hello

we have two 7206VXR equipped with NPE-G1 (512MB) they are up an running
since mid of november 02. we're using them as BGP-routers - so far only one
problem: the 3 onbard-interfaces should be GBIC or 10/100/1000BASE-T - but
if you use the RJ45-connector with other settings than "speed 1000, duplex
full" (e.q. speed 100, duplex full) the interface is flapping (as soon as
you have bidirectional load) and you have major packet loss... :( we tried
both of the available software-versions und two differend hw-revisions

overall performance seems to be great: 50% CPU load with the NPE-400 (256MB)
- 11% with the NPE-G1!
sorry for not beeing able to comment the throughput-issue - we're using no
more than 150mbps on a single interface yet.

greetz, mark


btw: there is a second CPU on board - datasheet says: not in use yet :)

-----Urspr�ngliche Nachricht-----
Von: Guentensperger, Robert [mailto:[EMAIL PROTECTED]] 
Gesendet: Freitag, 24. Januar 2003 15:23
An: '[EMAIL PROTECTED]'
Betreff: [swinog] Experience with NPE-G1 for the Cisco 720x


Dear Members, 
Has anyone experience with the NPE-G1 for the Cisco 720x? 
http://www.cisco.com/en/US/products/hw/routers/ps341/products_data_sheet0918
6a00800c6bd6.html 
I'm interested in good/bad experience and espacially interested in the
throughput of the 3 GigE/FE ports. 


Thank you in advance and have a nice weekend! 
Robert 


Robert Guentensperger 
Support Engineer 
sunrise 
TDC Switzerland AG 
Wireline Data 
Hofwisenstrasse 50 
8153 Ruemlang 
Phone   +41 1  555 66 49 
Mobile  +41 76 555 66 49 
Fax     +41 1  555 66 09 
[EMAIL PROTECTED] 
www.sunrise.ch 
----------------------------------------------
[EMAIL PROTECTED] Maillist-Archive:
http://www.mail-archive.com/swinog%40swinog.ch/

Reply via email to