Technical information Device: HP iPAQ (h2200 series) Product number: FA103A Serial number: TWC348493Y Number of USB endpoints: 2 Vendor/Product USB ID: Vendor=03f0 ProdID=1016
Computer: i686 AMD Athlon XP Operatin System: Gentoo Linux Kernel version: 2.6.16-gentoo-r9 Interface: xorg-x11-6.8.2-r8 Desktop environment: KDE 3.4.3 Hello. I refer to the walkthrough at "http://synce.sourceforge.net/synce/howto.php"; In this walkthrough, I am told to send you an e-mail if some conditions does not apply as expected. Therefore I am sending you this letter. When trying synce(tm) on my computer, I get the following results: While doing the commands "cat /proc/bus/usb/devices > /tmp/before" "cat /proc/bus/usb/devices > /tmp/after" "diff /tmp/before /tmp/after" I get this output: 23a24,31 > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 1 > P: Vendor=03f0 ProdID=1016 Rev= 0.00 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Going further to the section called "The Driver entry": I suppose that the kernel driver does not recognize my device, and so I am sending an e-mail (this letter), and following "Appendix A" as described in the walkthrough. After the adjustments is done, I do the above mentioned method once more, and get this output: 23a24,31 > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 1 > P: Vendor=03f0 ProdID=1016 Rev= 0.00 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ipaq > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms And so I guess that the driver is now recognized. Reaching section "7. Testing the connection", I get the error-message: "pstatus: Unable to initialize RAPI: An unspecified failure has occurred" I have not yet tried to "get help", but I choose to notify you of this error-message, as I think this error may occur due to the fact that my device has not been compatible with synce(tm) before I believe that bugs and errors like the one mentioned could be results of incompatibility with my specific device at this point. Hopefully you will be able to fix this kind of errors with the help of this feedback, and similar. Anyway, my device did connect without errors at section "6. Starting the connection". So I guess that the driver should work properly with some small adjustments. I hope that you find this information useful. ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Synce-devel mailing list Synce-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
