On Wed, 2008-04-09 at 21:51 +0400, Ilya Bakulin wrote: > After some delay caused my by laptop's death I've installed all synce stuff > on my work PC. > So, here's output of lshal for 2 nodes created by plugging WM device in: >
<snip> > As you all see, there is no HAL_PROP_SERIAL_DEVICE. It's expected behavior, > because ucom-based devices unfortunately don't show themselves as serial > ports... I'll investigate this problem later, perhaps hack hal-freebsd > backend a little. > I've attached patch for hal-synce-legacy to make it work both on Linux and > FreeBSD. Please test it on Linux system. > > BTW, all applications where installed in non-standard prefix and are proven > to work without any problems. However, I didn't install sync stuff > (sync-engine, etc) on work machine yet. > Fixes look fine, and have been committed, thanks ! Mark ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
