MMC_TMOR_RTO_LMT_MASK 0xff +#define A10_MMC_TMOR_DTO_LMT_SHIFT(x) (x << 8) /* Data timeout limit */ +#define A10_MMC_TMOR_DTO_LMT_MASK 0xffffff + +/* A10_MMC_BWDR */ +#define A10_MMC_BWDR1 0 +#define A10_MMC_BWDR4 1 +#define A10_MMC_BWDR8 2 /* A10_MMC_CMDR */ -#define A10_MMC_RESP_EXP (1U << 6) -#define A10_MMC_LONG_RESP (1U << 7) -#define A10_MMC_CHECK_RESP_CRC (1U << 8) -#define A10_MMC_DATA_EXP (1U << 9) -#define A10_MMC_WRITE (1U << 10) -#define A10_MMC_SEQ_MODE (1U << 11) -#define A10_MMC_SEND_AUTOSTOP (1U << 12) -#define A10_MMC_WAIT_PREOVER (1U << 13) -#define A10_MMC_STOP_ABORT_CMD (1U << 14) -#define A10_MMC_SEND_INIT_SEQ (1U << 15) -#define A10_MMC_UPCLK_ONLY (1U << 21) -#define A10_MMC_RDCEATADEV (1U << 22) -#define A10_MMC_CCS_EXP (1U << 23) -#define A10_MMC_ENB_BOOT (1U << 24) -#define A10_MMC_ALT_BOOT_OPT (1U << 25) -#define A10_MMC_BOOT_ACK_EXP (1U << 26) -#define A10_MMC_DISABLE_BOOT (1U << 27) -#define A10_MMC_VOL_SWITCH (1U << 28) -#define A10_MMC_START (1U << 31) - -/* A10_MMC_IMASK and A10_MMC_RINTR */ -#define A10_MMC_RESP_ERR (1U << 1) -#define A10_MMC_CMD_DONE (1U << 2) -#define A10_MMC_DATA_OVER (1U << 3) -#define A10_MMC_TX_DATA_REQ (1U << 4) -#define A10_MMC_RX_DATA_REQ (1U << 5) -#define A10_MMC_RESP_CRC_ERR (1U << 6) -#define A10_MMC_DATA_CRC_ERR (1U << 7) -#define A10_MMC_RESP_TIMEOUT (1U << 8) -#define A10_MMC_ACK_RECV (1U << 8) -#define A10_MMC_DATA_TIMEOUT (1U << 9) -#define A10_MMC_BOOT_START (1U << 9) -#define A10_MMC_DATA_STARVE (1U << 10) -#define A10_MMC_VOL_CHG_DONE (1U << 10) -#define A10_MMC_FIFO_RUN_ERR (1U << 11) -#define A10_MMC_HARDW_LOCKED (1U << 12) -#define A10_MMC_START_BIT_ERR (1U << 13) -#define A10_MMC_AUTOCMD_DONE (1U << 14) -#define A10_MMC_END_BIT_ERR (1U << 15) -#define A10_MMC_SDIO_INT (1U << 16) -#define A10_MMC_CARD_INSERT (1U << 30) -#define A10_MMC_CARD_REMOVE (1U << 31) +#define A10_MMC_CMDR_RESP_RCV (1U << 6) +#define A10_MMC_CMDR_LONG_RESP (1U << 7) +#define A10_MMC_CMDR_CHK_RESP_CRC (1U << 8) +#define A10_MMC_CMDR_DATA_TRANS (1U << 9) +#define A10_MMC_CMDR_DIR_WRITE (1U << 10) +#define A10_MMC_CMDR_TRANS_MODE_STREAM (1U << 11) +#define A10_MMC_CMDR_STOP_CMD_FLAG (1U << 12) +#define A10_MMC_CMDR_WAIT_PRE_OVER (1U << 13) +#define A10_MMC_CMDR_STOP_ABT_CMD (1U << 14) +#define A10_MMC_CMDR_SEND_INIT_SEQ (1U << 15) +#define A10_MMC_CMDR_PRG_CLK (1U << 21) +#define A10_MMC_CMDR_RD_CEDATA_DEV (1U << 22) +#define A10_MMC_CMDR_CCS_EXP (1U << 23) +#define A10_MMC_CMDR_BOOT_MOD_SHIFT 24 +#define A10_MMC_CMDR_BOOT_MOD_NORMAL 0 +#define A10_MMC_CMDR_BOOT_MOD_MANDATORY 1 +#define A10_MMC_CMDR_BOOT_MOD_ALT 2 +#define A10_MMC_CMDR_EXP_BOOT_ACK (1U << 26) +#define A10_MMC_CMDR_BOOT_ABT (1U << 27) +#define A10_MMC_CMDR_VOL_SW (1U << 28) +#define A10_MMC_CMDR_LOAD (1U << 31) + +/* A10_MMC_IMKR and A10_MMC_RISR */ +#define A10_MMC_INT_RESP_ERR (1U << 1) +#define A10_MMC_INT_CMD_DONE (1U << 2) +#define A10_MMC_INT_DATA_OVER (1U << 3) +#define A10_MMC_INT_TX_DATA_REQ (1U << 4) +#define A10_MMC_INT_RX_DATA_REQ (1U << 5) +#define A10_MMC_INT_RESP_CRC_ERR (1U << 6) +#define A10_MMC_INT_DATA_CRC_ERR (1U << 7) +#define A10_MMC_INT_RESP_TIMEOUT (1U << 8) +#define A10_MMC_INT_BOOT_ACK_RECV (1U << 8) +#define A10_MMC_INT_DATA_TIMEOUT (1U << 9) +#define A10_MMC_INT_BOOT_START (1U << 9) +#define A10_MMC_INT_DATA_STARVE (1U << 10) +#define A10_MMC_INT_VOL_CHG_DONE (1U << 10) +#define A10_MMC_INT_FIFO_RUN_ERR (1U << 11) +#define A10_MMC_INT_CMD_BUSY (1U << 12) +#define A10_MMC_INT_DATA_START_ERR (1U << 13) +#define A10_MMC_INT_AUTO_STOP_DONE (1U << 14) +#define A10_MMC_INT_DATA_END_BIT_ERR (1U << 15) +#define A10_MMC_INT_SDIO (1U << 16) +#define A10_MMC_INT_CARD_INSERT (1U << 30) +#define A10_MMC_INT_CARD_REMOVE (1U << 31) #define A10_MMC_INT_ERR_BIT \ - (A10_MMC_RESP_ERR | A10_MMC_RESP_CRC_ERR | \ - A10_MMC_DATA_CRC_ERR | A10_MMC_RESP_TIMEOUT | \ - A10_MMC_FIFO_RUN_ERR | A10_MMC_HARDW_LOCKED | \ - A10_MMC_START_BIT_ERR | A10_MMC_END_BIT_ERR) - -/* A10_MMC_STAS */ -#define A10_MMC_RX_WLFLAG (1U << 0) -#define A10_MMC_TX_WLFLAG (1U << 1) -#define A10_MMC_FIFO_EMPTY (1U << 2) -#define A10_MMC_FIFO_FULL (1U << 3) -#define A10_MMC_CARD_PRESENT (1U << 8) -#define A10_MMC_CARD_DATA_BUSY (1U << 9) -#define A10_MMC_DATA_FSM_BUSY (1U << 10) -#define A10_MMC_DMA_REQ (1U << 31) -#define A10_MMC_FIFO_SIZE 16 + (A10_MMC_INT_RESP_ERR | A10_MMC_INT_RESP_CRC_ERR | \ + A10_MMC_INT_DATA_CRC_ERR | A10_MMC_INT_RESP_TIMEOUT | \ + A10_MMC_INT_FIFO_RUN_ERR | A10_MMC_INT_CMD_BUSY | \ + A10_MMC_INT_DATA_START_ERR | A10_MMC_INT_DATA_END_BIT_ERR) + +/* A10_MMC_STAR */ +#define A10_MMC_STAR_FIFO_RX_LEVEL (1U << 0) +#define A10_MMC_STAR_FIFO_TX_LEVEL (1U << 1) +#define A10_MMC_STAR_FIFO_EMPTY (1U << 2) +#define A10_MMC_STAR_FIFO_FULL (1U << 3) +#define A10_MMC_STAR_CARD_PRESENT (1U << 8) +#define A10_MMC_STAR_CARD_BUSY (1U << 9) +#define A10_MMC_STAR_FSM_BUSY (1U << 10) +#define A10_MMC_STAR_DMA_REQ (1U << 31) /* A10_MMC_FUNS */ #define A10_MMC_CE_ATA_ON (0xceaaU << 16) @@ -151,52 +154,51 @@ #define A10_MMC_CE_ATA_DEV_INT_ENB (1U << 10) /* IDMA CONTROLLER BUS MOD BIT FIELD */ -#define A10_MMC_IDMAC_SOFT_RST (1U << 0) -#define A10_MMC_IDMAC_FIX_BURST (1U << 1) -#define A10_MMC_IDMAC_IDMA_ON (1U << 7) -#define A10_MMC_IDMAC_REFETCH_DES (1U << 31) +#define A10_MMC_DMAC_IDMAC_SOFT_RST (1U << 0) +#define A10_MMC_DMAC_IDMAC_FIX_BURST (1U << 1) +#define A10_MMC_DMAC_IDMAC_IDMA_ON (1U << 7) +#define A10_MMC_DMAC_IDMAC_REFETCH_DES (1U << 31) /* A10_MMC_IDST */ -#define A10_MMC_IDMAC_TRANSMIT_INT (1U << 0) -#define A10_MMC_IDMAC_RECEIVE_INT (1U << 1) -#define A10_MMC_IDMAC_FATAL_BUS_ERR (1U << 2) -#define A10_MMC_IDMAC_DES_INVALID (1U << 4) -#define A10_MMC_IDMAC_CARD_ERR_SUM (1U << 5) -#define A10_MMC_IDMAC_NORMAL_INT_SUM (1U << 8) -#define A10_MMC_IDMAC_ABNORMAL_INT_SUM (1U << 9) -#define A10_MMC_IDMAC_HOST_ABT_INTX (1U << 10) -#define A10_MMC_IDMAC_HOST_ABT_INRX (1U << 10) -#define A10_MMC_IDMAC_IDLE (0U << 13) -#define A10_MMC_IDMAC_SUSPEND (1U << 13) -#define A10_MMC_IDMAC_DESC_RD (2U << 13) -#define A10_MMC_IDMAC_DESC_CHECK (3U << 13) -#define A10_MMC_IDMAC_RD_REQ_WAIT (4U << 13) -#define A10_MMC_IDMAC_WR_REQ_WAIT (5U << 13) -#define A10_MMC_IDMAC_RD (6U << 13) -#define A10_MMC_IDMAC_WR (7U << 13) -#define A10_MMC_IDMAC_DESC_CLOSE (8U << 13) -#define A10_MMC_IDMAC_ERROR \ - (A10_MMC_IDMAC_FATAL_BUS_ERR | A10_MMC_IDMAC_CARD_ERR_SUM | \ - A10_MMC_IDMAC_DES_INVALID | A10_MMC_IDMAC_ABNORMAL_INT_SUM) -#define A10_MMC_IDMAC_COMPLETE \ - (A10_MMC_IDMAC_TRANSMIT_INT | A10_MMC_IDMAC_RECEIVE_INT) +#define A10_MMC_IDST_TX_INT (1U << 0) +#define A10_MMC_IDST_RX_INT (1U << 1) +#define A10_MMC_IDST_FATAL_BERR_INT (1U << 2) +#define A10_MMC_IDST_DES_UNAVL_INT (1U << 4) +#define A10_MMC_IDST_ERR_FLAG_SUM (1U << 5) +#define A10_MMC_IDST_NOR_INT_SUM (1U << 8) +#define A10_MMC_IDST_ABN_INT_SUM (1U << 9) +#define A10_MMC_IDST_HOST_ABT_INTX (1U << 10) +#define A10_MMC_IDST_HOST_ABT_INRX (1U << 10) +#define A10_MMC_IDST_IDLE (0U << 13) +#define A10_MMC_IDST_SUSPEND (1U << 13) +#define A10_MMC_IDST_DESC_RD (2U << 13) +#define A10_MMC_IDST_DESC_CHECK (3U << 13) +#define A10_MMC_IDST_RD_REQ_WAIT (4U << 13) +#define A10_MMC_IDST_WR_REQ_WAIT (5U << 13) +#define A10_MMC_IDST_RD (6U << 13) +#define A10_MMC_IDST_WR (7U << 13) +#define A10_MMC_IDST_DESC_CLOSE (8U << 13) +#define A10_MMC_IDST_ERROR \ + (A10_MMC_IDST_FATAL_BERR_INT | A10_MMC_IDST_ERR_FLAG_SUM | \ + A10_MMC_IDST_DES_UNAVL_INT | A10_MMC_IDST_ABN_INT_SUM) +#define A10_MMC_IDST_COMPLETE \ + (A10_MMC_IDST_TX_INT | A10_MMC_IDST_RX_INT) /* The DMA descriptor table. */ struct a10_mmc_dma_desc { uint32_t config; -#define A10_MMC_DMA_CONFIG_DIC (1U << 1) -#define A10_MMC_DMA_CONFIG_LD (1U << 2) -#define A10_MMC_DMA_CONFIG_FD (1U << 3) -#define A10_MMC_DMA_CONFIG_CH (1U << 4) -#define A10_MMC_DMA_CONFIG_ER (1U << 5) -#define A10_MMC_DMA_CONFIG_CES (1U << 30) -#define A10_MMC_DMA_CONFIG_OWN (1U << 31) +#define A10_MMC_DMA_CONFIG_DIC (1U << 1) /* Disable Interrupt Completion */ +#define A10_MMC_DMA_CONFIG_LD (1U << 2) /* Last DES */ +#define A10_MMC_DMA_CONFIG_FD (1U << 3) /* First DES */ +#define A10_MMC_DMA_CONFIG_CH (1U << 4) /* CHAIN MOD */ +#define A10_MMC_DMA_CONFIG_ER (1U << 5) /* End of Ring (undocumented register) */ +#define A10_MMC_DMA_CONFIG_CES (1U << 30) /* Card Error Summary */ +#define A10_MMC_DMA_CONFIG_OWN (1U << 31) /* DES Own Flag */ uint32_t buf_size; uint32_t buf_addr; uint32_t next; }; -/* DMA descriptors and data buffers must be aligned to 32-bits */ -#define A10_MMC_DMA_ALIGN 4 +#define A10_MMC_DMA_ALIGN 4 #endif /* _A10_MMC_H_ */ _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "[email protected]"
