Author: trasz
Date: Mon Apr 16 15:49:16 2018
New Revision: 332579
URL: https://svnweb.freebsd.org/changeset/base/332579

Log:
  MFC r327382:
  
  Improve usbconfig(8) manual page by adding descriptions for subcommands.

Modified:
  stable/11/usr.sbin/usbconfig/usbconfig.8
Directory Properties:
  stable/11/   (props changed)

Modified: stable/11/usr.sbin/usbconfig/usbconfig.8
==============================================================================
--- stable/11/usr.sbin/usbconfig/usbconfig.8    Mon Apr 16 15:48:15 2018        
(r332578)
+++ stable/11/usr.sbin/usbconfig/usbconfig.8    Mon Apr 16 15:49:16 2018        
(r332579)
@@ -23,7 +23,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd January 6, 2010
+.Dd December 30, 2017
 .Dt USBCONFIG 8
 .Os
 .Sh NAME
@@ -56,45 +56,124 @@ The unit and address coordinates may be prefixed by th
 Show help and available commands.
 .El
 .Pp
-When called without options,
+The following commands may be used with
+.Nm :
+.Bl -tag -width indent
+.It Cm set_config Ar cfg_index
+Choose the configuration for the USB device.
+Valid values range from zero to the number reported as the
+.Ar bNumConfigurations
+in
+.Cm dump_device_desc
+output.
+The special value of 255 unconfigures the device, detaching
+the interface drivers and reducing the power consumption to minimum,
+but without going into power saving mode or detaching from the bus.
+In some cases, it prevents the device from charging.
+.It Cm set_alt Ar alt_index
+Choose the alternate interface for the USB device.
+Alternative settings for the current configuration are available as the
+.Ar bAlternateSetting
+in
+.Cm dump_curr_config_desc
+output.
+Usually there is no need to adjust this setting.
+.It Cm set_template Ar template
+Set the global USB device side template.
+See
+.Xr usb_template 4
+for more information.
+.It Cm get_template
+Get the current USB device side template.
+.It Cm add_dev_quirk_vplh Ar vid Ar pid Ar lo_rev Ar hi_rev Ar quirk_name
+Add a quirk by specifying the Vendor ID, Product ID, low and high
+revision numbers, and the quirk name.
+See
+.Xr usb_quirk 4
+for more information.
+.It Cm remove_dev_quirk_vplh Ar vid Ar pid Ar lo_rev Ar hi_rev Ar quirk_name
+Remove a quirk.
+.It Cm add_quirk Ar quirk_name
+Add quirk for the currently selected USB device.
+.It Cm remove_quirk Ar quirk_name
+Remove a quirk for the currently selected USB device.
+.It Cm dump_quirk_names
+Display the list of supported quirk names.
+.It Cm dump_device_quirks
+Display the list of current device quirks.
+.It Cm dump_device_desc
+Display the device descriptor.
+.It Cm dump_curr_config_desc
+Display current configuration descriptor.
+.It Cm dump_all_config_desc
+Display all the configuration descriptors.
+.It Cm dump_string Ar index
+Display string descriptor at selected index.
+.It Cm dump_info
+Display summary information about the device.
+.It Cm show_ifdrv
+Display the list of interface drivers (such as
+.Xr ukbd 4
+or
+.Xr u3g 4 )
+currently attached to the device.
+.It Cm suspend
+Force the device to suspend.
+.It Cm resume
+Force the device to resume.
+.It Cm power_off
+Turn the device off.
+.It Cm power_save
+Turn the automatic suspend and resume on.
+This is the default for USB hubs.
+.It Cm power_on
+Turn the device on and disable automatic suspend and resume.
+This is the default for non-hub devices.
+.It Cm reset
+Reset the device.
+This forces the USB stack to reenumerate the bus.
+.It Cm list
+List all available USB devices.
+This is the default if
 .Nm
-prints a list of all available USB devices.
+is called without specifying a command.
+.It Cm do_request Ar bmReqTyp Ar bReq Ar wVal Ar wIdx Ar wLen Ar data...
+Perform a synchronous control request on the specified device.
+See
+.Xr libusb20_dev_request_sync 3
+for more information.
+.El
 .Sh EXAMPLES
+.Pp
 Show information about the device on USB bus 1 at address 2:
 .Pp
-.Dl usbconfig -u 1 -a 2 dump_info
+.Dl usbconfig -d ugen1.2 dump_info
 .Pp
 Dump HID descriptor for device on USB bus 1 at address 2:
 .Pp
-.Dl usbconfig -u 1 -a 2 do_request 0x81 0x06 0x2200 0 0x100
+.Dl usbconfig -d ugen1.2 do_request 0x81 0x06 0x2200 0 0x100
 .Pp
 Dump string descriptor at index Z for device on USB bus 1 at address 2:
 .Pp
-.Dl usbconfig -u 1 -a 2 dump_string Z
+.Dl usbconfig -d ugen1.2 dump_string Z
 .Pp
 Dump current configuration descriptor for device on USB bus 1 at address 2:
 .Pp
-.Dl usbconfig -u 1 -a 2 dump_curr_config_desc
+.Dl usbconfig -d ugen1.2 dump_curr_config_desc
 .Pp
 Dump device descriptor for device on USB bus 1 at address 2:
 .Pp
-.Dl usbconfig -u 1 -a 2 dump_device_desc
+.Dl usbconfig -d ugen1.2 dump_device_desc
 .Pp
 Program the device on USB bus 1 at address 2 to suspend, resume, power off, go 
into power save, or power on:
 .Pp
-.Dl usbconfig -u 1 -a 2 suspend
-.Dl usbconfig -u 1 -a 2 resume
-.Dl usbconfig -u 1 -a 2 power_off
-.Dl usbconfig -u 1 -a 2 power_save
-.Dl usbconfig -u 1 -a 2 power_on
+.Dl usbconfig -d ugen1.2 suspend
+.Dl usbconfig -d ugen1.2 resume
+.Dl usbconfig -d ugen1.2 power_off
+.Dl usbconfig -d ugen1.2 power_save
+.Dl usbconfig -d ugen1.2 power_on
 .Pp
-Display a list of available quirk names:
-.Pp
-.Dl usbconfig dump_quirk_names
-.Pp
-See
-.Xr usb_quirk 4
-for more information on quirks.
 .Sh SEE ALSO
 .Xr usb 4 ,
-.Xr usb_quirk 4
+.Xr usb_quirk 4 ,
+.Xr usb_template 4
_______________________________________________
svn-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"

Reply via email to