Not yet in 4.9. But work to support this has recently started. Sent using a virtual keyboard on a phone
> On Oct 28, 2022, at 19:52, Nestor Melo <nestor.m...@zpesystems.com> wrote: > > > Hi, > > > We would like to configure a single IPSec connection that would handle both > IPv4 and IPv6 traffic. > > We considered multiple child SA sharing a single IKE SA: > > conn tunnel46 > auto=start > leftid=@left > left=%eth0 > rightid=@right > right=172.31.0.1 > authby=secret > ipsec-interface=yes > leftsourceip=192.168.61.1 > rightsourceip=192.168.60.1 > leftsubnets={192.168.61.0/24,fc02::/64} > rightsubnets={192.168.60.0/24,fc01::/64} > > However, when we tried that, only the IPv4 traffic came through. > > Paul mentioned in issue #375 > (https://github.com/libreswan/libreswan/issues/375) that: > > "For libreswan 4.2, we are working on allowing to combine these into one > conn, and also to combine them as traffic selectors on a single IPsec SA." > > Are mixed address families in {left|right}subnets something that is supported > in libreswan 4.9? If not, is there any alternative to achieve IPv4 and IPv6 > traffic through a single tunnel? > > > Thank you, > > Nestor Melo > _______________________________________________ > Swan mailing list > Swan@lists.libreswan.org > https://lists.libreswan.org/mailman/listinfo/swan
_______________________________________________ Swan mailing list Swan@lists.libreswan.org https://lists.libreswan.org/mailman/listinfo/swan