Hi List,
I have an issue with a Libreswan instance where It appears to be port selective
over what traffic goes across the VPN.
authby= secret
auto= start
type= tunnel
nat_traversal= yes
forceencaps= no
rekeymargin= 3m
keyingtries= %forever
keylife= 1h
ikelifetime= 24h
ikev2= insist
left= 1.1.1.1
leftsubnet= 192.168.70.1/32
leftid= 1.1.1.1
right= 2.2.2.2
rightid= 2.2.2.2
rightsubnet= 10.190.22.0/24
#Phase 1
ike= aes256-sha2_256;modp2048
#Phase 2
phase2= esp
phase2alg= aes256-sha2_256;modp2048
#Other Encryption Settings
pfs= yes
sha2_truncbug= no
#Dead Peer Detection
dpdaction= restart
Port 5000,5001,5002 will go across the VPN fine (Source from Right Side)
But port 9001 (Source from Left Side) is not captured into the VPN and as a
result attempts to go out to the internet and fails.
Communication on port 5001/5002/5000 is successful.
Does anyone have any ideas of what could be causing this issue?
Thanks
Joe.
_______________________________________________
Swan mailing list
[email protected]
https://lists.libreswan.org/mailman/listinfo/swan
