Author: adrian
Date: Sun Jul 23 07:10:41 2017
New Revision: 321380
URL: https://svnweb.freebsd.org/changeset/base/321380
Log:
[ar933x] make carambola2 work again!
* Add in the hints needed for AR933x ath(4) support - this is the nicer way
that allows ath to be a module;
* ATH_EEPROM_FIRMWARE is also required for all AR933x chipsets.
Tested:
* Carambola2, AR933x
Modified:
head/sys/mips/conf/CARAMBOLA2.hints
head/sys/mips/conf/std.AR933X
Modified: head/sys/mips/conf/CARAMBOLA2.hints
==============================================================================
--- head/sys/mips/conf/CARAMBOLA2.hints Sun Jul 23 07:02:10 2017
(r321379)
+++ head/sys/mips/conf/CARAMBOLA2.hints Sun Jul 23 07:10:41 2017
(r321380)
@@ -31,10 +31,16 @@ hint.arge.1.media=1000
hint.arge.1.fduplex=1
hint.arge.1.eeprommac=0x1fff0006
-# Where the ART is - last 64k in the flash
-# 0x9fff1000 ?
-hint.ath.0.eepromaddr=0x1fff0000
-hint.ath.0.eepromsize=16384
+
+# ART calibration data mapping
+hint.ar71xx_caldata.0.at="nexus0"
+hint.ar71xx_caldata.0.order=0
+# Where the ART is - last 64k in the first 8MB of flash
+hint.ar71xx_caldata.0.map.0.ath_fixup_addr=0x1fff0000
+hint.ar71xx_caldata.0.map.0.ath_fixup_size=16384
+
+# And now tell the ath(4) driver where to look!
+hint.ath.0.eeprom_firmware="ar71xx_caldata.0.map.0.eeprom_firmware"
# The AP121 16MB flash layout:
#
Modified: head/sys/mips/conf/std.AR933X
==============================================================================
--- head/sys/mips/conf/std.AR933X Sun Jul 23 07:02:10 2017
(r321379)
+++ head/sys/mips/conf/std.AR933X Sun Jul 23 07:10:41 2017
(r321380)
@@ -57,7 +57,10 @@ include "std.AR_MIPS_BASE"
makeoptions MODULES_OVERRIDE+="hwpmc_mips24k"
+# AR9330 support - everything shipping uses EEPROM for calibration data,
+# so always include this.
option AH_SUPPORT_AR9330 # Chipset support
+option ATH_EEPROM_FIRMWARE # Use EEPROM from flash
device usb
device ehci
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "[email protected]"
