Author: jfv
Date: Thu Jun 26 21:33:32 2014
New Revision: 267935
URL: http://svnweb.freebsd.org/changeset/base/267935
Log:
Sync the E1000 shared code with Intel internal, this adds fixes,
and more importantly, new I218 adapter support to the em driver.
MFC after: 1 week
Modified:
head/sys/dev/e1000/e1000_82542.c
head/sys/dev/e1000/e1000_82571.c
head/sys/dev/e1000/e1000_82575.c
head/sys/dev/e1000/e1000_82575.h
head/sys/dev/e1000/e1000_api.c
head/sys/dev/e1000/e1000_api.h
head/sys/dev/e1000/e1000_defines.h
head/sys/dev/e1000/e1000_hw.h
head/sys/dev/e1000/e1000_i210.c
head/sys/dev/e1000/e1000_i210.h
head/sys/dev/e1000/e1000_ich8lan.c
head/sys/dev/e1000/e1000_ich8lan.h
head/sys/dev/e1000/e1000_mac.c
head/sys/dev/e1000/e1000_mac.h
head/sys/dev/e1000/e1000_manage.c
head/sys/dev/e1000/e1000_mbx.c
head/sys/dev/e1000/e1000_mbx.h
head/sys/dev/e1000/e1000_nvm.c
head/sys/dev/e1000/e1000_osdep.h
head/sys/dev/e1000/e1000_phy.c
head/sys/dev/e1000/e1000_phy.h
head/sys/dev/e1000/e1000_regs.h
head/sys/dev/e1000/e1000_vf.c
head/sys/dev/e1000/e1000_vf.h
head/sys/dev/e1000/if_em.c
Modified: head/sys/dev/e1000/e1000_82542.c
==============================================================================
--- head/sys/dev/e1000/e1000_82542.c Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_82542.c Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2010, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -47,7 +47,7 @@ static s32 e1000_init_hw_82542(struct e
static s32 e1000_setup_link_82542(struct e1000_hw *hw);
static s32 e1000_led_on_82542(struct e1000_hw *hw);
static s32 e1000_led_off_82542(struct e1000_hw *hw);
-static void e1000_rar_set_82542(struct e1000_hw *hw, u8 *addr, u32 index);
+static int e1000_rar_set_82542(struct e1000_hw *hw, u8 *addr, u32 index);
static void e1000_clear_hw_cntrs_82542(struct e1000_hw *hw);
static s32 e1000_read_mac_addr_82542(struct e1000_hw *hw);
@@ -409,7 +409,7 @@ static s32 e1000_led_off_82542(struct e1
* Sets the receive address array register at index to the address passed
* in by addr.
**/
-static void e1000_rar_set_82542(struct e1000_hw *hw, u8 *addr, u32 index)
+static int e1000_rar_set_82542(struct e1000_hw *hw, u8 *addr, u32 index)
{
u32 rar_low, rar_high;
@@ -431,6 +431,7 @@ static void e1000_rar_set_82542(struct e
E1000_WRITE_REG_ARRAY(hw, E1000_RA, (index << 1), rar_low);
E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((index << 1) + 1), rar_high);
+ return E1000_SUCCESS;
}
/**
Modified: head/sys/dev/e1000/e1000_82571.c
==============================================================================
--- head/sys/dev/e1000/e1000_82571.c Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_82571.c Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -1453,10 +1453,14 @@ static void e1000_clear_vfta_82571(struc
static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
{
u16 data;
+ s32 ret_val;
DEBUGFUNC("e1000_check_mng_mode_82574");
- hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+ if (ret_val)
+ return FALSE;
+
return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
}
Modified: head/sys/dev/e1000/e1000_82575.c
==============================================================================
--- head/sys/dev/e1000/e1000_82575.c Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_82575.c Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -56,7 +56,6 @@ static s32 e1000_check_for_link_media_s
static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw);
static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed,
u16 *duplex);
-static s32 e1000_init_hw_82575(struct e1000_hw *hw);
static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw);
static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
u16 *data);
@@ -120,7 +119,8 @@ static bool e1000_get_i2c_data(u32 *i2cc
static const u16 e1000_82580_rxpbs_table[] = {
36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
#define E1000_82580_RXPBS_TABLE_SIZE \
- (sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
+ (sizeof(e1000_82580_rxpbs_table) / \
+ sizeof(e1000_82580_rxpbs_table[0]))
/**
@@ -273,6 +273,11 @@ static s32 e1000_init_phy_params_82575(s
hw->mac.ops.check_for_link =
e1000_check_for_link_media_swap;
}
+ if (phy->id == M88E1512_E_PHY_ID) {
+ ret_val = e1000_initialize_M88E1512_phy(hw);
+ if (ret_val)
+ goto out;
+ }
break;
case IGP03E1000_E_PHY_ID:
case IGP04E1000_E_PHY_ID:
@@ -450,6 +455,9 @@ static s32 e1000_init_mac_params_82575(s
else
mac->ops.reset_hw = e1000_reset_hw_82575;
/* hw initialization */
+ if ((mac->type == e1000_i210) || (mac->type == e1000_i211))
+ mac->ops.init_hw = e1000_init_hw_i210;
+ else
mac->ops.init_hw = e1000_init_hw_82575;
/* link setup */
mac->ops.setup_link = e1000_setup_link_generic;
@@ -750,6 +758,7 @@ out:
static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
{
s32 ret_val = E1000_SUCCESS;
+ struct e1000_phy_info *phy = &hw->phy;
DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575");
@@ -772,7 +781,11 @@ static s32 e1000_phy_hw_reset_sgmii_8257
goto out;
ret_val = hw->phy.ops.commit(hw);
+ if (ret_val)
+ goto out;
+ if (phy->id == M88E1512_E_PHY_ID)
+ ret_val = e1000_initialize_M88E1512_phy(hw);
out:
return ret_val;
}
@@ -879,7 +892,6 @@ out:
static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active)
{
struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = E1000_SUCCESS;
u32 data;
DEBUGFUNC("e1000_set_d0_lplu_state_82580");
@@ -907,7 +919,7 @@ static s32 e1000_set_d0_lplu_state_82580
}
E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data);
- return ret_val;
+ return E1000_SUCCESS;
}
/**
@@ -927,7 +939,6 @@ static s32 e1000_set_d0_lplu_state_82580
s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active)
{
struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = E1000_SUCCESS;
u32 data;
DEBUGFUNC("e1000_set_d3_lplu_state_82580");
@@ -955,7 +966,7 @@ s32 e1000_set_d3_lplu_state_82580(struct
}
E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data);
- return ret_val;
+ return E1000_SUCCESS;
}
/**
@@ -969,7 +980,7 @@ s32 e1000_set_d3_lplu_state_82580(struct
**/
static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw)
{
- s32 ret_val;
+ s32 ret_val = E1000_SUCCESS;
DEBUGFUNC("e1000_acquire_nvm_82575");
@@ -991,6 +1002,7 @@ static s32 e1000_acquire_nvm_82575(struc
DEBUGOUT("Nvm bit banging access error detected and
cleared.\n");
}
}
+
if (hw->mac.type == e1000_82580) {
u32 eecd = E1000_READ_REG(hw, E1000_EECD);
if (eecd & E1000_EECD_BLOCKED) {
@@ -1001,7 +1013,6 @@ static s32 e1000_acquire_nvm_82575(struc
}
}
-
ret_val = e1000_acquire_nvm_generic(hw);
if (ret_val)
e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
@@ -1115,7 +1126,6 @@ static void e1000_release_swfw_sync_8257
static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw)
{
s32 timeout = PHY_CFG_TIMEOUT;
- s32 ret_val = E1000_SUCCESS;
u32 mask = E1000_NVM_CFG_DONE_PORT_0;
DEBUGFUNC("e1000_get_cfg_done_82575");
@@ -1140,7 +1150,7 @@ static s32 e1000_get_cfg_done_82575(stru
(hw->phy.type == e1000_phy_igp_3))
e1000_phy_init_script_igp3(hw);
- return ret_val;
+ return E1000_SUCCESS;
}
/**
@@ -1466,7 +1476,7 @@ static s32 e1000_reset_hw_82575(struct e
*
* This inits the hardware readying it for operation.
**/
-static s32 e1000_init_hw_82575(struct e1000_hw *hw)
+s32 e1000_init_hw_82575(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
@@ -1985,7 +1995,7 @@ static s32 e1000_reset_init_script_82575
**/
static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
DEBUGFUNC("e1000_read_mac_addr_82575");
@@ -2478,11 +2488,17 @@ static s32 e1000_reset_hw_82580(struct e
ctrl |= E1000_CTRL_RST;
E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
- E1000_WRITE_FLUSH(hw);
- /* Add delay to insure DEV_RST has time to complete */
- if (global_device_reset)
- msec_delay(5);
+ switch (hw->device_id) {
+ case E1000_DEV_ID_DH89XXCC_SGMII:
+ break;
+ default:
+ E1000_WRITE_FLUSH(hw);
+ break;
+ }
+
+ /* Add delay to insure DEV_RST or RST has time to complete */
+ msec_delay(5);
ret_val = e1000_get_auto_rd_done_generic(hw);
if (ret_val) {
@@ -2617,7 +2633,7 @@ out:
**/
static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
u16 eeprom_regions_count = 1;
u16 j, nvm_data;
u16 nvm_offset;
@@ -2757,7 +2773,7 @@ out:
static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address,
u16 *data, bool read)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
DEBUGFUNC("__e1000_access_emi_reg");
@@ -2787,6 +2803,95 @@ s32 e1000_read_emi_reg(struct e1000_hw *
}
/**
+ * e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initialize Marverl 1512 to work correctly with Avoton.
+ **/
+s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_initialize_M88E1512_phy");
+
+ /* Check if this is correct PHY. */
+ if (phy->id != M88E1512_E_PHY_ID)
+ goto out;
+
+ /* Switch to PHY page 0xFF. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xCC0C);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
+ if (ret_val)
+ goto out;
+
+ /* Switch to PHY page 0xFB. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x000D);
+ if (ret_val)
+ goto out;
+
+ /* Switch to PHY page 0x12. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
+ if (ret_val)
+ goto out;
+
+ /* Change mode to SGMII-to-Copper */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
+ if (ret_val)
+ goto out;
+
+ /* Return the PHY to page 0. */
+ ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.commit(hw);
+ if (ret_val) {
+ DEBUGOUT("Error committing the PHY changes\n");
+ return ret_val;
+ }
+
+ msec_delay(1000);
+out:
+ return ret_val;
+}
+
+/**
* e1000_set_eee_i350 - Enable/disable EEE support
* @hw: pointer to the HW structure
*
@@ -2795,7 +2900,6 @@ s32 e1000_read_emi_reg(struct e1000_hw *
**/
s32 e1000_set_eee_i350(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
u32 ipcnfg, eeer;
DEBUGFUNC("e1000_set_eee_i350");
@@ -2828,7 +2932,7 @@ s32 e1000_set_eee_i350(struct e1000_hw *
E1000_READ_REG(hw, E1000_EEER);
out:
- return ret_val;
+ return E1000_SUCCESS;
}
/**
Modified: head/sys/dev/e1000/e1000_82575.h
==============================================================================
--- head/sys/dev/e1000/e1000_82575.h Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_82575.h Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -384,7 +384,7 @@ struct e1000_adv_tx_context_desc {
#define E1000_ETQF_FILTER_ENABLE (1 << 26)
#define E1000_ETQF_IMM_INT (1 << 29)
#define E1000_ETQF_1588 (1 << 30)
-#define E1000_ETQF_QUEUE_ENABLE (1U << 31)
+#define E1000_ETQF_QUEUE_ENABLE (1 << 31)
/*
* ETQF filter list: one static filter per filter consumer. This is
* to avoid filter collisions later. Add new filters
@@ -411,7 +411,7 @@ struct e1000_adv_tx_context_desc {
#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */
#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
#define E1000_DTXSWC_LLE_SHIFT 16
-#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1U << 31) /* global VF LB enable */
+#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */
/* Easy defines for setting default pool, would normally be left a zero */
#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
@@ -480,6 +480,7 @@ void e1000_vmdq_set_loopback_pf(struct e
void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf);
void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable);
s32 e1000_init_nvm_params_82575(struct e1000_hw *hw);
+s32 e1000_init_hw_82575(struct e1000_hw *hw);
enum e1000_promisc_type {
e1000_promisc_disabled = 0, /* all promisc modes disabled */
@@ -497,6 +498,7 @@ s32 e1000_read_emi_reg(struct e1000_hw *
s32 e1000_set_eee_i350(struct e1000_hw *);
s32 e1000_set_eee_i354(struct e1000_hw *);
s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *);
+s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw);
/* I2C SDA and SCL timing parameters for standard mode */
#define E1000_I2C_T_HD_STA 4
Modified: head/sys/dev/e1000/e1000_api.c
==============================================================================
--- head/sys/dev/e1000/e1000_api.c Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_api.c Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -293,6 +293,10 @@ s32 e1000_set_mac_type(struct e1000_hw *
case E1000_DEV_ID_PCH_LPT_I217_V:
case E1000_DEV_ID_PCH_LPTLP_I218_LM:
case E1000_DEV_ID_PCH_LPTLP_I218_V:
+ case E1000_DEV_ID_PCH_I218_LM2:
+ case E1000_DEV_ID_PCH_I218_V2:
+ case E1000_DEV_ID_PCH_I218_LM3:
+ case E1000_DEV_ID_PCH_I218_V3:
mac->type = e1000_pch_lpt;
break;
case E1000_DEV_ID_82575EB_COPPER:
@@ -828,10 +832,12 @@ void e1000_config_collision_dist(struct
*
* Sets a Receive Address Register (RAR) to the specified address.
**/
-void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+int e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
{
if (hw->mac.ops.rar_set)
- hw->mac.ops.rar_set(hw, addr, index);
+ return hw->mac.ops.rar_set(hw, addr, index);
+
+ return E1000_SUCCESS;
}
/**
Modified: head/sys/dev/e1000/e1000_api.h
==============================================================================
--- head/sys/dev/e1000/e1000_api.h Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_api.h Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -69,7 +69,7 @@ s32 e1000_setup_link(struct e1000_hw *hw
s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
s32 e1000_disable_pcie_master(struct e1000_hw *hw);
void e1000_config_collision_dist(struct e1000_hw *hw);
-void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+int e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count);
Modified: head/sys/dev/e1000/e1000_defines.h
==============================================================================
--- head/sys/dev/e1000/e1000_defines.h Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_defines.h Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -77,6 +77,7 @@
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
/* Physical Func Reset Done Indication */
#define E1000_CTRL_EXT_PFRSTD 0x00004000
+#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */
#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clk Gating */
@@ -131,7 +132,7 @@
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits
*/
-#define E1000_RXDEXT_STATERR_TST 0x00010000 /* Time Stamp taken */
+#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */
#define E1000_RXDEXT_STATERR_LB 0x00040000
#define E1000_RXDEXT_STATERR_CE 0x01000000
#define E1000_RXDEXT_STATERR_SE 0x02000000
@@ -464,6 +465,7 @@
#define ETHERNET_FCS_SIZE 4
#define MAX_JUMBO_FRAME_SIZE 0x3F00
+#define E1000_TX_PTR_GAP 0x1F
/* Extended Configuration Control and Size */
#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
@@ -853,6 +855,10 @@
#define E1000_PCS_STATUS_ADDR_I354 1
#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400
#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800
+#define E1000_M88E1512_CFG_REG_1 0x0010
+#define E1000_M88E1512_CFG_REG_2 0x0011
+#define E1000_M88E1512_CFG_REG_3 0x0007
+#define E1000_M88E1512_MODE 0x0014
#define E1000_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */
#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */
#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */
@@ -1429,6 +1435,9 @@
#define E1000_RXPBS_CFG_TS_EN 0x80000000 /* Timestamp in Rx buffer */
#define E1000_RXPBS_SIZE_I210_MASK 0x0000003F /* Rx packet buffer size */
#define E1000_TXPB0S_SIZE_I210_MASK 0x0000003F /* Tx packet buffer 0 size */
+#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */
+#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */
+
#define E1000_DOBFFCTL_OBFFTHR_MASK 0x000000FF /* OBFF threshold */
#define E1000_DOBFFCTL_EXIT_ACT_MASK 0x01000000 /* Exit active CB */
@@ -1455,5 +1464,7 @@
#define E1000_STATUS_LAN_ID_OFFSET 2
#define E1000_VFTA_ENTRIES 128
#define E1000_UNUSEDARG
+#ifndef ERROR_REPORT
#define ERROR_REPORT(fmt) do { } while (0)
+#endif /* ERROR_REPORT */
#endif /* _E1000_DEFINES_H_ */
Modified: head/sys/dev/e1000/e1000_hw.h
==============================================================================
--- head/sys/dev/e1000/e1000_hw.h Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_hw.h Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -133,6 +133,10 @@ struct e1000_hw;
#define E1000_DEV_ID_PCH_LPT_I217_V 0x153B
#define E1000_DEV_ID_PCH_LPTLP_I218_LM 0x155A
#define E1000_DEV_ID_PCH_LPTLP_I218_V 0x1559
+#define E1000_DEV_ID_PCH_I218_LM2 0x15A0
+#define E1000_DEV_ID_PCH_I218_V2 0x15A1
+#define E1000_DEV_ID_PCH_I218_LM3 0x15A2 /* Wildcat Point PCH */
+#define E1000_DEV_ID_PCH_I218_V3 0x15A3 /* Wildcat Point PCH */
#define E1000_DEV_ID_82576 0x10C9
#define E1000_DEV_ID_82576_FIBER 0x10E6
#define E1000_DEV_ID_82576_SERDES 0x10E7
@@ -696,7 +700,7 @@ struct e1000_mac_operations {
s32 (*setup_led)(struct e1000_hw *);
void (*write_vfta)(struct e1000_hw *, u32, u32);
void (*config_collision_dist)(struct e1000_hw *);
- void (*rar_set)(struct e1000_hw *, u8*, u32);
+ int (*rar_set)(struct e1000_hw *, u8*, u32);
s32 (*read_mac_addr)(struct e1000_hw *);
s32 (*validate_mdi_setting)(struct e1000_hw *);
s32 (*set_obff_timer)(struct e1000_hw *, u32);
@@ -934,6 +938,13 @@ struct e1000_shadow_ram {
#define E1000_SHADOW_RAM_WORDS 2048
+/* I218 PHY Ultra Low Power (ULP) states */
+enum e1000_ulp_state {
+ e1000_ulp_state_unknown,
+ e1000_ulp_state_off,
+ e1000_ulp_state_on,
+};
+
struct e1000_dev_spec_ich8lan {
bool kmrn_lock_loss_workaround_enabled;
struct e1000_shadow_ram shadow_ram[E1000_SHADOW_RAM_WORDS];
@@ -942,6 +953,7 @@ struct e1000_dev_spec_ich8lan {
bool nvm_k1_enabled;
bool eee_disable;
u16 eee_lp_ability;
+ enum e1000_ulp_state ulp_state;
};
struct e1000_dev_spec_82575 {
Modified: head/sys/dev/e1000/e1000_i210.c
==============================================================================
--- head/sys/dev/e1000/e1000_i210.c Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_i210.c Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -536,7 +536,7 @@ s32 e1000_validate_nvm_checksum_i210(str
**/
s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
u16 checksum = 0;
u16 i, nvm_data;
@@ -615,7 +615,7 @@ bool e1000_get_flash_presence_i210(struc
**/
s32 e1000_update_flash_i210(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
u32 flup;
DEBUGFUNC("e1000_update_flash_i210");
@@ -671,7 +671,7 @@ s32 e1000_pool_flash_update_done_i210(st
**/
static s32 e1000_init_nvm_params_i210(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
struct e1000_nvm_info *nvm = &hw->nvm;
DEBUGFUNC("e1000_init_nvm_params_i210");
@@ -756,7 +756,7 @@ out:
static s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address,
u8 dev_addr, u16 *data, bool read)
{
- s32 ret_val = E1000_SUCCESS;
+ s32 ret_val;
DEBUGFUNC("__e1000_access_xmdio_reg");
@@ -815,3 +815,90 @@ s32 e1000_write_xmdio_reg(struct e1000_h
return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, FALSE);
}
+
+/**
+ * e1000_pll_workaround_i210
+ * @hw: pointer to the HW structure
+ *
+ * Works around an errata in the PLL circuit where it occasionally
+ * provides the wrong clock frequency after power up.
+ **/
+static s32 e1000_pll_workaround_i210(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
+ u16 nvm_word, phy_word, pci_word, tmp_nvm;
+ int i;
+
+ /* Get and set needed register values */
+ wuc = E1000_READ_REG(hw, E1000_WUC);
+ mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG);
+ reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO;
+ E1000_WRITE_REG(hw, E1000_MDICNFG, reg_val);
+
+ /* Get data from NVM, or set default */
+ ret_val = e1000_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD,
+ &nvm_word);
+ if (ret_val != E1000_SUCCESS)
+ nvm_word = E1000_INVM_DEFAULT_AL;
+ tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
+ /* check current state directly from internal PHY */
+ e1000_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
+ E1000_PHY_PLL_FREQ_REG), &phy_word);
+ if ((phy_word & E1000_PHY_PLL_UNCONF)
+ != E1000_PHY_PLL_UNCONF) {
+ ret_val = E1000_SUCCESS;
+ break;
+ } else {
+ ret_val = -E1000_ERR_PHY;
+ }
+ /* directly reset the internal PHY */
+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
+ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
+ ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
+
+ E1000_WRITE_REG(hw, E1000_WUC, 0);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
+ E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val);
+
+ e1000_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ pci_word |= E1000_PCI_PMCSR_D3;
+ e1000_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ msec_delay(1);
+ pci_word &= ~E1000_PCI_PMCSR_D3;
+ e1000_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
+ E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val);
+
+ /* restore WUC register */
+ E1000_WRITE_REG(hw, E1000_WUC, wuc);
+ }
+ /* restore MDICNFG setting */
+ E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg);
+ return ret_val;
+}
+
+/**
+ * e1000_init_hw_i210 - Init hw for I210/I211
+ * @hw: pointer to the HW structure
+ *
+ * Called to initialize hw for i210 hw family.
+ **/
+s32 e1000_init_hw_i210(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_init_hw_i210");
+ if ((hw->mac.type >= e1000_i210) &&
+ !(e1000_get_flash_presence_i210(hw))) {
+ ret_val = e1000_pll_workaround_i210(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+ }
+ ret_val = e1000_init_hw_82575(hw);
+ return ret_val;
+}
Modified: head/sys/dev/e1000/e1000_i210.h
==============================================================================
--- head/sys/dev/e1000/e1000_i210.h Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_i210.h Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -49,6 +49,7 @@ s32 e1000_read_xmdio_reg(struct e1000_hw
u16 *data);
s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr,
u16 data);
+s32 e1000_init_hw_i210(struct e1000_hw *hw);
#define E1000_STM_OPCODE 0xDB00
#define E1000_EEPROM_FLASH_SIZE_WORD 0x11
@@ -93,4 +94,16 @@ enum E1000_INVM_STRUCTURE_TYPE {
#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1
#define NVM_LED_1_CFG_DEFAULT_I211 0x0184
#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C
+
+/* PLL Defines */
+#define E1000_PCI_PMCSR 0x44
+#define E1000_PCI_PMCSR_D3 0x03
+#define E1000_MAX_PLL_TRIES 5
+#define E1000_PHY_PLL_UNCONF 0xFF
+#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000
+#define E1000_PHY_PLL_FREQ_REG 0x000E
+#define E1000_INVM_DEFAULT_AL 0x202F
+#define E1000_INVM_AUTOLOAD 0x0A
+#define E1000_INVM_PLL_WO_VAL 0x0010
+
#endif
Modified: head/sys/dev/e1000/e1000_ich8lan.c
==============================================================================
--- head/sys/dev/e1000/e1000_ich8lan.c Thu Jun 26 20:12:38 2014
(r267934)
+++ head/sys/dev/e1000/e1000_ich8lan.c Thu Jun 26 21:33:32 2014
(r267935)
@@ -1,6 +1,6 @@
/******************************************************************************
- Copyright (c) 2001-2013, Intel Corporation
+ Copyright (c) 2001-2014, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -63,6 +63,10 @@
* Ethernet Connection I217-V
* Ethernet Connection I218-V
* Ethernet Connection I218-LM
+ * Ethernet Connection (2) I218-LM
+ * Ethernet Connection (2) I218-V
+ * Ethernet Connection (3) I218-LM
+ * Ethernet Connection (3) I218-V
*/
#include "e1000_api.h"
@@ -73,8 +77,8 @@ static s32 e1000_acquire_nvm_ich8lan(st
static void e1000_release_nvm_ich8lan(struct e1000_hw *hw);
static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
-static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
-static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
+static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
+static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw);
static void e1000_update_mc_addr_list_pch2lan(struct e1000_hw *hw,
u8 *mc_addr_list,
@@ -250,7 +254,7 @@ out:
* Toggling the LANPHYPC pin value fully power-cycles the PHY and is
* used to reset the PHY to a quiescent state when necessary.
**/
-void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
+static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
{
u32 mac_reg;
@@ -306,6 +310,12 @@ static s32 e1000_init_phy_workarounds_pc
*/
e1000_gate_hw_phy_config_ich8lan(hw, TRUE);
+ /* It is not possible to be certain of the current state of ULP
+ * so forcibly disable it.
+ */
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
+ e1000_disable_ulp_lpt_lp(hw, TRUE);
+
ret_val = hw->phy.ops.acquire(hw);
if (ret_val) {
DEBUGOUT("Failed to initialize PHY flow\n");
@@ -611,13 +621,12 @@ static s32 e1000_init_nvm_params_ich8lan
DEBUGFUNC("e1000_init_nvm_params_ich8lan");
/* Can't read flash registers if the register set isn't mapped. */
+ nvm->type = e1000_nvm_flash_sw;
if (!hw->flash_address) {
DEBUGOUT("ERROR: Flash registers not mapped\n");
return -E1000_ERR_CONFIG;
}
- nvm->type = e1000_nvm_flash_sw;
-
gfpreg = E1000_READ_FLASH_REG(hw, ICH_FLASH_GFPREG);
/* sector_X_addr is a "sector"-aligned address (4096 bytes)
@@ -672,6 +681,9 @@ static s32 e1000_init_nvm_params_ich8lan
static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
+#if defined(QV_RELEASE) || !defined(NO_PCH_LPT_B0_SUPPORT)
+ u16 pci_cfg;
+#endif /* QV_RELEASE || !defined(NO_PCH_LPT_B0_SUPPORT) */
DEBUGFUNC("e1000_init_mac_params_ich8lan");
@@ -744,6 +756,11 @@ static s32 e1000_init_mac_params_ich8lan
mac->ops.update_mc_addr_list =
e1000_update_mc_addr_list_pch2lan;
case e1000_pchlan:
+#if defined(QV_RELEASE) || !defined(NO_PCH_LPT_B0_SUPPORT)
+ /* save PCH revision_id */
+ e1000_read_pci_cfg(hw, E1000_PCI_REVISION_ID_REG, &pci_cfg);
+ hw->revision_id = (u8)(pci_cfg &= 0x000F);
+#endif /* QV_RELEASE || !defined(NO_PCH_LPT_B0_SUPPORT) */
/* check management mode */
mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
/* ID LED init */
@@ -915,6 +932,17 @@ s32 e1000_set_eee_pchlan(struct e1000_hw
}
}
+ if (hw->phy.type == e1000_phy_82579) {
+ ret_val = e1000_read_emi_reg_locked(hw, I82579_LPI_PLL_SHUT,
+ &data);
+ if (ret_val)
+ goto release;
+
+ data &= ~I82579_LPI_100_PLL_SHUT;
+ ret_val = e1000_write_emi_reg_locked(hw, I82579_LPI_PLL_SHUT,
+ data);
+ }
+
/* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
if (ret_val)
@@ -1179,6 +1207,256 @@ static s32 e1000_set_obff_timer_pch_lpt(
}
/**
+ * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP
+ * @hw: pointer to the HW structure
+ * @to_sx: boolean indicating a system power state transition to Sx
+ *
+ * When link is down, configure ULP mode to significantly reduce the power
+ * to the PHY. If on a Manageability Engine (ME) enabled system, tell the
+ * ME firmware to start the ULP configuration. If not on an ME enabled
+ * system, configure the ULP mode by software.
+ */
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
+{
+ u32 mac_reg;
+ s32 ret_val = E1000_SUCCESS;
+ u16 phy_reg;
+
+ if ((hw->mac.type < e1000_pch_lpt) ||
+ (hw->device_id == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+ (hw->device_id == E1000_DEV_ID_PCH_LPT_I217_V) ||
+ (hw->device_id == E1000_DEV_ID_PCH_I218_LM2) ||
+ (hw->device_id == E1000_DEV_ID_PCH_I218_V2) ||
+ (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on))
+ return 0;
+
+ if (E1000_READ_REG(hw, E1000_FWSM) & E1000_ICH_FWSM_FW_VALID) {
+ /* Request ME configure ULP mode in the PHY */
+ mac_reg = E1000_READ_REG(hw, E1000_H2ME);
+ mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS;
+ E1000_WRITE_REG(hw, E1000_H2ME, mac_reg);
+
+ goto out;
+ }
+
+ if (!to_sx) {
+ int i = 0;
+
+ /* Poll up to 5 seconds for Cable Disconnected indication */
+ while (!(E1000_READ_REG(hw, E1000_FEXT) &
+ E1000_FEXT_PHY_CABLE_DISCONNECTED)) {
+ /* Bail if link is re-acquired */
+ if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)
+ return -E1000_ERR_PHY;
+
+ if (i++ == 100)
+ break;
+
+ msec_delay(50);
+ }
+ DEBUGOUT2("CABLE_DISCONNECTED %s set after %dmsec\n",
+ (E1000_READ_REG(hw, E1000_FEXT) &
+ E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not",
+ i * 50);
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ /* Force SMBus mode in PHY */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+ /* Force SMBus mode in MAC */
+ mac_reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
+ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+ E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg);
+
+ /* Set Inband ULP Exit, Reset to SMBus mode and
+ * Disable SMBus Release on PERST# in PHY
+ */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS |
+ I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+ if (to_sx) {
+ if (E1000_READ_REG(hw, E1000_WUFC) & E1000_WUFC_LNKC)
+ phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
+
+ phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
+ } else {
+ phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
+ }
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ /* Set Disable SMBus Release on PERST# in MAC */
+ mac_reg = E1000_READ_REG(hw, E1000_FEXTNVM7);
+ mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST;
+ E1000_WRITE_REG(hw, E1000_FEXTNVM7, mac_reg);
+
+ /* Commit ULP changes in PHY by starting auto ULP configuration */
+ phy_reg |= I218_ULP_CONFIG1_START;
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+release:
+ hw->phy.ops.release(hw);
+out:
+ if (ret_val)
+ DEBUGOUT1("Error in ULP enable flow: %d\n", ret_val);
+ else
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on;
+
+ return ret_val;
+}
+
+/**
+ * e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for
LynxPoint-LP
+ * @hw: pointer to the HW structure
+ * @force: boolean indicating whether or not to force disabling ULP
+ *
+ * Un-configure ULP mode when link is up, the system is transitioned from
+ * Sx or the driver is unloaded. If on a Manageability Engine (ME) enabled
+ * system, poll for an indication from ME that ULP has been un-configured.
+ * If not on an ME enabled system, un-configure the ULP mode by software.
+ *
+ * During nominal operation, this function is called when link is acquired
+ * to disable ULP mode (force=FALSE); otherwise, for example when unloading
+ * the driver or during Sx->S0 transitions, this is called with force=TRUE
+ * to forcibly disable ULP.
+ */
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "[email protected]"
