I cannot use synce with iPAQ rx3715. It fails even in the stage of ipaq modprobe:
# modprobe ipaq ... usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5 ipaq 5-1:2.0: PocketPC PDA converter detected drivers/usb/serial/ipaq.c: active config #2 != 1 ?? ipaq: probe of 5-1:2.0 failed with error -5 usbcore: registered new driver ipaq # cat /proc/usb/devices | grep -i ipaq Bus 005 Device 005: ID 03f0:1016 Hewlett-Packard Jornada 548 / iPAQ HW6515 Pocket PC # cat /proc/bus/usb/devices ... T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 1 P: Vendor=03f0 ProdID=1016 Rev= 0.00 C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... (note: #Cfgs= 1 , Cfg#= 2) As result, there is no ttyUSB device in /dev/tts created. I have tried this on 2.6.15 and 2.6.16, always the same. Synce works for the old H3800 without any problems. The device is HP iPAQ rx3715 with Windows Mobile 2003 SE (version 4.21.1088, build 14235.2.0.0) Thanks for any help, MB ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ Synce-devel mailing list Synce-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel