Hi there
Your setup sounds quite old.. I'm almost certain dccm doesn't support
Windows Mobile 5... I'm certain that was introduced in later versions of
vdccm.. I strongly suggest libsynce 0.10 and odccm, which can be setup as
per the wiki... It's a little crusty but i am on #synce IRC if you get
stuck:
http://www.synce.org/index.php/Windows_Mobile_2005_Support
If all goes as Microsoft intended then PPP shouldn't be involved for WM5 and
later devices.
John
On 11/18/07, Steve DeLaney <[EMAIL PROTECTED]> wrote:
>
>
> I'm using synce with an IPAQ 2795 running windows mobile 5.
> host system is fedora core 6.
> connection is USB
> running a build-from-source synce-libsynce-0.6
>
> everything works great up until the point where PPP is established. Buy
> then ppp session collapses exactly as described
> in the synce QA "PPP error: "LCP terminated by peer"
>
> Of course after that pstatus fails with a RAPI error since ppp connection
> is down.
>
> the synce Q&A attributes this to an incorrect dccm -p password. However,
> In my case I've tried dccm both with and without an IPAQ password with the
> same LCP failure.
>
> Any ideas on what to try next?
>
> Thanks,
>
> /steverino2
> ** <[EMAIL PROTECTED]>
> **
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> SynCE-Devel mailing list
> SynCE-Devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/synce-devel
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
SynCE-Devel mailing list
SynCE-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/synce-devel
