On Fri, 4 Sep 2020, Antony Antony wrote:
https://testing.libreswan.org/v3.30-1548-g6ff4d70e27-main/ikev2-xfrmi-01/
showing up as pass. So I am not following the issue.
Lets discuss this further on swan-dev!
That is an ikev2 test case, not an ikev1 test case.
kvmplutotest ikev1-xfrmi-01 good
kvmplutotest ikev1-xfrmi-02 wip
kvmplutotest ikev1-xfrmi-02-aggr wip
kvmplutotest ikev1-xfrmi-04 good
kvmplutotest ikev1-xfrmi-04-aggr good
kvmplutotest ikev1-xfrmi-05-remote-access-client good
For ikev1-xfrmi-02 and ikev1-xfrmi-02-aggr we see:
4 packets transmitted, 4 received, 0% packet loss, time XXXX
ip -s link show ipsec1
X: ipsec1@eth0: <NOARP,UP,LOWER_UP> mtu 1500 state UNKNOWN
RX: bytes packets errors dropped overrun mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
440 5 0 0 0 0
006 #2: "road", type=ESP, add_time=1234567890, inBytes=0, outBytes=440,
id='@east'
So it looks like something weird is happening on the incoming byte stream? Like
arriving in the clear?
Paul
_______________________________________________
Swan-dev mailing list
[email protected]
https://lists.libreswan.org/mailman/listinfo/swan-dev
