got it.
Tried lots and lots of things, so not sure exactly what combination, but
the last two steps were to reimport the certificates under the system
chain instead of the login chain on the mac, and then put rightid=%myid
to the conn...
On 2017-10-19 03:06 PM, Computerisms Corporation wrote:
Wondering if anyone has ikev2 working with mac os 10.11? I do have an
ikev2 conn working for windows, looking for the magic incantation to get
them both working together...
I found one post by jpastuszek from a year and a half ago, apparently
with version 3.13. I have tried everything suggested there and just
about every combination of settings that make sense to me, and the best
I get is a single message:
STATE_PARENT_R1: received v2I1, sent v2R1 {auth=IKEv2 cipher=aes_256
integ=sha256_128 prf=sha2_256 group=MODP2048}
I have had some errors about invalid syntax:
returned STF_FAIL with v2N_INVALID_SYNTAX
But when I seem to have those fixed, I end up back at the original error.
I am sifting through the debug logs now, but so far not finding any
problems. Thinking that while I am looking maybe someone has already
figured out the secret, so wouldn't hurt to ask...
_______________________________________________
Swan mailing list
[email protected]
https://lists.libreswan.org/mailman/listinfo/swan
