Author: adrian Date: Fri Feb 14 04:03:17 2014 New Revision: 261869 URL: http://svnweb.freebsd.org/changeset/base/261869
Log: Add the ath0 EEPROM hints required to detect the on-chip wifi. This allows the on-chip wifi to work; however it's not yet fully tested. ath0: Vendor=0x168c, Device=0x0031 ath0: Vendor=0x168c, Device=0x0031 ath0: <Atheros AR934x> at mem 0x18100000-0x1811ffff irq 0 on nexus0 ... ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams Tested: * DB120 development board Modified: head/sys/mips/conf/DB120.hints Modified: head/sys/mips/conf/DB120.hints ============================================================================== --- head/sys/mips/conf/DB120.hints Fri Feb 14 03:45:49 2014 (r261868) +++ head/sys/mips/conf/DB120.hints Fri Feb 14 04:03:17 2014 (r261869) @@ -50,6 +50,16 @@ hint.arge.1.media=1000 hint.arge.1.fduplex=1 hint.arge.1.miimode=1 # GMII +# ath0: Where the ART is - last 64k in the flash +hint.ath.0.eepromaddr=0x1fff0000 +hint.ath.0.eepromsize=16384 + +# ath1: it's different; it's a PCIe attached device, so +# we instead need to teach the PCIe bridge code about it +# (ie, the 'early pci fixup' stuff that programs the PCIe +# host registers on the NIC) and then we teach ath where +# to find it. + # flash layout: # # bootargs=console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART) _______________________________________________ svn-src-head@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
