-------- Original-Nachricht -------- Datum: Mon, 09 Jul 2007 16:06:55 +0200 Von: "Dennis Herber" <[EMAIL PROTECTED]> An: [EMAIL PROTECTED] Betreff: Re: [Synce-devel] Problems installing synce
Okay, I loaded the three modules step for step (each one with one modprobe-command) and there was no error. lsmod says: ---snip--- Module Size Used by rndis_host 8192 0 cdc_ether 7424 1 rndis_host usbnet 19976 2 rndis_host,cdc_ether ipaq 34456 0 usbserial 32488 1 ipaq vmnet 32932 13 vmmon 185676 0 binfmt_misc 12680 1 rfcomm 40856 0 l2cap 25728 5 rfcomm bluetooth 55908 4 rfcomm,l2cap ipv6 268704 12 ppdev 10116 0 acpi_cpufreq 10056 1 cpufreq_userspace 5408 0 cpufreq_stats 7360 0 cpufreq_powersave 2688 0 cpufreq_ondemand 9228 1 freq_table 5792 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand cpufreq_conservative 8200 0 tc1100_wmi 8068 0 pcc_acpi 13184 0 dev_acpi 12292 0 sony_acpi 6284 0 video 16388 0 sbs 15652 0 i2c_ec 5888 1 sbs dock 10268 0 button 8720 0 battery 10756 0 container 5248 0 ac 6020 0 asus_acpi 17308 0 backlight 7040 1 asus_acpi aes 28608 1 cbc 5504 1 blkcipher 6784 1 cbc dm_crypt 14856 1 dm_mod 59084 3 dm_crypt sbp2 23812 0 parport_pc 36388 0 lp 12452 0 parport 36936 3 ppdev,parport_pc,lp snd_hda_intel 21912 1 snd_hda_codec 205440 1 snd_hda_intel snd_pcm_oss 44544 0 snd_pcm 79876 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_mixer_oss 17408 1 snd_pcm_oss snd_seq_dummy 4740 0 snd_seq_oss 32896 0 snd_seq_midi 9600 0 snd_rawmidi 25472 1 snd_seq_midi snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 23684 2 snd_pcm,snd_seq snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq ipw3945 118816 1 joydev 10816 0 nvidia 6837140 22 ieee80211 34760 1 ipw3945 snd 54020 12 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8672 1 snd sdhci 18700 0 mmc_core 26756 1 sdhci ieee80211_crypt 7040 1 ieee80211 pcmcia 39212 0 snd_page_alloc 10888 2 snd_hda_intel,snd_pcm i2c_core 22784 2 i2c_ec,nvidia tifm_7xx1 10240 0 tifm_core 9856 1 tifm_7xx1 yenta_socket 27532 1 rsrc_nonstatic 14080 1 yenta_socket pcmcia_core 40852 3 pcmcia,yenta_socket,rsrc_nonstatic iTCO_wdt 11812 0 iTCO_vendor_support 4868 1 iTCO_wdt intel_agp 25116 1 agpgart 35400 2 nvidia,intel_agp shpchp 34324 0 pci_hotplug 32576 1 shpchp psmouse 38920 0 serio_raw 7940 0 af_packet 23816 2 evdev 11008 4 tsdev 8768 0 ext3 133128 4 jbd 59816 1 ext3 mbcache 9604 1 ext3 sg 36252 0 sr_mod 17060 0 cdrom 37664 1 sr_mod sd_mod 23428 6 ata_piix 15492 5 ata_generic 9092 0 libata 125720 2 ata_piix,ata_generic scsi_mod 142348 5 sbp2,sg,sr_mod,sd_mod,libata usbhid 26592 0 hid 27392 1 usbhid ehci_hcd 34188 0 generic 5124 0 [permanent] e100 36232 0 mii 6528 2 usbnet,e100 ohci1394 36528 0 ieee1394 299448 2 sbp2,ohci1394 uhci_hcd 25360 0 usbcore 134280 9 rndis_host,cdc_ether,usbnet,ipaq,usbserial,usbhid,ehci_hcd,uhci_hcd thermal 14856 0 processor 31048 2 acpi_cpufreq,thermal fan 5636 0 capability 5896 0 commoncap 8192 1 capability vesafb 9220 1 fbcon 42656 71 tileblit 3584 1 fbcon font 9216 1 fbcon bitblit 6912 1 fbcon softcursor 3200 1 bitblit ---snip--- So the three modules are now correctly loaded. Next, I start $ sudo odccm No error again, so looks good. But then: $ tail -f /var/log/messages Jul 9 15:49:12 ward kernel: [25992.508000] ipaq ttyUSB0: PocketPC PDA converter now disconnected from ttyUSB0 Jul 9 15:49:12 ward kernel: [25992.508000] ipaq 2-1:1.0: device disconnected Jul 9 15:49:12 ward kernel: [25992.508000] ipaq ttyUSB1: PocketPC PDA converter now disconnected from ttyUSB1 Jul 9 15:49:12 ward kernel: [25992.508000] ipaq 2-1:1.1: device disconnected Jul 9 15:49:17 ward kernel: [25997.536000] usb 2-1: new full speed USB device using uhci_hcd and address 8 Jul 9 15:49:17 ward kernel: [25997.712000] usb 2-1: configuration #1 chosen from 1 choice Jul 9 15:49:17 ward kernel: [25997.712000] ipaq 2-1:1.0: PocketPC PDA converter detected Jul 9 15:49:17 ward kernel: [25997.716000] usb 2-1: PocketPC PDA converter now attached to ttyUSB0 Jul 9 15:49:17 ward kernel: [25997.716000] ipaq 2-1:1.1: PocketPC PDA converter detected Jul 9 15:49:17 ward kernel: [25997.716000] usb 2-1: PocketPC PDA converter now attached to ttyUSB1 So the issue is that the device is not related to rndis, but to ipaq. In the board of the synce site, somebody managed to get my device running with rndis, but as far as I can see, this looks like a problem of my device. What I now did is to look through all settings of my device, but I didn´t found any point where to switch the device to rndis. But: When I connect it under windows, it´s recoginzed as "rndis device", so this looks fine. Could you please tell me what I can do next to get it running under linux? Regards, Dennis Neumeier -------- Original-Nachricht -------- Datum: Mon, 9 Jul 2007 09:41:16 -0400 (EDT) Von: [EMAIL PROTECTED] An: [EMAIL PROTECTED] CC: synce-devel@lists.sourceforge.net Betreff: Re: [Synce-devel] Problems installing synce > When you do the 'sudo ./clean.sh', it will first try to unload those > modules if they are indeed loaded. If they were not loaded, you will see > the error messages you described - this is normal and expected behavior. > Running 'sudo make install' _after_ this should install the modules in the > proper location. Once they are installed in the proper location, you > should be able to do the following: > > # modprobe usbnet cdc_ether rndis_host > # lsmod > > Then, you should see that these modules are properly loaded into the > kernel. Does this work? If not, at which point does the behavior on your > system differ from what I described? > > -- > Richard Alimi > Department of Computer Science > Yale University > > On Mon, 9 Jul 2007, [EMAIL PROTECTED] wrote: > > > Hello, > > > > surely, I followed the instructions step for step, that means, I used > "sudo make install" (or, on my system: "su", root-password (I disabled sudo > in combination with user password, so I have a "real" root user on my > system), "make install", "exit"). > > > > Though this may be important: If you mean the "sudo make install" as > described on > http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2005_device_via_USB_%28usb-rndis-lite%29, > > then I did it although the command "sudo ./clean.sh" which should be > used before that leads to the described output. > > > > I guess it may have to do with some kernel components, but as I am not > that deep into kernel technology, I can´t really tell. > > > > Regards, > > Dennis Neumeier > > > > -------- Original-Nachricht -------- > > Datum: Mon, 9 Jul 2007 08:07:20 -0400 (EDT) > > Von: [EMAIL PROTECTED] > > An: synce-devel@lists.sourceforge.net > > Betreff: Re: [Synce-devel] Problems installing synce > > > > > This is perhaps a stupid question: did you do the 'sudo make install' > that > > > is part of the installation instructions as well? > > > > > > -- > > > Richard Alimi > > > Department of Computer Science > > > Yale University > > > > > > On Mon, 9 Jul 2007, [EMAIL PROTECTED] wrote: > > > > > > > Hello developers, > > > > > > > > Please be so kind ond read through this, as I didn´t get any reply > on > > > the users list and I guess this may lead to a correction to the wiki > (and I > > > am willing to do this as soon as I know where´s the mistake). > > > > > > > > As I received a new mobile phone (o2 Xda Orbit, can be found as a > HTC > > > Artemis and with usb-rndis-lite driver on the synce site), I would > like to > > > synchronize the contacts with my KDE 3.5.6 adressbook from my former > mobile > > > phone. > > > > > > > > Now, I deleted all synce applications from my Kubuntu Feisty and > started > > > to install als described on the site. But I fail on > > > > > > > > > > > > http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2005_device_via_USB_%28usb-rndis-lite%29 > > > > > > > > because I get the following error when executing "./clean.sh": > > > > > > > > ERROR: Module rndis_host does not exist in /proc/modules > > > > ERROR: Module cdc_ether does not exist in /proc/modules > > > > ERROR: Module usbnet does not exist in /proc/modules > > > > > > > > I read that I need the CONFIG_USB_NET_CDCETHER driver in my > 2.6.20-15 > > > kernel, so I started make menuconfig in /usr/src/linux and checked the > driver > > > as described on the site above. It´s modularized, so this should be > > > okay. > > > > > > > > But it still doesn´t work: I can´t load the usb-rndis-lite > driver, > > > because it´s not found. > > > > > > > > Please: Can anybody tell me what to do? > > > > > > > > Regards, > > > > Dennis Neumeier > > > > -- > > > > Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! > > > > Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > This SF.net email is sponsored by DB2 Express > > > > Download DB2 Express C - the FREE version of DB2 express and take > > > > control of your XML. No limits. Just data. Click to get it now. > > > > http://sourceforge.net/powerbar/db2/ > > > > _______________________________________________ > > > > SynCE-Devel mailing list > > > > SynCE-Devel@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/synce-devel > > > > > > > > -- > > Psssst! Schon vom neuen GMX MultiMessenger gehört? > > Der kanns mit allen: http://www.gmx.net/de/go/multimessenger > > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by DB2 Express > > Download DB2 Express C - the FREE version of DB2 express and take > > control of your XML. No limits. Just data. Click to get it now. > > http://sourceforge.net/powerbar/db2/ > > _______________________________________________ > > SynCE-Devel mailing list > > SynCE-Devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/synce-devel > > -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kanns mit allen: http://www.gmx.net/de/go/multimessenger -- Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten Browser-Versionen downloaden: http://www.gmx.net/de/go/browser ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
