When I ran the test suite last night, I found three failures that look like obsolete reference logs. And one failure of the sanitizers.
Could whoever is responsible fix the reference logs and the sanitizer? Note: I was not looking at all test failures. There are likely other places these problems show up. > testing/pluto/addconn-02 failed east:output-different testing/pluto/addconn-02/OUTPUT/east.console.diff bad reference file +conn: "test" redirect-to=<unset> +conn: "test" accept-redirect-to=<unset> > testing/pluto/impair-08-ikev2-key-length-attribute failed > west:output-different testing/pluto/impair-08-ikev2-key-length-attribute/OUTPUT/west.console.diff bad reference file -002 "aes128" #5: AUTH response contained the error notification NO_PROPOSAL_CHOSEN +002 "aes128" #5: IKE_AUTH response contained the error notification NO_PROPOSAL_CHOSEN -002 "aes128" #12: AUTH response contained the error notification NO_PROPOSAL_CHOSEN +002 "aes128" #12: IKE_AUTH response contained the error notification NO_PROPOSAL_CHOSEN > testing/pluto/ikev2-redirect-01-global failed east:output-different testing/pluto/ikev2-redirect-01-global/OUTPUT/east.console.diff bad reference logs -000 global-redirect=on, global-redirect-to=192.1.3.33 +000 global-redirect=yes, global-redirect-to=192.1.3.33 > testing/pluto/ikev2-redirect-06-roadwarriors failed east:output-different > north:output-different road:output-different west:output-different testing/pluto/ikev2-redirect-06-roadwarriors/OUTPUT/east.console.diff bad sanitization - proto esp spi 0xSPISPI reqid REQID mode tunnel + proto esp spi 0x3232f2a3 reqid 16393 mode tunnel - aead rfc4106(gcm(aes)) 0xENCAUTHKEY 128 + aead rfc4106(gcm(aes)) 0x90982f7c8ecd04b8706fd7c52127f4d024156158ddbc056983e8af3a2c55145e540ac637 128 - proto esp spi 0xSPISPI reqid REQID mode tunnel + proto esp spi 0x8c894e26 reqid 16393 mode tunnel _______________________________________________ Swan-dev mailing list [email protected] https://lists.libreswan.org/mailman/listinfo/swan-dev
