Hi Team, Please help in below scenario:-
I have 3 machines :- machine A ( ip - 10.5.5.7, Client ), machine B(10.5.5.52, server ) and machine C(192.168.13.212 ). Ipsec sec tunnel established between machine A and machine B. when i ping from A to B , ipsec whack --trafficstatus in and out byte get increase. Now machine C is connected with machine B and there is a route so that i can ping machine C through machine A, But when i ping machine C from machine A , ping get started but ipsec whack --trafficstatus is not increasing. packets are going through tunnel. Expected result - I want when i ping machine C through machine A , ipsec traffic should get increase. Note - Ipsec tunnel is only between A and B , where A is client and B is server. Client ipsec.conf conn ikesa authby=rsasig left=10.5.5.5 #leftsourceip=10.5.5.5 leftsubnet=10.5.5.5/24 leftcert=10.5.5.5 # cert name leftid=%fromcert leftsendcert=always right=10.5.5.50 #rightsourceip=10.5.5.50 rightsubnet=10.5.5.50/24 rightid=%fromcert #decap-dscp=yes also=profile auto=start Server ipsec.conf conn profile authby=rsasig left=10.5.5.50 #leftsourceip=10.5.5.50 leftsubnet=10.5.5.50/24 leftcert=10.5.5.50 leftid=%fromcert leftsendcert=always #leftsubnet=192.168.15.0/24 #rightaddresspool=10.10.5.2-10.10.5.10 right=10.5.5.5 #rightsourceip=10.5.5.5 rightsubnet=10.5.5.5/24 rightid=%fromcert auto=start Please help me out. Thanks in advance, Regards, Mehboob Ansari
_______________________________________________ Swan mailing list [email protected] https://lists.libreswan.org/mailman/listinfo/swan
