Author: andrew
Date: Tue Jul 28 11:32:45 2020
New Revision: 363647
URL: https://svnweb.freebsd.org/changeset/base/363647
Log:
Add a workaround for a bug when setting the Raspberry GIO config and state
The Raspberry Pi GPIO config and state messages incorrectly return with
the tag length set to 0. We then check this value to have the response
flag set. Work around this by setting the response flag when setting the
GPIO config or state and this value is zero.
Sponsored by: Innovate UK
Modified:
head/sys/arm/broadcom/bcm2835/bcm2835_mbox.c
Modified: head/sys/arm/broadcom/bcm2835/bcm2835_mbox.c
==============================================================================
--- head/sys/arm/broadcom/bcm2835/bcm2835_mbox.c Tue Jul 28 11:23:37
2020 (r363646)
+++ head/sys/arm/broadcom/bcm2835/bcm2835_mbox.c Tue Jul 28 11:32:45
2020 (r363647)
@@ -43,6 +43,7 @@ __FBSDID("$FreeBSD$");
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
+#include <arm/broadcom/bcm2835/bcm2835_firmware.h>
#include <arm/broadcom/bcm2835/bcm2835_mbox.h>
#include <arm/broadcom/bcm2835/bcm2835_mbox_prop.h>
#include <arm/broadcom/bcm2835/bcm2835_vcbus.h>
@@ -362,6 +363,16 @@ bcm2835_mbox_err(device_t dev, bus_addr_t msg_phys, ui
tag = (struct bcm2835_mbox_tag_hdr *)(msg + 1);
last = (uint8_t *)msg + len;
for (idx = 0; tag->tag != 0; idx++) {
+ /*
+ * When setting the GPIO config or state the firmware doesn't
+ * set tag->val_len correctly.
+ */
+ if ((tag->tag == BCM2835_FIRMWARE_TAG_SET_GPIO_CONFIG ||
+ tag->tag == BCM2835_FIRMWARE_TAG_SET_GPIO_STATE) &&
+ tag->val_len == 0) {
+ tag->val_len = BCM2835_MBOX_TAG_VAL_LEN_RESPONSE |
+ tag->val_buf_size;
+ }
if ((tag->val_len & BCM2835_MBOX_TAG_VAL_LEN_RESPONSE) == 0) {
device_printf(dev, "tag %d response error\n", idx);
return (EIO);
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
