"whack: For --trafficstatus display the "lease" IPv4 address" lease would be nicer before the id instead of at the end. with x509 id could be very long. e.g.
-006 #2: "road-east-x509-ipv4"[1] 192.1.2.23, type=ESP, add_time=1234567890, inBytes=336, outBytes=336, id='C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, [email protected]', lease=192.0.2.100/32 If it is before this would look like: 006 #2: "road-east-x509-ipv4"[1] 192.1.2.23, type=ESP, add_time=1234567890, inBytes=336, outBytes=336, lease=192.0.2.100/32 id='C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, [email protected]' Also lease IP address seems to appear twice in some cases? I think with NAT it is already there. trafficstatus line is getting confusing. newoe-25-cat-1/road.console.txt also why is it twice with id null? 006 #2: "private-or-clear#192.1.2.0/24"[1] 10.0.10.1/32=== ...192.1.2.23, type=ESP, add_time=1234567890, inBytes=252, outBytes=252, id='ID_NULL', lease=10.0.10.1/32 -antony _______________________________________________ Swan-dev mailing list [email protected] https://lists.libreswan.org/mailman/listinfo/swan-dev
