Yes Gary, This is because when you do a send on a particular message context it will put the transfer-encoding on that message context and when you try to do the second send it will try to write the same header which is already present because this second mediator also tries to access the same message context (reference). At the same time there can be conflicts in this case because the http sender and smtp sender both tries to write headers to the same message context.
I also suggest to try the simple scenario working first, that is to get the response back to the client without the mail transport. Then try to get the message only through the mail transport (in both cases 1 send mediator on the out). If you have succeeded in both here is the configuration that you should try to achieve both. <out> <clone> <target><sequence><send/></sequence></target> <target endpoint="reference_to_mailto:endpoint"/> </clone> </out> If you encounter any problems in one of these three steps (only to client, only through mail, both) report them to us so that we can help you through. Thanks, Ruwan On 9/21/07, Paul Fremantle <[EMAIL PROTECTED]> wrote: > > Gary > > I think you need to use a "clone" mediator to do what you want (i.e. > sending a copy of the response message to the mail destination). It > also seems possible there is a bug. > > We have such a mediator (Ruwan wrote one), but can you try a simpler > scenario first - just route the original request to mail? > > Paul > > On 9/20/07, Geiglein, Gary <[EMAIL PROTECTED]> wrote: > > I thought it would be this simple, but this generates several errors. > > > > 111661 [HttpClientWorker-1] ERROR ServerHandler (ServerHandler.java:291) > > - Unexpected HTTP protocol error : Transfer-encoding header already > > present > > org.apache.http.ProtocolException: Transfer-encoding header already > > present > > at > > org.apache.http.protocol.ResponseContent.process(ResponseContent.java:66 > > ) > > ... > > > > > > 111723 [HttpClientWorker-1] ERROR HttpCoreNIOSender > > (HttpCoreNIOSender.java:456) - IO Error sending response message > > org.apache.axis2.AxisFault: Pipe closed > > at > > org.apache.axis2.transport.http.SOAPMessageFormatter.writeTo(SOAPMessage > > Formatter.java:59) > > > > ... > > > > 111801 [HttpClientWorker-1] ERROR Axis2Sender (Axis2Sender.java:104) - > > Unexpected error during Sending message back > > org.apache.axis2.AxisFault: IO Error sending response message > > > > It looks like the mail transport is not being used, the classes that are > > throwing the exceptions org.apache.http.protocol.ResponseContent and > > org.apache.axis2.transport.http.SOAPMessageFormatter are in HTTP > > packages and I don't see anything coming from > > org.apache.axis2.transport.mail > > > > The entire log files for running both with & without mail configured in > > synapse.xml, along with the config files can be found @ > > http://deais.nci.nih.gov/Public/Synapse/ > > > > -----Original Message----- > > From: Upul Godage [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, September 19, 2007 5:34 AM > > To: [email protected] > > Subject: Re: How do I send a SMTP payload? > > > > Hi Geiglein, > > > > You can have the synapse configuration as follows. > > > > <definitions xmlns="http://ws.apache.org/ns/synapse";> > > <!-- log all attributes of messages passing through --> > > <log level="full"/> > > <send> > > <endpoint> > > <address uri="mailto:[EMAIL PROTECTED]"/> > > </endpoint> > > </send> > > <!-- Send the messageto implicit destination --> > > <send/> > > </definitions> > > > > Hope this helps. > > > > Upul > > > > > > On 9/18/07, Geiglein, Gary <[EMAIL PROTECTED]> wrote: > > > > > > I understand the axis2 configuration. I guess my problem is defining > > the > > > endpoint for synapse. > > > > > > How do I configure an endpoint to use the "mailto" transport > > configured > > > in axis. I would like to change the delivered synapse.xml to receive > > the > > > request as configured in the quick start, then both return the result > > to > > > the client, and email a copy through the configured mailto transport > > > sender. > > > > > > -----Original Message----- > > > From: Asankha C. Perera [mailto:[EMAIL PROTECTED] > > > Sent: Tuesday, September 18, 2007 3:55 AM > > > To: [email protected] > > > Subject: Re: How do I send a SMTP payload? > > > > > > Hi Geiglein > > > > > > You need to enable the mail transport in your axis2.xml by > > uncommenting > > > the following and configuring the elements according to your > > > environment. Also check the following links for more information. From > > > within Synapse, you just use a mail EPR to send it via the mail > > > transport. > > > > > > Let me know if you run into any issues > > > asankha > > > > > > http://ws.apache.org/axis2/1_3/mail-configuration.html > > > http://wso2.org/library/2537 > > > > > > <!-- Mail Transport Listener --> > > > <!-- This is a sample configuration. It assumes a mail server > > > running in localhost. > > > Listener pops messages that comes to the email address > > > [EMAIL PROTECTED] Users > > > password is red. Listener connect to the server every 3000 > > > milliseconds. > > > Parameters with "transport." prefix is Axis2 specific. Others > > > are all from Java Mail API. > > > http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html > > > --> > > > <!--<transportReceiver name="mailto" > > > class="org.apache.axis2.transport.mail.SimpleMailListener"> > > > <parameter name="mail.pop3.host">localhost</parameter> > > > <parameter name="mail.pop3.user">red</parameter> > > > <parameter name="mail.store.protocol">pop3</parameter> > > > <parameter name="transport.mail.pop3.password">red</parameter> > > > <parameter > > > name="transport.mail.replyToAddress">[EMAIL PROTECTED]</parameter> > > > <parameter name="transport.listener.interval">3000</parameter> > > > </transportReceiver>--> > > > > > > ...... > > > <!-- Mail Transport Sender --> > > > <!--Only need to uncomment the sender. Configuration is achieved > > > with every client. > > > At any instant mail host should be given. Sample configuration > > > has been given. > > > http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html--> > > > <!-- ================================================= --> > > > <!--<transportSender name="mailto" > > > class="org.apache.axis2.transport.mail.MailTransportSender"> > > > <parameter name="mail.smtp.host">localhost</parameter> > > > </transportSender>--> > > > > > > > > > > > > Geiglein, Gary wrote: > > > > The introduction says that you support SMTP but I don't see anything > > > in > > > > the documentation, examples, or tests to give a clue how to set this > > > up. > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > -- > Paul Fremantle > Co-Founder and VP of Technical Sales, WSO2 > OASIS WS-RX TC Co-chair > > blog: http://pzf.fremantle.org > [EMAIL PROTECTED] > > "Oxygenating the Web Service Platform", www.wso2.com > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > -- Ruwan Linton http://www.wso2.org - "Oxygenating the Web Services Platform"
