On Thu, 26 Oct 2017, Priyank Kumar wrote:
Since this was my first post, I should be posting more details, but finally I
got it working after posting on the
mailing list
I'm glad you got it working
~# ipsec addconn myvpn
Note you should use: ipsec auto --add myvpn (which internally calls addconn)
002 added connection description "myvpn"
2) Restart the ipsec and xl2tp connection
I'm not sure why you are adding a connection to the daemon and then
restart the daemon? If you want the connection always loaded, add
auto=add
to your connection myvpn
4) Now we have to add adaptor using xl2tp for PPP to be up and you get an IP
echo "c myvpn" > /var/run/xl2tpd/l2tp-control
I guess we could make this part nicer, but people really shouldn't
install new L2TP/IPsec servers anymore and use IKEv2 or IKEv1-XAUTH
instead.
It would be a great help if wiki is update with both side config and how to
start the client side connection.
Agreed :P
We do create users with wiki edit rights to those who are willing to help :)
Where you mentioned about following, do we have a sample config on both which I
could test. I am doing on my
embedded ARM gateway with integrated MODEM.
* FULL MESH ENCRYPTION
* OPPORTUNISTIC IPSEC GATEWAY
You can find more information about those at:
https://libreswan.org/wiki/#Cloud_and_mesh_deployments
Paul
_______________________________________________
Swan mailing list
[email protected]
https://lists.libreswan.org/mailman/listinfo/swan
