About 1.4.99.4 ============== This is the first release candidate for 1.5. No further changes are planned except for fixing yet-to-be-discovered bugs - so find them now! :-)
One focus in this release was on minimizing CPU consumption and disk writes. The most common case, a two-way sync with no changes on either side, no longer rewrites any meta data files. CPU consumption during local sync was reduced to one third by exchanging messages via shared memory instead of internal D-Bus. Redundant vCard decode/encode on the sending side of PBAP and too agressive flushing of meta data during a normal sync were removed. Altogether, sending 1000 contacts with photo data in a refresh-from-server local sync takes only one sixth of the CPU cycles compared to 1.3.99.3 (measured with valgrind's callgrind on x86_64). Based on community feedback and discussions, the terminology used in SyncEvolution for configuration, local sync and database access was revised. Some usability issues with setting up access to databases were addressed. For Google, the obsolete SyncML config template was removed and CalDAV/CardDAV were merged into a single "Google" template. Using Google Calendar/Contacts with OAuth2 authentication on a headless server becomes a bit easier: it is possible to set up access on one system with a GUI using either gSSO or GNOME Online Accounts, then take the OAuth2 refresh token and use it in SyncEvolution on a different system. See http://cgit.freedesktop.org/SyncEvolution/syncevolution/tree/src/backends/oauth2/README Some issues accessing Apple iCloud were fixed such that CardDAV works by just giving SyncEvolution [email protected] and password. No throrough testing was done, so iCloud support is still experimental. The PIM Manager API also supports Google Contact syncing. Some problems with suspending a PBAP sync were fixed. Suspend/abort can be tested with the sync.py example. The EDS memo backend is able to switch between syncing in plain text and iCalendar 2.0 VJOURNAL automatically. Details: * oauth2: new backend using libsoup/libcurl New backend implements identity provider for obtaining OAuth2 access token for systems without HMI support. Access token is obtained by making direct HTTP request to OAuth2 server and using refresh token obtained by user in some other way. New provider automatically updates stored refresh token when OAuth2 server is issuing new one. * PBAP: use raw text items This avoids the redundant parse/generate step on the sending side of the PBAP sync. * datatypes: raw text items with minimal conversion (FDO #52791) When using "raw/text/calendar" or "raw/text/vcard" as SyncEvolution "databaseFormat", all parsing and conversion is skipped. The backend's data is identical to the item data in the engine. Finding duplicates in a slow sync is very limited when using these types because the entire item data must match exactly. This is useful for the file backend when the goal is to store an exact copy of what a peer has or for limited, read-only backends (PBAP). The downside of using the raw types is that the peer is not given accurate information about which vCard or iCalendar properties are supported, which may cause some peers to not send all data. * engine: flush map items less frequently The Synthesis API does not say explicitly, but in practice all map items get updated in a tight loop. Rewriting the m_mappingNode (case insensitive string comparisons) and serialization to disk (std::ostrstream) consume a significant amount of CPU cycles and cause extra disk writes that can be avoided by making some assumptions about the sequence of API calls and flushing only once. * SoupTransport: drop CA file check It used to be necessary to specify a CA file for libsoup to enable SSL certificate checking. Nowadays libsoup uses the default CA store unless told otherwise, so the check in SyncEvolution became obsolete. However, now there is a certain risk that no SSL checking is done although the user asked for it (when libsoup is not recent enough or compiled correctly). * local sync: exchange SyncML messages via shared memory Encoding/decoding of the uint8_t array in D-Bus took a surprisingly large amount of CPU cycles relative to the rest of the SyncML message processing. Now the actual data resides in memory-mapped temporary files and the D-Bus messages only contain offset and size inside these files. Both sides use memory mapping to read and write directly. For caching 1000 contacts with photos on a fast laptop, total sync time roughly drops from 6s to 3s. To eliminate memory copies, memory handling in libsynthesis or rather, libsmltk is tweaked such that it allocates the buffer used for SyncML message data in the shared memory buffer directly. This relies on knowledge of libsmltk internals, but those shouldn't change and if they do, SyncEvolution will notice ("unexpected send buffer"). * local sync: avoid updating meta data when nothing changed The sync meta data (sync anchors, client change log) get updated after a sync even if nothing changed and the existing meta data could be used again. This can be skipped for local sync, because then SyncEvolution can ensure that both sides skip updating the meta data. With a remote SyncML server that is not possible and thus SyncEvolution has to update its data. This optimization is only used for local syncs with one source. It is based on the observation that when the server side calls SaveAdminData, the client has sent its last message and the sync is complete. At that point, SyncEvolution can check whether anything has changed and if not, skip saving the server's admin data and stop the sync without sending the real reply to the client. Instead the client gets an empty message with "quitsync" as content type. Then it takes shortcuts to close down without finalizing the sync engine, because that would trigger writing of meta data changes. The server continues its shutdown normally. This optimization is limited to syncs with a single source, because the assumption about when aborting is possible is harder to verify when multiple sources are involved. * PIM: include CardDAV in CreatePeer() This adds "protocol: CardDAV" as a valid value, with corresponding changes to the interpretation of some existing properties and some new ones. The API itself is not changed. Suspending a CardDAV sync is possible. This freezes the internal SyncML message exchange, so data exchange with the CardDAV server may continue for a while after SuspendPeer(). Photo data is always downloaded immediately. The "pbap-sync" flag in SyncPeerWithFlags() has no effect. Syncing can be configured to be one-way (local side is read-only cache) or two-way (local side is read/write). Meta data must be written either way, to speed up caching or allow two-way syncing. The most common case (no changes on either side) will have to be optimized such that existing meta data is not touched and thus no disk writes occur. * PIM: handle SuspendPeer() before and after transfer (FDO #82863) A SuspendPeer() only succeeded while the underlying Bluetooth transfer was active. Outside of that, Bluez errors caused SyncEvolution to attempt a cancelation of the transfer and stopped the sync. When the transfer was still queueing, obexd returns org.bluez.obex.Error.NotInProgress. This is difficult to handle for SyncEvolution: it cannot prevent the transfer from starting and has to let it become active before it can suspend the transfer. Canceling would lead to difficult to handle error cases (like partially parsed data) and therefore is not done. The Bluez team was asked to implement suspending of queued transfers (see "org.bluez.obex.Transfer1 Suspend/Resume in queued state" on [email protected]), so this case might not happen anymore with future Bluez. When the transfer completes before obexd processes the Suspend(), org.freedesktop.DBus.Error.UnknownObject gets returned by obexd. SyncEvolution can ignore errors which occur after the active transfer completed. In addition, it should prevent starting the next one. This may be relevant for transfer in chunks, although the sync engine will also stop asking for data and thus typically no new transfer gets triggered anyway. * PIM: add suspend/resume/abort to sync.py CTRL-C while waiting for the end of a sync causes an interactive prompt to appear where one can choose been suspend/resume/abort and continuing to wait. CTRL-C again in the prompt aborts the script. * PIM: fix sync.py --sync-flags The help text used single quotes for the JSON example instead of the required double quotes. Running without --sync-flags was broken because of trying to parse the empty string as JSON. * command line: revise usability checking of datastores When configuring a new sync config, the command line checks whether a datastore is usable before enabling it. If no datastores were listed explicitly, only the usable ones get enabled. If unusable datastores were explicitly listed, the entire configure operation fails. This check was based on listing databases, which turned out to be too unspecific for the WebDAV backend: when "database" was set to some URL which is good enough to list databases, but not a database URL itself, the sources where configured with that bad URL. Now a new SyncSource::isUsable() operation is used, which by default just falls back to calling the existing Operations::m_isEmpty. In practice, all sources either check their config in open() or the m_isEmpty operation, so the source is usable if no error is enountered. For WebDAV, the usability check is skipped because it would require contacting a remote server, which is both confusing (why does a local configure operation need the server?) and could fail even for valid configs (server temporarily down). The check was incomplete anyway because listing databases gave a fixed help text response when no credentials were given. For usability checking that should have resulted in "not usable" and didn't. The output during the check was confusing: it always said "listing databases" without giving a reason why that was done. The intention was to give some feedback while a potentially expensive operation ran. Now the isUsable() method itself prints "checking usability" if (and only if!) such a check is really done. Sometimes datastores were checked even when they were about to be configure as "disabled" already. Now checking such datastores is skipped. * EDS: memo syncing as iCalendar 2.0 (FDO #52714) When syncing memos with a peer which also supports iCalendar 2.0 as data format, the engine will now pick iCalendar 2.0 instead of converting to/from plain text. The advantage is that some additional properties like start date and categories can also be synchronized. The code is a lot simpler, too, because the EDS specific iCalendar 2.0 <-> text conversion code can be removed. * datatypes: text/calendar+plain revised heuristic When sending a VEVENT, DESCRIPTION was set to the SUMMARY if empty. This may have been necessary for some peers, but for notes (= VJOURNAL) we don't know that (hasn't been used in the past) and don't want to alter the item unnecessarily, so skip that part and allow empty DESCRIPTION. When receiving a plain text note, the "text/calendar+plain" type used to store the first line as summary and the rest as description. This may be correct in some cases and wrong in others. The EDS backend implemented a different heuristic: there the first line is copied into the summary and stays in the description. This makes a bit more sense (the description alone is always enough to understand the note). Therefore and to avoid behavioral changes for EDS users when switching the EDS backend to use text/calendar+plain, the engine now uses the same approach. * source -> datastore rename, improved terminology The word "source" implies reading, while in fact access is read/write. "datastore" avoids that misconception. Writing it in one word emphasizes that it is single entity. While renaming, also remove references to explicit --*-property parameters. The only necessary use today is "--sync-property ?" and "--datastore-property ?". --datastore-property was used instead of the short --store-property because "store" might be mistaken for the verb. It doesn't matter that it is longer because it doesn't get typed often. --source-property must remain valid for backward compatility. As many user-visible instances of "source" as possible got replaced in text strings by the newer term "datastore". Debug messages were left unchanged unless some regex happened to match it. The source code will continue to use the old variable and class names based on "source". Various documentation enhancements: Better explain what local sync is and how it involves two sync configs. "originating config" gets introduces instead of just "sync config". Better explain the relationship between contexts, sync configs, and source configs ("a sync config can use the datastore configs in the same context"). An entire section on config properties in the terminology section. "item" added (Todd Wilson correctly pointed out that it was missing). Less focus on conflict resolution, as suggested by Graham Cobb. Fix examples that became invalid when fixing the password storage/lookup mechanism for GNOME keyring in 1.4. The "command line conventions", "Synchronization beyond SyncML" and "CalDAV and CardDAV" sections were updated. It's possible that the other sections also contain slightly incorrect usage of the terminology or are simply out-dated. * local sync: allow config name in syncURL=local:// Previously, only syncURL=local://@<context name> was allowed and used the "target-config@context name" config as target side in the local sync. Now "local://config-name@context-name" or simply "local://config-name" are also allowed. "target-config" is still the fallback if only a context is give. It also has one more special meaning: "--configure target-config@google" will pick the "Google" template automatically because it knows that the intention is to configure the target side of a local sync. It does not know that when using some other name for the config, in which case the template (if needed) must be specified explicitly. The process name in output from the target side now also includes the configuration name if it is not the default "target-config". * Google: remove SyncML template, combine CalDAV/CardDAV Google has turned off their SyncML server, so the corresponding "Google Contacts" template became useless and needs to be removed. It gets replaced by a "Google" template which combines the three different URLs currently used by Google for CalDAV/CardDAV. This new template can be used to configure a "target-config@google" with default calendar and address book database already enabled. The actual URL of these databases will be determined during the first sync using them. The template relies on the WebDAV backend's new capability to search multiple different entries in the syncURL property for databases. To avoid listing each calendar twice (once for the legacy URL, once with the new one) when using basic username/password authentication, the backend needs a special case for Google and detect that the legacy URL does not need to be checked. * config: allow storing credentials for email address When configuring a WebDAV server with username = email address and no URL (which is possible if the server supports service discovery via the domain in the email address), then storing the credentials in the GNOME keyring used to fail with "cannot store password in GNOME keyring, not enough attributes". That is because GNOME keyring seemed to get confused when a network login has no server name and some extra safeguards were added to SyncEvolution to avoid this. To store the credentials in the case above, the email address now gets split into user and domain part and together get used to look up the password. Upgrading from releases <= 1.3.99.4: ------------------------------------ If the value of "username/databaseUser/proxyUser" contains a colon, the "user:" prefix must be added to the value, to continue treating it like a plain user name and not some reference to an unknown identity provider (like "id:", "goa:", "signon:", etc.). The lookup of passwords in GNOME Keyring was updated slightly in 1.3.99.5. It may be necessary to set passwords anew if the old one is no longer found. Upgrading from release 1.2.x: ----------------------------- The sync format of existing configurations for Mobical (aka Everdroid) must be updated manually, because the server has encoding problems when using vCard 3.0 (now the default for Evolution contacts): syncevolution --configure \ syncFormat=text/x-vcard \ mobical addressbook The Funambol template explicitly enables usage of the "refresh-from-server" sync mode to avoid getting throttled with 417 'retry later' errors. The same must be added to existing configs manually: syncevolution --configure \ enableRefreshSync=TRUE \ funambol Upgrading from releases before 1.2: ----------------------------------- Old configurations can still be read. But writing, as it happens during a sync, must migrate the configuration first. Releases >= 1.2 automatically migrates configurations. The old configurations will still be available (see "syncevolution --print-configs") but must be renamed manually to use them again under their original names with older SyncEvolution releases. Source, Installation, Further information ========================================= http://syncevolution.org/blogs/pohly/2014/syncevolution-14994-released Source code bundles for users are available in http://downloads.syncevolution.org/syncevolution/sources and the original source is in the git repositories http://cgit.freedesktop.org/SyncEvolution/ i386, lpia and amd64 binaries for Debian-based distributions are available via the "unstable" syncevolution.org repository. Add the following entry to your /apt/source.list: deb http://downloads.syncevolution.org/apt unstable main Then install "syncevolution-evolution", "syncevolution-kde" and/or "syncevolution-activesync". These binaries include the "sync-ui" GTK GUI and were compiled for Ubuntu 10.04 LTS (Lucid), except for ActiveSync binaries which were compiled for Debian Wheezy, Ubuntu Saucy and Ubuntu Trusty. A backend for Ubuntu Online Accounts was compiled on Ubuntu Saucy. The packages mentioned above are meta-packages which pull in suitable packages matching the distro during installation. Older distributions like Debian 4.0 (Etch) can no longer be supported with precompiled binaries because of missing libraries, but the source still compiles when not enabling the GUI (the default). The same binaries are also available as .tar.gz and .rpm archives in http://downloads.syncevolution.org/syncevolution/. In contrast to 0.8.x archives, the 1.x .tar.gz archives have to be unpacked and the content must be moved to /usr, because several files would not be found otherwise. After installation, follow the http://syncevolution.org/documentation/getting-started steps. -- Patrick Ohly, on behalf of everyone who has helped to make SyncEvolution possible: http://syncevolution.org/about/contributors _______________________________________________ SyncEvolution mailing list [email protected] https://lists.syncevolution.org/mailman/listinfo/syncevolution
