Author: mmel
Date: Fri Dec 4 15:23:43 2020
New Revision: 368334
URL: https://svnweb.freebsd.org/changeset/base/368334
Log:
Add a driver for FAN53555 based PMIC.
Added:
head/sys/dev/iicbus/pmic/fan53555.c (contents, props changed)
Added: head/sys/dev/iicbus/pmic/fan53555.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/dev/iicbus/pmic/fan53555.c Fri Dec 4 15:23:43 2020
(r368334)
@@ -0,0 +1,477 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2016 Jared McNeill <jmcne...@invisible.ca>
+ * Copyright (c) 2018 Emmanuel Vadot <m...@freebsd.org>
+ * Copyright (c) 2019 Michal Meloun <m...@freebsd.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/bus.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/mutex.h>
+#include <sys/rman.h>
+#include <machine/bus.h>
+
+#include <dev/iicbus/iiconf.h>
+#include <dev/iicbus/iicbus.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <dev/extres/regulator/regulator.h>
+
+#include "regdev_if.h"
+
+/* Registers */
+#define FAN53555_VSEL0 0x00
+#define FAN53555_VSEL1 0x01
+#define FAN53555_VSEL_ENA (1 << 7)
+#define FAN53555_VSEL_MODE (1 << 6)
+#define FAN53555_VSEL_MASK 0x3f
+#define FAN53555_CTRL 0x02
+#define FAN53555_ID1 0x03
+#define FAN53555_ID1_DIE_ID(x) (((x) >> 4) & 0x0F)
+#define FAN53555_ID2 0x04
+#define FAN53555_ID2_DIE_REV(x) (((x) >> 4) & 0x0F)
+#define FAN53555_MON 0x05
+
+
+#if 0
+#define dprintf(sc, format, arg...)
\
+ device_printf(sc->base_dev, "%s: " format, __func__, arg)
+#else
+#define dprintf(sc, format, arg...)
+#endif
+
+enum fan53555_pmic_type {
+ FAN53555 = 1,
+ SYR827,
+ SYR828,
+};
+
+static struct ofw_compat_data compat_data[] = {
+ {"fcs,fan53555", FAN53555},
+ {"silergy,syr827", SYR827},
+ {"silergy,syr828", SYR828},
+ {NULL, 0}
+};
+
+struct fan53555_reg_sc {
+ struct regnode *regnode;
+ char *name;
+ device_t base_dev;
+ uint8_t live_reg;
+ uint8_t sleep_reg;
+ struct regulator_range *range;
+ struct regnode_std_param *param;
+};
+
+struct fan53555_softc {
+ device_t dev;
+ uint8_t live_reg;
+ uint8_t sleep_reg;
+};
+
+static struct regulator_range syr_8_range =
+ REG_RANGE_INIT( 0, 0x3F, 712500, 12500);
+
+static struct regulator_range fan_0_0_range =
+ REG_RANGE_INIT( 0, 0x3F, 600000, 10000);
+static struct regulator_range fan_0_13_range =
+ REG_RANGE_INIT( 0, 0x3F, 800000, 10000);
+static struct regulator_range fan_1_range =
+ REG_RANGE_INIT( 0, 0x3F, 600000, 10000);
+static struct regulator_range fan_4_range =
+ REG_RANGE_INIT( 0, 0x3F, 603000, 12826);
+
+
+static int
+fan53555_read(device_t dev, uint8_t reg, uint8_t *val)
+{
+ uint8_t addr;
+ int rv;
+ struct iic_msg msgs[2] = {
+ {0, IIC_M_WR | IIC_M_NOSTOP, 1, &addr},
+ {0, IIC_M_RD, 1, val},
+ };
+
+ msgs[0].slave = iicbus_get_addr(dev);
+ msgs[1].slave = iicbus_get_addr(dev);
+ addr = reg;
+
+ rv = iicbus_transfer_excl(dev, msgs, 2, IIC_INTRWAIT);
+ if (rv != 0) {
+ device_printf(dev, "Error when reading reg 0x%02X, rv: %d\n",
+ reg, rv);
+ return (EIO);
+ }
+
+ return (0);
+}
+
+static int
+fan53555_write(device_t dev, uint8_t reg, uint8_t val)
+{
+ uint8_t data[2];
+ int rv;
+
+ struct iic_msg msgs[1] = {
+ {0, IIC_M_WR, 2, data},
+ };
+
+ msgs[0].slave = iicbus_get_addr(dev);
+ data[0] = reg;
+ data[1] = val;
+
+ rv = iicbus_transfer_excl(dev, msgs, 1, IIC_INTRWAIT);
+ if (rv != 0) {
+ device_printf(dev,
+ "Error when writing reg 0x%02X, rv: %d\n", reg, rv);
+ return (EIO);
+ }
+ return (0);
+}
+
+static int
+fan53555_read_sel(struct fan53555_reg_sc *sc, uint8_t *sel)
+{
+ int rv;
+
+ rv = fan53555_read(sc->base_dev, sc->live_reg, sel);
+ if (rv != 0)
+ return (rv);
+ *sel &= FAN53555_VSEL_MASK;
+ return (0);
+}
+
+static int
+fan53555_write_sel(struct fan53555_reg_sc *sc, uint8_t sel)
+{
+ int rv;
+ uint8_t reg;
+
+ rv = fan53555_read(sc->base_dev, sc->live_reg, ®);
+ if (rv != 0)
+ return (rv);
+ reg &= ~FAN53555_VSEL_MASK;
+ reg |= sel;
+
+ rv = fan53555_write(sc->base_dev, sc->live_reg, reg);
+ if (rv != 0)
+ return (rv);
+ return (rv);
+}
+
+static int
+fan53555_regnode_init(struct regnode *regnode)
+{
+ return (0);
+}
+
+static int
+fan53555_regnode_enable(struct regnode *regnode, bool enable, int *udelay)
+{
+ struct fan53555_reg_sc *sc;
+ uint8_t val;
+
+ sc = regnode_get_softc(regnode);
+
+ dprintf(sc, "%sabling regulator %s\n", enable ? "En" : "Dis",
+ sc->name);
+ fan53555_read(sc->base_dev, sc->live_reg, &val);
+ if (enable)
+ val |=FAN53555_VSEL_ENA;
+ else
+ val &= ~FAN53555_VSEL_ENA;
+ fan53555_write(sc->base_dev, sc->live_reg, val);
+
+ *udelay = sc->param->enable_delay;
+ return (0);
+}
+
+
+static int
+fan53555_regnode_set_voltage(struct regnode *regnode, int min_uvolt,
+ int max_uvolt, int *udelay)
+{
+ struct fan53555_reg_sc *sc;
+ uint8_t sel;
+ int uvolt, rv;
+
+ sc = regnode_get_softc(regnode);
+
+ dprintf(sc, "Setting %s to %d<->%d uvolts\n", sc->name, min_uvolt,
+ max_uvolt);
+ rv = regulator_range_volt_to_sel8(sc->range, 1, min_uvolt, max_uvolt,
+ &sel);
+ if (rv != 0)
+ return (rv);
+ *udelay = sc->param->ramp_delay;
+ rv = fan53555_write_sel(sc, sel);
+ dprintf(sc, "Regulator %s writing sel: 0x%02X\n", sc->name, sel);
+
+ fan53555_read_sel(sc, &sel);
+ regulator_range_sel8_to_volt(sc->range, 1, sel, &uvolt);
+ dprintf(sc, "Regulator %s set to %d uvolt (sel: 0x%02X)\n", sc->name,
+ uvolt, sel);
+
+ return (rv);
+}
+
+static int
+fan53555_regnode_get_voltage(struct regnode *regnode, int *uvolt)
+{
+ struct fan53555_reg_sc *sc;
+ uint8_t sel;
+ int rv;
+
+ sc = regnode_get_softc(regnode);
+
+ rv = fan53555_read_sel(sc, &sel);
+ if (rv != 0)
+ return (rv);
+ rv = regulator_range_sel8_to_volt(sc->range, 1, sel, uvolt);
+ dprintf(sc, "Regulator %s is at %d uvolt ((sel: 0x%02X)\n", sc->name,
+ *uvolt, sel);
+
+ return (rv);
+}
+
+static regnode_method_t fan53555_regnode_methods[] = {
+ /* Regulator interface */
+ REGNODEMETHOD(regnode_init, fan53555_regnode_init),
+ REGNODEMETHOD(regnode_enable, fan53555_regnode_enable),
+ REGNODEMETHOD(regnode_set_voltage, fan53555_regnode_set_voltage),
+ REGNODEMETHOD(regnode_get_voltage, fan53555_regnode_get_voltage),
+ REGNODEMETHOD_END
+};
+DEFINE_CLASS_1(fan53555_regnode, fan53555_regnode_class,
+ fan53555_regnode_methods, sizeof(struct fan53555_reg_sc), regnode_class);
+
+static struct regulator_range *
+fan53555_get_range(struct fan53555_softc *sc, int type, uint8_t id,
+ uint8_t rev)
+{
+ if (type == SYR827 || type == SYR828) {
+ switch (id) {
+ case 8:
+ return (&syr_8_range);
+ default:
+ return (NULL);
+ }
+ }
+
+ if (type == FAN53555) {
+ switch (id) {
+ case 0:
+ if (rev == 0)
+ return (&fan_0_0_range);
+ else if (rev == 13)
+ return (&fan_0_13_range);
+ else
+ return (NULL);
+ case 1:
+ case 3:
+ case 5:
+ case 8:
+ return (&fan_1_range);
+ case 4:
+ return (&fan_4_range);
+ default:
+ return (NULL);
+ }
+ }
+
+ return (NULL);
+}
+
+static struct fan53555_reg_sc *
+fan53555_reg_attach(struct fan53555_softc *sc, phandle_t node, int type)
+{
+ struct fan53555_reg_sc *reg_sc;
+ struct regnode_init_def initdef;
+ struct regnode *regnode;
+ static struct regulator_range *range;
+ uint8_t id1, id2;
+
+ memset(&initdef, 0, sizeof(initdef));
+ if (regulator_parse_ofw_stdparam(sc->dev, node, &initdef) != 0) {
+ device_printf(sc->dev, "cannot parse regulator FDT data\n");
+ return (NULL);
+ }
+
+ if (fan53555_read(sc->dev, FAN53555_ID1, &id1) != 0) {
+ device_printf(sc->dev, "cannot read ID1\n");
+ return (NULL);
+ }
+
+ if (fan53555_read(sc->dev, FAN53555_ID2, &id2) != 0) {
+ device_printf(sc->dev, "cannot read ID2\n");
+ return (NULL);
+ }
+ dprintf(sc, "Device ID1: 0x%02X, ID2: 0x%02X\n", id1, id2);
+
+ range = fan53555_get_range(sc, type, FAN53555_ID1_DIE_ID(id1),
+ FAN53555_ID2_DIE_REV(id2));
+ if (range == NULL) {
+ device_printf(sc->dev,
+ "cannot determine chip type (ID1: 0x%02X, ID2: 0x%02X)\n",
+ id1, id2);
+ return (NULL);
+ }
+
+ initdef.id = 1;
+ initdef.ofw_node = node;
+
+ regnode = regnode_create(sc->dev, &fan53555_regnode_class, &initdef);
+ if (regnode == NULL) {
+ device_printf(sc->dev, "cannot create regulator\n");
+ return (NULL);
+ }
+
+ reg_sc = regnode_get_softc(regnode);
+ reg_sc->name = "fan53555";
+ reg_sc->regnode = regnode;
+ reg_sc->base_dev = sc->dev;
+ reg_sc->param = regnode_get_stdparam(regnode);
+ reg_sc->range = range;
+ reg_sc->live_reg = sc->live_reg;
+ reg_sc->sleep_reg = sc->sleep_reg;
+
+ dprintf(sc->dev, "live_reg: %d, sleep_reg: %d\n", reg_sc->live_reg,
+ reg_sc->sleep_reg);
+
+ regnode_register(regnode);
+
+ if (bootverbose) {
+ int volt, rv;
+ regnode_topo_slock();
+ rv = regnode_get_voltage(regnode, &volt);
+ if (rv == ENODEV) {
+ device_printf(sc->dev,
+ " Regulator %s: parent doesn't exist yet.\n",
+ regnode_get_name(regnode));
+ } else if (rv != 0) {
+ device_printf(sc->dev,
+ " Regulator %s: voltage: INVALID!!!\n",
+ regnode_get_name(regnode));
+ } else {
+ device_printf(sc->dev,
+ " Regulator %s: voltage: %d uV\n",
+ regnode_get_name(regnode), volt);
+ }
+ regnode_topo_unlock();
+ }
+
+ return (reg_sc);
+}
+
+static int
+fan53555_probe(device_t dev)
+{
+ int type;
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ type = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
+ switch (type) {
+ case FAN53555:
+ device_set_desc(dev, "FAN53555 PMIC");
+ break;
+ case SYR827:
+ device_set_desc(dev, "SYR827 PMIC");
+ break;
+ case SYR828:
+ device_set_desc(dev, "SYR828 PMIC");
+ break;
+ default:
+ return (ENXIO);
+ }
+
+ return (BUS_PROBE_DEFAULT);
+}
+
+static int
+fan53555_attach(device_t dev)
+{
+ struct fan53555_softc *sc;
+ phandle_t node;
+ int type, susp_sel, rv;
+
+ sc = device_get_softc(dev);
+ sc->dev = dev;
+ node = ofw_bus_get_node(dev);
+ type = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
+
+ rv = OF_getencprop(node, "fcs,suspend-voltage-selector", &susp_sel,
+ sizeof(susp_sel));
+ if (rv <= 0)
+ susp_sel = 1;
+ if (susp_sel == 1) {
+ sc->live_reg = FAN53555_VSEL0;
+ sc->sleep_reg = FAN53555_VSEL1;
+ } else {
+ sc->live_reg = FAN53555_VSEL1;
+ sc->sleep_reg = FAN53555_VSEL0;
+ }
+ if (fan53555_reg_attach(sc, node, type) == NULL)
+ device_printf(dev, "cannot attach regulator.\n");
+
+ return (0);
+}
+
+static int
+fan53555_detach(device_t dev)
+{
+
+ /* We cannot detach regulators */
+ return (EBUSY);
+}
+
+static device_method_t fan53555_methods[] = {
+ DEVMETHOD(device_probe, fan53555_probe),
+ DEVMETHOD(device_attach, fan53555_attach),
+ DEVMETHOD(device_detach, fan53555_detach),
+
+ /* Regdev interface */
+ DEVMETHOD(regdev_map, regdev_default_ofw_map),
+
+ DEVMETHOD_END
+};
+
+static devclass_t fan53555_devclass;
+static DEFINE_CLASS_0(fan53555_pmic, fan53555_driver, fan53555_methods,
+ sizeof(struct fan53555_softc));
+
+EARLY_DRIVER_MODULE(fan53555, iicbus, fan53555_driver, fan53555_devclass, 0, 0,
+ BUS_PASS_RESOURCE);
+MODULE_VERSION(fan53555, 1);
+MODULE_DEPEND(fan53555, iicbus, IICBUS_MINVER, IICBUS_PREFVER, IICBUS_MAXVER);
+IICBUS_FDT_PNP_INFO(compat_data);
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
