On Wed, 15 Jun 2016, Daniel J Blueman wrote:
I find IKEv2 connections from a clean Windows 10 install to libreswan
[1] git HEAD fail after just under an hour [2]. I left the client
pinging an internal IP address on the server to avoid the connection
being detected as idle.
Before I capture debug logs with --debug-all, any configuration changes to try?
not that I can see.
Jun 13 22:29:19: "remote"[2] 192.168.10.240 #2: STATE_PARENT_R2:
received v2I2, PARENT SA established tunnel mode {ESP/NAT=>0xadeaf89e
<0x46908922 xfrm=AES_256-HMAC_SHA1 NATOA=none NATD=192.168.10.240:4500
DPD=active}
Jun 13 23:25:05: | ikev2_child_sa_respond returned STF_FAIL with
v2N_NO_PROPOSAL_CHOSEN
There seems to be a lot of logs, including non-debug logs, missing here.
We'd need to see those to see what's going wrong.
Paul
_______________________________________________
Swan mailing list
[email protected]
https://lists.libreswan.org/mailman/listinfo/swan
