Author: adrian
Date: Thu Mar 10 06:09:55 2011
New Revision: 219445
URL: http://svn.freebsd.org/changeset/base/219445
Log:
Now that the power curve adjustment code is in, disable the error check
I introduced earlier, and turn it into debugging output.
Modified:
head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c
Modified: head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c Thu Mar 10 06:08:24
2011 (r219444)
+++ head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c Thu Mar 10 06:09:55
2011 (r219445)
@@ -266,12 +266,9 @@ ar9280Attach(uint16_t devid, HAL_SOFTC s
* This can occur with eeprom minor V21 or greater on Merlin.
*/
(void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET,
&pwr_table_offset);
- if (pwr_table_offset != AR5416_PWR_TABLE_OFFSET_DB) {
- ath_hal_printf(ah, "ERROR: default pwr offset: %d dBm != EEPROM
pwr offset: %d dBm\n",
+ if (pwr_table_offset != AR5416_PWR_TABLE_OFFSET_DB)
+ ath_hal_printf(ah, "[ath]: default pwr offset: %d dBm != EEPROM
pwr offset: %d dBm; curves will be adjusted.\n",
AR5416_PWR_TABLE_OFFSET_DB, (int) pwr_table_offset);
- ecode = HAL_ENOTSUPP;
- goto bad;
- }
if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
/* setup rxgain table */
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "[email protected]"
