Hi Paul,
Thanks for the quick response. I am a newb to gdb, but here is the result:
(gdb) bt
#0 __pthread_self () at pthread_self.c:25
#1 0x00445880 in add_state_prefix (buf=0x7e800168) at
/home/pi/libreswan-3.22/programs/pluto/log.c:151
#2 0x004b8744 in lsw_passert_fail (file=0x50f40c "lswlog.c",
line=line@entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:29
#3 0x004b8fb8 in dest (log=0x7e800168) at
/home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#4 0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#5 0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c",
line=line@entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#6 0x004b8fb8 in dest (log=0x7e8005d0) at
/home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#7 0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#8 0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c",
line=line@entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#9 0x004b8fb8 in dest (log=0x7e800a38) at
/home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#10 0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#11 0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c",
line=line@entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#12 0x004b8fb8 in dest (log=0x7e800ea0) at
/home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#13 0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#14 0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c",
line=line@entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#15 0x004b8fb8 in dest (log=0x7e801308) at
/home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
Does that help? Anything else I can do to provide more helpful info?
-----Original Message-----
From: Paul Wouters [mailto:[email protected]]
Sent: Wednesday, October 25, 2017 12:48 PM
To: Charles Van Dusen <[email protected]>
Cc: [email protected]
Subject: Re: [Swan] Pluto not running?
On Wed, 25 Oct 2017, Charles Van Dusen wrote:
> I have another new install on a raspberry pi (Raspbian stretch). With Version
> 3.22 I am unable to start ipsec:
> Process: 3407 ExecStart=/usr/local/libexec/ipsec/pluto --leak-detective
> --config /etc/ipsec.conf --nofork (code=killed,
> signal=SEGV)
Looks like we crashed. Do you have gdb there, then you can run:
ipsec _stackmanager start
gdb /usr/libexec/ipsec/pluto
run --config /etc/ipsec.conf --nofork --stderrlog
and after it crashes:
bt
Paul
_______________________________________________
Swan mailing list
[email protected]
https://lists.libreswan.org/mailman/listinfo/swan
