I think the Traffic is a bigger Problem... I must make a line from a "little
Kaff" to a "littlerer Kaff" (wo sich Hase und Fuchs gute Nacht wünschen...)
The distance is on air 12 km... on Cable is i think till 10 times more...
This is the Problem...
On this distance I'm happy when I have the normal 1.8 mb on SDSL or 4 MB on
Swisslink Data...
The 3. way if Fredy has a 10 MB Line on this "Käffer"...
----- Original Message -----
From: "Lukas Beeler" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, August 27, 2006 11:39 AM
Subject: Re: [swinog] SDSL
* Xaver Aerni <[EMAIL PROTECTED]>:
I'm working on a Projekt we are needing a Line for ca 3 Mbit. Is it
possible to multiplex 2 SDSL Lines to a 3 Mbit Line... that we have
3.6 Mbits
We don't use Internet Connect we must only connect two Points.
That's easily possible, if you have both end points under your
controller. You will need a device which is capable of "mixing"
the datastream.
Depending on your budget and application, you can use two Linux
or *BSD based machines with some SDSL Bridges (e.G. ZyXEL), or
you can buy a router appliance equipped with two SDSL cards and
the appropiate licenses.
If you need the latter, talk with the presales support of your
distributor, they can tell you which products can fulfill your
needs.
If you are on a limited budget, you might try the first variant.
This needs more technical expertise, though.
_______________________________________________
swinog mailing list
[email protected]
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
_______________________________________________
swinog mailing list
[email protected]
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
