Hello, I was trying to configure synCE but the kernel doesn't recognize my PDA. I'm using KDE.
Here are the needed informations: 1. 2.6.20 (custom compiled kernel, all neccessary modules compiled) 2. MDA-Vario II 3. Vendor=0bb4 ProdID=0b04 The output from the diff /tmp/before /tmp/after command (I'm using the HOWTO on the website): helios dinchamion # diff /tmp/before /tmp/after 34a35,47 > T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0bb4 ProdID=0b04 Rev= 0.00 > S: Manufacturer=HTC > S: Product=Generic RNDIS > S: SerialNumber=00197735-6115-0147-5800-0050bf3f5173 > C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms > I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > And the output of dmesg | grep usb: helios dinchamion # dmesg | grep usb usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usb usb1: configuration #1 chosen from 1 choice usb usb2: configuration #1 chosen from 1 choice usb 2-3: new full speed USB device using ohci_hcd and address 2 usb 2-3: configuration #1 chosen from 1 choice usbcore: registered new interface driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x106A usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usbcore: registered new interface driver usb-storage usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5 usbcore: registered new interface driver ipaq drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 usbcore: registered new interface driver emi62 - firmware loader usbcore: registered new interface driver ldusb usb usb3: configuration #1 chosen from 1 choice usbcore: registered new interface driver hci_usb usbcore: registered new interface driver bcm203x usbcore: registered new interface driver bpa10x usbcore: registered new interface driver bfusb usb 2-6: new full speed USB device using ohci_hcd and address 3 usb 2-6: configuration #1 chosen from 1 choice usb 2-6: USB disconnect, address 3 According to the forums, my device should be able to connect. Any pointers or ideas are greately appreciated! Thanks, Gergely Fazekas ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
