is not set, i check by doing:
# sysctl -a | grep proxy_arp
net.ipv4.conf.all.proxy_arp = 0
net.ipv4.conf.all.proxy_arp_pvlan = 0
net.ipv4.conf.br0.proxy_arp = 0
net.ipv4.conf.br0.proxy_arp_pvlan = 0
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.proxy_arp_pvlan = 0
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.proxy_arp_pvlan = 0
net.ipv4.conf.eth1.proxy_arp = 0
net.ipv4.conf.eth1.proxy_arp_pvlan = 0
net.ipv4.conf.eth2.proxy_arp = 0
net.ipv4.conf.eth2.proxy_arp_pvlan = 0
net.ipv4.conf.eth2/24.proxy_arp = 0
net.ipv4.conf.eth2/24.proxy_arp_pvlan = 0
net.ipv4.conf.imq0.proxy_arp = 0
net.ipv4.conf.imq0.proxy_arp_pvlan = 0
net.ipv4.conf.imq1.proxy_arp = 0
net.ipv4.conf.imq1.proxy_arp_pvlan = 0
net.ipv4.conf.ip_vti0.proxy_arp = 0
net.ipv4.conf.ip_vti0.proxy_arp_pvlan = 0
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.proxy_arp_pvlan = 0
My lan ip is set on br0 and the br0 only have eth0.
On 04/19/2017 10:15 PM, Tuomo Soini wrote:
On Wed, 19 Apr 2017 21:18:06 +0200
Antonio Silva <[email protected]> wrote:
it's working for me with leftsourceip=192.168.10.1 (server
lan/gateway ip) and pool 192.168.10.206-210.
The proxy_arp is set to 0 on all interfaces.
I suggest you check setting when you have tunnel up.
When set the tunnel without leftsourceip is when i don't have traffic
to lan.
Now i do see the arp replies:
21:16:05.120182 ARP, Request who-has 192.168.10.207 tell
192.168.10.25, length 46
21:16:05.904139 ARP, Reply 192.168.10.207 is-at f8:b1:56:b7:7f:d8,
length 28
The mac is from the lan device.
We have some automation in _updown to enable proxy arp when it's
needed.
_______________________________________________
Swan mailing list
[email protected]
https://lists.libreswan.org/mailman/listinfo/swan
