I think this is a good Idea... Swisscom could also look on the Dslam Log if
you have to many errors on the Line... Many of the problems could be
elemated by lower rates.
Greetings Xaver
----- Original Message -----
From: "Olivier Mueller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, March 05, 2008 4:03 PM
Subject: Re: [swinog] VDSL/Zyxel P2802 HWL not "strong" enough for
asmallcompany LAN?
On Wed, 2008-03-05 at 14:56 +0100, Xaver Aerni wrote:
What kind of Setup did you have on the Dislam... Please check if the link
is
going down... If yes. Swisscom should reduce the Traffic rate on the
line.
Standard is the max. by 25000. Some line must be fixed on 20000 or
less...
The status of port is showtime
Link type: VDSL2
Bearer1 downstream rate: 27536 kbps
Bearer1 upstream rate: 11040 kbps
So before getting an Alix board, you suggest I should first
ask Swisscom (via Green) to reduce the rate?
Regards & thanks for your feedback!
Olivier
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog