On Mar 15, 2017, at 3:40 PM, Itai Ferber via swift-evolution
<[email protected]> wrote:
Hi everyone,
The following introduces a new Swift-focused archival and
serialization API as part of the Foundation framework. We’re
interested in improving the experience and safety of performing
archival and serialization, and are happy to receive community
feedback on this work.
Because of the length of this proposal, the Appendix and Alternatives
Considered sections have been omitted here, but are available in the
full proposal on the swift-evolution repo. The full proposal also
includes an Unabridged API for further consideration.
Without further ado, inlined below.
— Itai
Swift Archival & Serialization
• Proposal: SE-NNNN
• Author(s): Itai Ferber, Michael LeHew, Tony Parker
• Review Manager: TBD
• Status: Awaiting review
• Associated PRs:
• #8124
• #8125
Introduction
Foundation's current archival and serialization APIs (NSCoding,
NSJSONSerialization, NSPropertyListSerialization, etc.), while
fitting for the dynamism of Objective-C, do not always map optimally
into Swift. This document lays out the design of an updated API that
improves the developer experience of performing archival and
serialization in Swift.
Specifically:
• It aims to provide a solution for the archival of Swift struct
and enum types
• It aims to provide a more type-safe solution for serializing to
external formats, such as JSON and plist
Motivation
The primary motivation for this proposal is the inclusion of native
Swift enum and struct types in archival and serialization. Currently,
developers targeting Swift cannot participate in NSCoding without
being willing to abandon enum and structtypes — NSCoding is an
@objc protocol, conformance to which excludes non-class types. This
is can be limiting in Swift because small enums and structs can be an
idiomatic approach to model representation; developers who wish to
perform archival have to either forgo the Swift niceties that
constructs like enumsprovide, or provide an additional compatibility
layer between their "real" types and their archivable types.
Secondarily, we would like to refine Foundation's existing
serialization APIs (NSJSONSerialization and
NSPropertyListSerialization) to better match Swift's strong type
safety. From experience, we find that the conversion from the
unstructured, untyped data of these formats into strongly-typed data
structures is a good fit for archival mechanisms, rather than taking
the less safe approach that 3rd-party JSON conversion approaches have
taken (described further in an appendix below).
We would like to offer a solution to these problems without
sacrificing ease of use or type safety.
Agenda
This proposal is the first stage of three that introduce different
facets of a whole Swift archival and serialization API:
• This proposal describes the basis for this API, focusing on the
protocols that users adopt and interface with
• The next stage will propose specific API for new encoders
• The final stage will discuss how this new API will interop with
NSCoding as it is today
SE-NNNN provides stages 2 and 3.
Proposed solution
We will be introducing the following new types:
• protocol Codable: Adopted by types to opt into archival.
Conformance may be automatically derived in cases where all
properties are also Codable.
• protocol CodingKey: Adopted by types used as keys for keyed
containers, replacing String keys with semantic types. Conformance
may be automatically derived in most cases.
• protocol Encoder: Adopted by types which can take Codable values
and encode them into a native format.
• class KeyedEncodingContainer<Key : CodingKey>: Subclasses of
this type provide a concrete way to store encoded values by
CodingKey. Types adopting Encoder should provide subclasses of
KeyedEncodingContainer to vend.
• protocol SingleValueEncodingContainer: Adopted by types which
provide a concrete way to store a single encoded value. Types
adopting Encoder should provide types conforming to
SingleValueEncodingContainer to vend (but in many cases will be able
to conform to it themselves).
• protocol Decoder: Adopted by types which can take payloads in a
native format and decode Codable values out of them.
• class KeyedDecodingContainer<Key : CodingKey>: Subclasses of
this type provide a concrete way to retrieve encoded values from
storage by CodingKey. Types adopting Decoder should provide
subclasses of KeyedDecodingContainer to vend.
• protocol SingleValueDecodingContainer: Adopted by types which
provide a concrete way to retrieve a single encoded value from
storage. Types adopting Decoder should provide types conforming to
SingleValueDecodingContainer to vend (but in many cases will be able
to conform to it themselves).
For end users of this API, adoption will primarily involve the
Codable and CodingKey protocols. In order to participate in this new
archival system, developers must add Codable conformance to their
types:
// If all properties are Codable, implementation is automatically
derived:
public struct Location : Codable {
public let latitude: Double
public let longitude: Double
}
public enum Animal : Int, Codable {
case chicken = 1
case
dog
case
turkey
case
cow
}
public struct Farm : Codable {
public let name: String
public let location: Location
public let animals: [Animal]
}
With developer participation, we will offer encoders and decoders
(described in SE-NNNN, not here) that take advantage of this
conformance to offer type-safe serialization of user models:
let farm = Farm(name: "Old MacDonald's Farm",
location
: Location(latitude: 51.621648, longitude: 0.269273),
animals
: [.chicken, .dog, .cow, .turkey, .dog, .chicken, .cow, .turkey,
.dog])
let payload: Data = try JSONEncoder().encode(farm)
do {
let farm = try JSONDecoder().decode(Farm.self, from: payload)
// Extracted as user types:
let coordinates = "\(farm.location.latitude,
farm.location.longitude)"
} catch {
// Encountered error during deserialization
}
This gives developers access to their data in a type-safe manner and
a recognizable interface.
Detailed design
To support user types, we expose the Codable protocol:
/// Conformance to `Codable` indicates that a type can marshal itself
into and out of an external representation.
public protocol Codable {
/// Initializes `self` by decoding from `decoder`.
///
/// - parameter decoder: The decoder to read data from.
/// - throws: An error if reading from the decoder fails, or if read
data is corrupted or otherwise invalid.
init(from decoder: Decoder) throws
/// Encodes `self` into the given encoder.
///
/// If `self` fails to encode anything, `encoder` will encode an
empty `.default` container in its place.
///
/// - parameter encoder: The encoder to write data to.
/// - throws: An error if any values are invalid for `encoder`'s
format.
func encode(to encoder: Encoder) throws
}
By adopting Codable, user types opt in to this archival system.
Structured types (i.e. types which encode as a collection of
properties) encode and decode their properties in a keyed manner.
Keys may be String-convertible or Int-convertible (or both), and user
types which have properties should declare semantic key enums which
map keys to their properties. Keys must conform to the CodingKey
protocol:
/// Conformance to `CodingKey` indicates that a type can be used as a
key for encoding and decoding.
public protocol CodingKey {
/// The string to use in a named collection (e.g. a string-keyed
dictionary).
var stringValue: String? { get }
/// Initializes `self` from a string.
///
/// - parameter stringValue: The string value of the desired key.
/// - returns: An instance of `Self` from the given string, or `nil`
if the given string does not correspond to any instance of `Self`.
init?(stringValue: String)
/// The int to use in an indexed collection (e.g. an int-keyed
dictionary).
var intValue: Int? { get }
/// Initializes `self` from an integer.
///
/// - parameter intValue: The integer value of the desired key.
/// - returns: An instance of `Self` from the given integer, or `nil`
if the given integer does not correspond to any instance of `Self`.
init?(intValue: Int)
}
For most types, String-convertible keys are a reasonable default; for
performance, however, Int-convertible keys are preferred, and
Encoders may choose to make use of Ints over Strings. Framework types
should provide keys which have both for flexibility and performance
across different types of Encoders. It is generally an error to
provide a key which has neither a stringValue nor an intValue.
By default, CodingKey conformance can be derived for enums which have
either String or Int backing:
enum Keys1 : CodingKey {
case a // (stringValue: "a", intValue: nil)
case b // (stringValue: "b", intValue: nil)
}
enum Keys2 : String, CodingKey {
case c = "foo" // (stringValue: "foo", intValue: nil)
case d // (stringValue: "d", intValue: nil)
}
enum Keys3 : Int, CodingKey {
case e = 4 // (stringValue: "e", intValue: 4)
case f // (stringValue: "f", intValue: 5)
case g = 9 // (stringValue: "g", intValue: 9)
}
Coding keys which are not enums, have associated values, or have
other raw representations must implement these methods manually.
In addition to automatic CodingKey conformance derivation for enums,
Codableconformance can be automatically derived for certain types as
well:
• Types whose properties are all either Codable or primitive get
an automatically derived String-backed CodingKeys enum mapping
properties to case names
• Types falling into (1) and types which provide a CodingKeys enum
(directly or via a typealias) whose case names map to properties
which are all Codableget automatic derivation of init(from:) and
encode(to:) using those properties and keys. Types may choose to
provide a custom init(from:) or encode(to:) (or both); whichever they
do not provide will be automatically derived
• Types which fall into neither (1) nor (2) will have to provide a
custom key type and provide their own init(from:) and encode(to:)
Many types will either allow for automatic derivation of all
codability (1), or provide a custom key subset and take advantage of
automatic method derivation (2).
Encoding and Decoding
Types which are encodable encode their data into a container provided
by their Encoder:
/// An `Encoder` is a type which can encode values into a native
format for external representation.
public protocol Encoder {
/// Populates `self` with an encoding container (of `.default` type)
and returns it, keyed by the given key type.
///
/// - parameter type: The key type to use for the container.
/// - returns: A new keyed encoding container.
/// - precondition: May not be called after a previous
`self.container(keyedBy:)` call of a different
`EncodingContainerType`.
/// - precondition: May not be called after a value has been encoded
through a prior `self.singleValueContainer()` call.
func container<Key : CodingKey>(keyedBy type: Key.Type) ->
KeyedEncodingContainer<Key>
/// Returns an encoding container appropriate for holding a single
primitive value.
///
/// - returns: A new empty single value container.
/// - precondition: May not be called after a prior
`self.container(keyedBy:)` call.
/// - precondition: May not be called after a value has been encoded
through a previous `self.singleValueContainer()` call.
func singleValueContainer() -> SingleValueEncodingContainer
/// The path of coding keys taken to get to this point in encoding.
var codingKeyContext: [CodingKey] { get }
}
// Continuing examples from before; below is automatically generated
by the compiler if no customization is needed.
public struct Location : Codable {
private enum CodingKeys : CodingKey {
case
latitutude
case
longitude
}
public func encode(to encoder: Encoder) throws {
// Generic keyed encoder gives type-safe key access: cannot encode
with keys of the wrong type.
let container = encoder.container(keyedBy: CodingKeys.self)
// The encoder is generic on the key -- free key autocompletion here.
try container.encode(latitude, forKey: .latitude)
try container.encode(longitude, forKey: .longitude)
}
}
public struct Farm : Codable {
private enum CodingKeys : CodingKey {
case
name
case
location
case
animals
}
public func encode(to encoder: Encoder) throws {
let container = encoder.container(keyedBy: CodingKeys.self)
try container.encode(name, forKey: .name)
try container.encode(location, forKey: .location)
try container.encode(animals, forKey: .animals)
}
}
Similarly, decodable types initialize from data read from their
Decoder's container:
/// A `Decoder` is a type which can decode values from a native
format into in-memory representations.
public protocol Decoder {
/// Returns the data stored in `self` as represented in a container
keyed by the given key type.
///
/// - parameter type: The key type to use for the container.
/// - returns: A keyed decoding container view into `self`.
/// - throws: `CocoaError.coderTypeMismatch` if the encountered
stored value is not a keyed container.
func container<Key : CodingKey>(keyedBy type: Key.Type) throws ->
KeyedDecodingContainer<Key>
/// Returns the data stored in `self` as represented in a container
appropriate for holding a single primitive value.
///
/// - returns: A single value container view into `self`.
/// - throws: `CocoaError.coderTypeMismatch` if the encountered
stored value is not a single value container.
func singleValueContainer() throws -> SingleValueDecodingContainer
/// The path of coding keys taken to get to this point in decoding.
var codingKeyContext: [CodingKey] { get }
}
// Continuing examples from before; below is automatically generated
by the compiler if no customization is needed.
public struct Location : Codable {
public init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: CodingKeys.self)
latitude
= try container.decode(Double.self, forKey: .latitude)
longitude
= try container.decode(Double.self, forKey: .longitude)
}
}
public struct Farm : Codable {
public init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: CodingKeys.self)
name
= try container.decode(String.self, forKey: .name)
location
= try container.decode(Location.self, forKey: .location)
animals
= try container.decode([Animal].self, forKey: .animals)
}
}
Keyed Encoding Containers
Keyed encoding containers are the primary interface that most Codable
types interact with for encoding and decoding. Through these, Codable
types have strongly-keyed access to encoded data by using keys that
are semantically correct for the operations they want to express.
Since semantically incompatible keys will rarely (if ever) share the
same key type, it is impossible to mix up key types within the same
container (as is possible with Stringkeys), and since the type is
known statically, keys get autocompletion by the compiler.
/// `KeyedEncodingContainer` is a generic abstract base class that
provides a view into an `Encoders` storage and is used to hold the
encoded properties of a `Codable` type.
///
/// Encoders should provide subclasses of `KeyedEncodingContainer`
for their format.
open
class KeyedEncodingContainer<Key : CodingKey> {
/// Encodes the given value for the given key.
///
/// - parameter value: The value to encode.
/// - parameter key: The key to associate the value with.
/// - throws: `CocoaError.coderInvalidValue` if the given value is
invalid in the current context for this format.
/// - precondition: The key must have a `stringValue` or `intValue`
appropriate for the encoding container type.
open
func encode<Value : Codable>(_ value: Value?, forKey key: Key) throws
/// Encodes the given value for the given key.
///
/// - parameter value: The value to encode.
/// - parameter key: The key to associate the value with.
/// - throws: `CocoaError.coderInvalidValue` if the given value is
invalid in the current context for this format.
/// - precondition: The key must have a `stringValue` or `intValue`
appropriate for the encoding container type.
open
func encode(_ value: Bool?, forKey key: Key) throws
open
func encode(_ value: Int?, forKey key: Key) throws
open
func encode(_ value: Int8?, forKey key: Key) throws
open
func encode(_ value: Int16?, forKey key: Key) throws
open
func encode(_ value: Int32?, forKey key: Key) throws
open
func encode(_ value: Int64?, forKey key: Key) throws
open
func encode(_ value: UInt?, forKey key: Key) throws
open
func encode(_ value: UInt8?, forKey key: Key) throws
open
func encode(_ value: UInt16?, forKey key: Key) throws
open
func encode(_ value: UInt32?, forKey key: Key) throws
open
func encode(_ value: UInt64?, forKey key: Key) throws
open
func encode(_ value: Float?, forKey key: Key) throws
open
func encode(_ value: Double?, forKey key: Key) throws
open
func encode(_ value: String?, forKey key: Key) throws
open
func encode(_ value: Data?, forKey key: Key) throws
/// Encodes the given object weakly for the given key.
///
/// For `Encoder`s that implement this functionality, this will only
encode the given object and associate it with the given key if it
encoded unconditionally elsewhere in the archive (either previously
or in the future).
///
/// For formats which don't support this feature, the default
implementation encodes the given object unconditionally.
///
/// - parameter object: The object to encode.
/// - parameter key: The key to associate the object with.
/// - throws: `CocoaError.coderInvalidValue` if the given value is
invalid in the current context for this format.
/// - precondition: The key must have a `stringValue` or `intValue`
appropriate for the encoding container type.
open
func encodeWeak<Object : AnyObject & Codable>(_ object: Object?,
forKey key: Key) throws
/// The path of coding keys taken to get to this point in encoding.
open
var codingKeyContext: [CodingKey]
}
/// `KeyedDecodingContainer` is a generic abstract base class that
provides a view into an `Decoders` storage and is used to hold the
encoded properties of a `Codable` type.
///
/// Decoders should provide subclasses of `KeyedDecodingContainer`
for their format.
open
class KeyedDecodingContainer<Key : CodingKey> {
/// All the keys the `Decoder` has for this container.
///
/// Different keyed containers from the same `Decoder` may return
different keys here; it is possible to encode with multiple key types
which are not convertible to one another. This should report all keys
present which are convertible to the requested type.
open
var allKeys: [Key]
/// Returns whether the `Decoder` contains a value associated with
the given key.
///
/// The value associated with the given key may be a null value as
appropriate for the data format.
///
/// - parameter key: The key to search for.
/// - returns: Whether the `Decoder` has an entry for the given key.
open
func contains(_ key: Key) -> Bool
/// Decodes a value of the given type for the given key.
///
/// A default implementation is given for these types which calls
into the abstract `decodeIfPresent` implementations below.
///
/// - parameter type: The type of value to decode.
/// - parameter key: The key that the decoded value is associated
with.
/// - returns: A value of the requested type, if present for the
given key and convertible to the requested type.
/// - throws: `CocoaError.coderTypeMismatch` if the encountered
encoded value is not convertible to the requested type.
/// - throws: `CocoaError.coderValueNotFound` if `self` does not have
an entry for the given key or if the value is null.
open
func decode(_ type: Bool.Type, forKey key: Key) throws -> Bool
open
func decode(_ type: Int.Type, forKey key: Key) throws -> Int
open
func decode(_ type: Int8.Type, forKey key: Key) throws -> Int8
open
func decode(_ type: Int16.Type, forKey key: Key) throws -> Int16
open
func decode(_ type: Int32.Type, forKey key: Key) throws -> Int32
open
func decode(_ type: Int64.Type, forKey key: Key) throws -> Int64
open
func decode(_ type: UInt.Type, forKey key: Key) throws -> UInt
open
func decode(_ type: UInt8.Type, forKey key: Key) throws -> UInt8
open
func decode(_ type: UInt16.Type, forKey key: Key) throws -> UInt16
open
func decode(_ type: UInt32.Type, forKey key: Key) throws -> UInt32
open
func decode(_ type: UInt64.Type, forKey key: Key) throws -> UInt64
open
func decode(_ type: Float.Type, forKey key: Key) throws -> Float
open
func decode(_ type: Double.Type, forKey key: Key) throws -> Double
open
func decode(_ type: String.Type, forKey key: Key) throws -> String
open
func decode(_ type: Data.Type, forKey key: Key) throws -> Data
open
func decode<Value : Codable>(_ type: Value.Type, forKey key: Key)
throws -> Value
/// Decodes a value of the given type for the given key, if present.
///
/// This method returns `nil` if the container does not have a value
associated with `key`, or if the value is null. The difference
between these states can be disambiguated with a `contains(_:)` call.
///
/// - parameter type: The type of value to decode.
/// - parameter key: The key that the decoded value is associated
with.
/// - returns: A decoded value of the requested type, or `nil` if the
`Decoder` does not have an entry associated with the given key, or if
the value is a null value.
/// - throws: `CocoaError.coderTypeMismatch` if the encountered
encoded value is not convertible to the requested type.
open
func decodeIfPresent(_ type: Bool.Type, forKey key: Key) throws ->
Bool?
open
func decodeIfPresent(_ type: Int.Type, forKey key: Key) throws ->
Int?
open
func decodeIfPresent(_ type: Int8.Type, forKey key: Key) throws ->
Int8?
open
func decodeIfPresent(_ type: Int16.Type, forKey key: Key) throws ->
Int16?
open
func decodeIfPresent(_ type: Int32.Type, forKey key: Key) throws ->
Int32?
open
func decodeIfPresent(_ type: Int64.Type, forKey key: Key) throws ->
Int64?
open
func decodeIfPresent(_ type: UInt.Type, forKey key: Key) throws ->
UInt?
open
func decodeIfPresent(_ type: UInt8.Type, forKey key: Key) throws ->
UInt8?
open
func decodeIfPresent(_ type: UInt16.Type, forKey key: Key) throws ->
UInt16?
open
func decodeIfPresent(_ type: UInt32.Type, forKey key: Key) throws ->
UInt32?
open
func decodeIfPresent(_ type: UInt64.Type, forKey key: Key) throws ->
UInt64?
open
func decodeIfPresent(_ type: Float.Type, forKey key: Key) throws ->
Float?
open
func decodeIfPresent(_ type: Double.Type, forKey key: Key) throws ->
Double?
open
func decodeIfPresent(_ type: String.Type, forKey key: Key) throws ->
String?
open
func decodeIfPresent(_ type: Data.Type, forKey key: Key) throws ->
Data?
open
func decodeIfPresent<Value : Codable>(_ type: Value.Type, forKey key:
Key) throws -> Value?
/// The path of coding keys taken to get to this point in decoding.
open
var codingKeyContext: [CodingKey]
}
These encode(_:forKey:) and decode(_:forKey:) overloads give strong,
static type guarantees about what is encodable (preventing accidental
attempts to encode an invalid type), and provide a list of primitive
types which are common to all encoders and decoders that users can
rely on.
Coming in Swift 4 is the ability to express that "a collection of
things which are Codable is Codable" (conditional conformance),
allowing collections which we extend (Array, Dictionary, etc.) to
fall into these overloads as well.
Encoding Container Types
For some types, the container into which they encode has meaning.
Especially when coding for a specific output format (e.g. when
communicating with a JSON API), a type may wish to explicitly encode
as an array or a dictionary:
// Continuing from before
public protocol Encoder {
/// Populates `self` with an encoding container of the given type and
returns it, keyed by the given key type.
///
/// A default implementation of `Encoder.container(keyedBy:)` calls
this method with a container type of `.default`.
///
/// - parameter keyType: The key type to use for the container.
/// - parameter containerType: The container type to create.
/// - returns: A new keyed encoding container.
/// - precondition: May not be called after a previous
`self.container(keyedBy:)` call of a different
`EncodingContainerType`.
/// - precondition: May not be called after a value has been encoded
through a prior `self.singleValueContainer()` call.
func container<Key : CodingKey>(keyedBy keyType: Key.Type, type
containerType: EncodingContainerType) -> KeyedEncodingContainer<Key>
}
/// An `EncodingContainerType` specifies the type of container an
`Encoder` should use to store values.
public enum EncodingContainerType {
/// The `Encoder`'s preferred container type; equivalent to either
`.array` or `.dictionary` as appropriate for the encoder.
case `default
`
/// Explicitly requests the use of an array to store encoded values.
case
array
/// Explicitly requests the use of a dictionary to store encoded
values.
case
dictionary
}
Single Value Containers
For other types, an array or dictionary container may not even make
sense (e.g. values which are RawRepresentable as a single primitive
value). Those types may encode and decode directly as a single value,
instead of requesting a keyed container:
/// A `SingleValueEncodingContainer` is a container which can support
the storage and direct encoding of a single non-keyed value.
public protocol SingleValueEncodingContainer {
/// Encodes a single value of the given type.
///
/// - parameter value: The value to encode.
/// - throws: `CocoaError.coderInvalidValue` if the given value is
invalid in the current context for this format.
/// - precondition: May not be called after a previous
`self.encode(_:)` call.
func encode(_ value: Bool) throws
func encode(_ value: Int) throws
func encode(_ value: Int8) throws
func encode(_ value: Int16) throws
func encode(_ value: Int32) throws
func encode(_ value: Int64) throws
func encode(_ value: UInt) throws
func encode(_ value: UInt8) throws
func encode(_ value: UInt16) throws
func encode(_ value: UInt32) throws
func encode(_ value: UInt64) throws
func encode(_ value: Float) throws
func encode(_ value: Double) throws
func encode(_ value: String) throws
func encode(_ value: Data) throws
}
/// A `SingleValueDecodingContainer` is a container which can support
the storage and direct decoding of a single non-keyed value.
public protocol SingleValueDecodingContainer {
/// Decodes a single value of the given type.
///
/// - parameter type: The type to decode as.
/// - returns: A value of the requested type.
/// - throws: `CocoaError.coderTypeMismatch` if the encountered
encoded value cannot be converted to the requested type.
func decode(_ type: Bool.Type) throws -> Bool
func decode(_ type: Int.Type) throws -> Int
func decode(_ type: Int8.Type) throws -> Int8
func decode(_ type: Int16.Type) throws -> Int16
func decode(_ type: Int32.Type) throws -> Int32
func decode(_ type: Int64.Type) throws -> Int64
func decode(_ type: UInt.Type) throws -> UInt
func decode(_ type: UInt8.Type) throws -> UInt8
func decode(_ type: UInt16.Type) throws -> UInt16
func decode(_ type: UInt32.Type) throws -> UInt32
func decode(_ type: UInt64.Type) throws -> UInt64
func decode(_ type: Float.Type) throws -> Float
func decode(_ type: Double.Type) throws -> Double
func decode(_ type: String.Type) throws -> String
func decode(_ type: Data.Type) throws -> Data
}
// Continuing example from before; below is automatically generated
by the compiler if no customization is needed.
public enum Animal : Int, Codable {
public func encode(to encoder: Encoder) throws {
// Encode as a single value; no keys.
try encoder.singleValueContainer.encode(self.rawValue)
}
public init(from decoder: Decoder) throws {
// Decodes as a single value; no keys.
let intValue = try decoder.singleValueContainer().decode(Int.self)
if let value = Self(rawValue: intValue) {
self =
value
} else {
throw CocoaError.error(.coderReadCorrupt)
}
}
}
In the example given above, since Animal uses a single value
container, [.chicken, .dog, .cow, .turkey, .dog, .chicken, .cow,
.turkey, .dog]would encode directly as [1, 2, 4, 3, 2, 1, 4, 3, 2].
Nesting
In practice, some types may also need to control how data is nested
within their container, or potentially nest other containers within
their container. Keyed containers allow this by returning nested
containers of differing key types:
// Continuing from before
open
class KeyedEncodingContainer<Key : CodingKey> {
/// Stores an encoding container for the given key and returns it.
///
/// - parameter keyType: The key type to use for the container.
/// - parameter containerType: The container type to create.
/// - parameter key: The key to encode the container for.
/// - returns: A new keyed encoding container.
open
func nestedContainer<NestedKey : CodingKey>(keyedBy keyType:
NestedKey.Type, type containerType: EncodingContainerType, forKey
key: Key) -> KeyedEncodingContainer<NestedKey>
}
open
class KeyedDecodingContainer<Key : CodingKey> {
/// Returns the data stored for the given key as represented in a
container keyed by the given key type.
///
/// - parameter type: The key type to use for the container.
/// - parameter key: The key that the nested container is associated
with.
/// - returns: A keyed decoding container view into `self`.
/// - throws: `CocoaError.coderTypeMismatch` if the encountered
stored value is not a container.
open
func nestedContainer<NestedKey : CodingKey>(keyedBy type:
NestedKey.Type, forKey key: Key) throws ->
KeyedDecodingContainer<NestedKey>
}
This can be common when coding against specific external data
representations:
// User type for interfacing with a specific JSON API. JSON API
expects encoding as {"id": ..., "properties": {"name": ...,
"timestamp": ...}}. Swift type differs from encoded type, and
encoding needs to match a spec:
struct Record : Codable {
// We care only about these values from the JSON payload
let id: Int
let name: String
let timestamp: Double
// ...
private enum Keys : CodingKey {
case
id
case
properties
}
private enum PropertiesKeys : CodingKey {
case
name
case
timestamp
}
public func encode(to encoder: Encoder) throws {
let container = encoder.container(keyedBy: Keys.self, type:
.dictionary)
try container.encode(id, forKey: .id)
// Set a dictionary for the "properties" key
let nested = container.nestedContainer(keyedBy: PropertiesKeys.self,
type: .dictionary, forKey: .properties)
try nested.encode(name, forKey: .name)
try nested.encode(timestamp, forKey: .timestamp)
}
public init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: Keys.self)
id
= try container.decode(Int.self, forKey: .id)
let nested = try container.nestedContainer(keyedBy:
PropertiesKeys.self, forKey: .properties)
name
= try nested.decode(String.self, forKey: .name)
timestamp
= try nested.decode(Double.self, forKey: .timestamp)
}
}
Inheritance
Inheritance in this system is supported much like it is with NSCoding
— on encoding, objects which inherit from a type that is Codable
encode super using their encoder, and pass a decoder to
super.init(from:) on decode. With the existing NSCoding API, this is
most often done like so, by convention:
- (void)encodeWithCoder:(NSCoder *)encoder {
[super encodeWithCoder:encoder];
// ... encode properties
}
- (instancetype)initWithCoder:(NSCoder *)decoder {
if ((self = [super initWithCoder:decoder])) {
// ... decode properties
}
return self;
}
In practice, this approach means that the properties of self and the
properties of super get encoded into the same container: if self
encodes values for keys "a", "b", and "c", and super encodes "d",
"e", and "f", the resulting object is archived as {"a": ..., "b":
..., "c": ..., "d": ..., "e": ..., "f": ...}. This approach has two
drawbacks:
• Things which self encodes may overwrite super's (or vice versa,
depending on when -[super encodeWithCoder:] is called
• self and super may not encode into different container types
(e.g. self in a sequential fashion, and super in a keyed fashion)
The second point is not an issue for NSKeyedArchiver, since all
values encode with keys (sequentially coded elements get
autogenerated keys). This proposed API, however, allows for self and
super to explicitly request conflicting containers (.arrayand
.dictionary, which may not be mixed, depending on the data format).
To remedy both of these points, we adopt a new convention for
inheritance-based coding — encoding super as a sub-object of self:
public class MyCodable : SomethingCodable {
public func encode(to encoder: Encoder) throws {
let container = encoder.container(keyedBy: CodingKeys.self)
// ... encode some properties
// superEncoder() gives `super` a nested container to encode into
(for
// a predefined key).
try super.encode(to: container.superEncoder())
}
public init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: CodingKeys.self)
// ... decode some properties
// Allow `super` to decode from the nested container.
try super.init(from: container.superDecoder())
}
}
If a shared container is desired, it is still possible to call
super.encode(to: encoder) and super.init(from: decoder), but we
recommend the safer containerized option.
superEncoder() and superDecoder() are provided on
KeyedEncodingContainer and KeyedDecodingContainer to provide handles
to containers for super to use. While users may specify a custom key
to encode super with, the default behavior is to use a key with a
stringValue of "super" and an intValue of 0:
// Continuing from before
open
class KeyedEncodingContainer<Key : CodingKey> {
/// Stores a new nested container for the default `super` key and
returns a new `Encoder` instance for encoding `super` into that
container.
///
/// Equivalent to calling `superEncoder(forKey:)` with
`Key(stringValue: "super", intValue: 0)`.
///
/// - returns: A new `Encoder` to pass to `super.encode(to:)`.
open
func superEncoder() -> Encoder
/// Stores a new nested container for the given key and returns a new
`Encoder` instance for encoding `super` into that container.
///
/// - parameter key: The key to encode `super` for.
/// - returns: A new `Encoder` to pass to `super.encode(to:)`.
/// - precondition: The key must have a `stringValue` or `intValue`
appropriate for the encoding container type.
open
func superEncoder(forKey key: Key) -> Encoder
}
open
class KeyedDecodingContainer<Key : CodingKey> {
/// Returns a `Decoder` instance for decoding `super` from the
container associated with the default `super` key.
///
/// Equivalent to calling `superDecoder(forKey:)` with
`Key(stringValue: "super", intValue: 0)`.
///
/// - returns: A new `Decoder` to pass to `super.init(from:)`.
/// - throws: `CocoaError.coderValueNotFound` if `self` does not have
an entry for the default `super` key, or if the stored value is null.
open
func superDecoder() throws -> Decoder
/// Returns a `Decoder` instance for decoding `super` from the
container associated with the given key.
///
/// - parameter key: The key to decode `super` for.
/// - returns: A new `Decoder` to pass to `super.init(from:)`.
/// - throws: `CocoaError.coderValueNotFound` if `self` does not have
an entry for the given key, or if the stored value is null.
open
func superDecoder(forKey key: Key) throws -> Decoder
}
Primitive Codable Conformance
The encoding container types offer overloads for working with and
processing the API's primitive types (String, Int, Double, etc.).
However, for ease of implementation (both in this API and others), it
can be helpful for these types to conform to Codable themselves.
Thus, along with these overloads, we will offer Codableconformance on
these types:
extension Bool : Codable {
public init(from decoder: Decoder) throws {
self = try decoder.singleValueContainer().decode(Bool.self)
}
public func encode(to encoder: Encoder) throws {
try encoder.singleValueContainer().encode( self)
}
}
// Repeat for others...
This conformance allows one to write functions which accept Codable
types without needing specific overloads for the fifteen primitive
types as well. This also simplifies conditional conformance (e.g.
expressing "extension Array : Codable where Element : Codable") by
removing the need for additional explicit conformances for these
types.
Since Swift's function overload rules prefer more specific functions
over generic functions, the specific overloads are chosen where
possible (e.g. encode("Hello, world!", forKey: .greeting) will choose
encode(_: String, forKey: Key) over encode<T : Codable>(_: T, forKey:
Key)). This maintains performance over dispatching through the
Codable existential, while allowing for the flexibility of fewer
overloads where applicable.
Additional Extensions
Along with the primitive Codable conformance above, extensions on
CodableRawRepresentable types whose RawValue is a primitive types
will provide default implementations for encoding and decoding:
public extension RawRepresentable where RawValue == Bool, Self :
Codable {
public init(from decoder: Decoder) throws {
let decoded = try
decoder.singleValueContainer().decode(RawValue.self)
guard let value = Self(rawValue: decoded) else {
throw CocoaError.error(.coderReadCorrupt)
}
self =
value
}
public func encode(to encoder: Encoder) throws {
try encoder.singleValueContainer().encode(self.rawValue)
}
}
// Repeat for others...
This allows for trivial Codable conformance of enum types (and manual
RawRepresentable implementations) with primitive backing.
Source compatibility
This proposal is additive — existing code will not have to change
due to this API addition. This implementation can be made available
in both Swift 4 and the Swift 3 compatibility mode.
Effect on ABI stability
The addition of this API will not be an ABI-breaking change. However,
this will add limitations for changes in future versions of Swift, as
parts of the API will have to remain unchanged between versions of
Swift (barring some additions, discussed below).
Effect on API resilience
Much like new API added to the standard library, once added, many
changes to this API will be ABI- and source-breaking changes. In
particular, changes which change the types or names of methods or
arguments, add required methods on protocols or classes, or remove
supplied default implementations will break client behavior.
The following protocols and classes may not have methods added to
them without providing default implementations:
• Codable
• CodingKey
• Encoder
• SingleValueEncodingContainer
• KeyedEncodingContainer
• Decoder
• SingleValueDecodingContainer
• KeyedDecodingContainer
The following classes may not remove existing default
implementations:
• KeyedEncodingContainer
• KeyedDecodingContainer
Various extensions to Swift primitive types (Bool, Int, Double, etc.)
and to RawRepresentable types (where RawValue == Bool, == Int, ==
Double, etc.) may also not be removed.
In general, changes to the proposed types will be restricted as
described in the library evolution document in the Swift repository.
_______________________________________________
swift-evolution mailing list
[email protected]
https://lists.swift.org/mailman/listinfo/swift-evolution
