On Sun, Aug 16, 2009 at 11:21 AM, Guido Diepen <gu...@jcwodan.nl> wrote:
> Hi Max,
>
> it sure is NOT a problem of devices not being supported. The important
> thing
> is that it is a windows mobile device.
>
OK, I understand.
I said that because i read this in the file "synce-hal-0.14/README":
"(...) For usb connections, most devices should be autodetected, if
yours is not please inform the synce project and we'll fix it ! (...)"
>
> However, certain vendors have set certain defaults different. An example of
> this being the IP addresses used by the device/computer when using
> ActiveSync.
Probably it's one of my problems. One of things that I read in my searches
is that to connect to a "Moto Q" with odccm is need to specify the ip, and
how my device is a "Moto Q11" ...
> >From your earlier messages it is not clear to me whether you are still
> using
> odccm or already are using the newer synce-hal.
Well, I hope I'm using the synce-hal, 'cause the ifconfig show me a new
interface (rndis0) when I plug the device. When I was using the odccm the
interface only were showed when I ran the program (odccm).
----------
# ifconfig
rndis0 Link encap:Ethernet Endereço de HW 80:f4:00:00:9e:b4
UP BROADCASTRUNNING MULTICAST MTU:3954 Métrica:1
RX packets:7 errors:6 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
colisões:0 txqueuelen:1000
RX bytes:396 (396.0 B) TX bytes:134 (134.0 B)
---------
But how you can see, the interface have errors.
>
>
> The main advantage with using synce-hal is that it deals with both legacy
> connections (PPP over serial over usb, via ipaq driver) and new style
> connections ( ethernet over usb, via rndis_host driver). Another advantage
> is
> that synce-hal uses DHCP to acquire an IP address from the device when it
> is
> connected, while in odccm you had to manually provide an IP address
> yourself.
>
> Therefore, if you are still using odccm, please install synce-hal. I don't
> know about lenny, but I think that synce-hal is in debian unstable.
I compiled the version: synce-hal-0.14.
Before this I had compiled these : librapi2, libsynce, odccm,
usb-rndis-lite, and nothing was uninstalled.
>
>
> >From your log messages I saw that you are using network manager, could you
> please disable that while testing? It has been known to interfere with
> setting up the device and causing the conneciton to not work.
I can not understand what you are calling by "network manager", but if it is
the firewall (iptables), I already cleared all rules.
--------
# iptables -nL
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
-----------------
>
>
> Another thing you can is the following. If you have synce-hal (will not
> work
> this way directly if you are using odccm), you could set your device to NOT
> use rndis, by removing the checkbox in the screen
> Start -> Settings -> Connections -> USB to PC
> that states something like: Use enhanced network connection, or use fast
> transfer connection.
>
> After that, connect the device again and see if the connection does work
> now.
>
I Tried (disabled the "Use enhanced network connection"), but I think that
is still not working. How can I know if is it working?
To know if it is working I trying this:
--------------
[device is unplugged]
# pls
** Message: Hal reports no devices connected
** Message: Odccm is not running, ignoring
pls: Could not find configuration at path '(Default)'
[device is plugged]
# pls
** Message: Device
/org/freedesktop/Hal/devices/usb_device_45e_ce_ffffffff_ff0b_ffff_9f06_3fea07009ffe_if0_serial_usb_0
not fully set in Hal, skipping
** Message: Odccm is not running, ignoring
pls: Could not find configuration at path '(Default)'
------------------------
maybe it is useful
# lsmod | grep usb
usbserial 26472 1 ipaq
usb_storage 77024 0
scsi_mod 129324 4 sd_mod,usb_storage,sbp2,libata
usbcore 118224 7
ipaq,usbserial,usb_storage,cdc_acm,ehci_hcd,uhci_hcd
>
> Kind regards,
>
> Guido Diepen
>
> On Sunday 16 August 2009 16:11:02 _mx_ wrote:
> > Hello there,
> >
> > I could not connect with a Moto Q11 (windows mobile 6.1) in my debian
> > lenny, so I want to know if someone could? At first, I tried get help on
> > since-users but know I think that it is a -devel problem...
> >
> > After some tests I think that the device is not supported.
> >
> > If it is really not supported, is there any work in that?
> >
> > If someone want to see, my tests and log messages are detailed in this
> > history (It's not cleared but there is a
> > lsusb.out<
> http://sourceforge.net/mailarchive/attachment.php?list_name=synce
>
> >-users&message_id=3cd298d70908081602x753c5708x59806a3ebcfc2b3f%40mail.gmail.
> >com&counter=2>attached there too) :
> >
> >
> http://sourceforge.net/mailarchive/forum.php?thread_name=3cd298d70908130508
> >s2928e02xacc9535bd6c67412%40mail.gmail.com&forum_name=synce-users
> >
> >
> > Thanks for any help,
> > Max
>
>
>
> --
> Guido Diepen <gu...@jcwodan.nl>
> Aviation is proof that given the will, we have the capacity to achieve the
> impossible.
> --Eddie Rickenbacker
>
>
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
> trial. Simplify your report design, integration and deployment - and focus
> on
> what you do best, core application coding. Discover what's new with
> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> _______________________________________________
> SynCE-Devel mailing list
> SynCE-Devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/synce-devel
>
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
SynCE-Devel mailing list
SynCE-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/synce-devel
