Author: adrian
Date: Fri Sep 18 07:55:33 2015
New Revision: 287954
URL: https://svnweb.freebsd.org/changeset/base/287954

Log:
  Add in a temporary (hah!) workaround for net80211 scanning versus NIC
  requirements.
  
  Don't start the opmode and join path until a pending survey is finished.
  This seems to reliably fix things.
  
  Ideally I'd just finish off the net80211 pluggable scan stuff and implement
  the methods here so if_rsu can just drive the scan machinery.
  However, that's a .. later thing.
  
  Whilst here, remove the getbuf debugging; it's okay to run out of transmit
  buffers under load; it however isn't okay to not be able to send commands.
  I'll fix that later.

Modified:
  head/sys/dev/usb/wlan/if_rsu.c
  head/sys/dev/usb/wlan/if_rsureg.h

Modified: head/sys/dev/usb/wlan/if_rsu.c
==============================================================================
--- head/sys/dev/usb/wlan/if_rsu.c      Fri Sep 18 07:26:34 2015        
(r287953)
+++ head/sys/dev/usb/wlan/if_rsu.c      Fri Sep 18 07:55:33 2015        
(r287954)
@@ -742,9 +742,7 @@ _rsu_getbuf(struct rsu_softc *sc)
                STAILQ_REMOVE_HEAD(&sc->sc_tx_inactive, next);
        else
                bf = NULL;
-       if (bf == NULL)
-               DPRINTF("out of xmit buffers\n");
-        return (bf);
+       return (bf);
 }
 
 static struct rsu_data *
@@ -755,8 +753,6 @@ rsu_getbuf(struct rsu_softc *sc)
        RSU_ASSERT_LOCKED(sc);
 
        bf = _rsu_getbuf(sc);
-       if (bf == NULL)
-               DPRINTF("stop queue\n");
        return (bf);
 }
 
@@ -947,6 +943,8 @@ rsu_fw_cmd(struct rsu_softc *sc, uint8_t
        int cmdsz;
        int xferlen;
 
+       RSU_ASSERT_LOCKED(sc);
+
        data = rsu_getbuf(sc);
        if (data == NULL)
                return (ENOMEM);
@@ -1124,6 +1122,9 @@ rsu_site_survey(struct rsu_softc *sc, st
 {
        struct r92s_fw_cmd_sitesurvey cmd;
        struct ieee80211com *ic = &sc->sc_ic;
+       int r;
+
+       RSU_ASSERT_LOCKED(sc);
 
        memset(&cmd, 0, sizeof(cmd));
        if ((ic->ic_flags & IEEE80211_F_ASCAN) || sc->sc_scan_pass == 1)
@@ -1137,7 +1138,11 @@ rsu_site_survey(struct rsu_softc *sc, st
 
        }
        DPRINTF("sending site survey command, pass=%d\n", sc->sc_scan_pass);
-       return (rsu_fw_cmd(sc, R92S_CMD_SITE_SURVEY, &cmd, sizeof(cmd)));
+       r = rsu_fw_cmd(sc, R92S_CMD_SITE_SURVEY, &cmd, sizeof(cmd));
+       if (r == 0) {
+               sc->sc_scanning = 1;
+       }
+       return (r);
 }
 
 static int
@@ -1152,6 +1157,27 @@ rsu_join_bss(struct rsu_softc *sc, struc
        uint8_t *frm;
        uint8_t opmode;
        int error;
+       int cnt;
+       char *msg = "rsujoin";
+
+       RSU_ASSERT_LOCKED(sc);
+
+       /*
+        * Until net80211 scanning doesn't automatically finish
+        * before we tell it to, let's just wait until any pending
+        * scan is done.
+        *
+        * XXX TODO: yes, this releases and re-acquires the lock.
+        * We should re-verify the state whenever we re-attempt this!
+        */
+       cnt = 0;
+       while (sc->sc_scanning && cnt < 10) {
+               device_printf(sc->sc_dev,
+                   "%s: still scanning! (attempt %d)\n",
+                   __func__, cnt);
+               msleep(msg, &sc->sc_mtx, 0, msg, hz / 2);
+               cnt++;
+       }
 
        /* Let the FW decide the opmode based on the capinfo field. */
        opmode = NDIS802_11AUTOUNKNOWN;
@@ -1309,12 +1335,18 @@ rsu_event_join_bss(struct rsu_softc *sc,
        RSU_DPRINTF(sc, RSU_DEBUG_STATE | RSU_DEBUG_FWCMD,
            "%s: Rx join BSS event len=%d res=%d\n",
            __func__, len, res);
+
+       /*
+        * XXX Don't do this; there's likely a better way to tell
+        * the caller we failed.
+        */
        if (res <= 0) {
                RSU_UNLOCK(sc);
                ieee80211_new_state(vap, IEEE80211_S_SCAN, -1);
                RSU_LOCK(sc);
                return;
        }
+
        tmp = le32toh(rsp->associd);
        if (tmp >= vap->iv_max_aid) {
                DPRINTF("Assoc ID overflow\n");
@@ -1376,8 +1408,14 @@ rsu_rx_event(struct rsu_softc *sc, uint8
                RSU_DPRINTF(sc, RSU_DEBUG_SCAN,
                    "%s: site survey pass %d done, found %d BSS\n",
                    __func__, sc->sc_scan_pass, le32toh(*(uint32_t *)buf));
+               sc->sc_scanning = 0;
                if (vap->iv_state != IEEE80211_S_SCAN)
                        break;  /* Ignore if not scanning. */
+
+               /*
+                * XXX TODO: This needs to be done without a transition to
+                * the SCAN state again.  Grr.
+                */
                if (sc->sc_scan_pass == 0 && vap->iv_des_nssid != 0) {
                        /* Schedule a directed scan for hidden APs. */
                        /* XXX bad! */
@@ -2594,6 +2632,7 @@ rsu_init(struct rsu_softc *sc)
 
        /* We're ready to go. */
        sc->sc_running = 1;
+       sc->sc_scanning = 0;
        return;
 fail:
        /* Need to stop all failed transfers, if any */

Modified: head/sys/dev/usb/wlan/if_rsureg.h
==============================================================================
--- head/sys/dev/usb/wlan/if_rsureg.h   Fri Sep 18 07:26:34 2015        
(r287953)
+++ head/sys/dev/usb/wlan/if_rsureg.h   Fri Sep 18 07:55:33 2015        
(r287954)
@@ -747,6 +747,7 @@ struct rsu_softc {
 
        u_int                           sc_running:1,
                                        sc_calibrating:1,
+                                       sc_scanning:1,
                                        sc_scan_pass:1;
        u_int                           cut;
        struct rsu_host_cmd_ring        cmdq;
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "[email protected]"

Reply via email to