Hi, maybe this has already been discussed but couldn't figure out how to search for it. We have a backup server with 24 SATA disks where we upgraded all disks from 1 TB to 2 TB. We forgot to do all the cfgadm -c replace e for all the receptacles and the AP_ID just increased the "y" value for cxtydz . For instance for controller c5 we got:
c5::dsk/c5t8d0 disk connected configured unknown c5::dsk/c5t9d0 disk connected configured unknown c5::dsk/c5t10d0 disk connected configured unknown c5::dsk/c5t11d0 disk connected configured unknown c5::dsk/c5t12d0 disk connected configured unknown c5::dsk/c5t13d0 disk connected configured unknown c5::dsk/c5t14d0 disk connected configured unknown c5::dsk/c5t15d0 disk connected configured unknown We want to have them back at: c5::dsk/c5t0d0 disk connected configured unknown c5::dsk/c5t1d0 disk connected configured unknown c5::dsk/c5t2d0 disk connected configured unknown c5::dsk/c5t3d0 disk connected configured unknown c5::dsk/c5t4d0 disk connected configured unknown c5::dsk/c5t5d0 disk connected configured unknown c5::dsk/c5t6d0 disk connected configured unknown c5::dsk/c5t7d0 disk connected configured unknown Is there a way to do this without replugging the old drives, doing a cfgadm replace for all of them ? We tried reboot with --r and that didn't work. Thanks in advance for any answers, Luigi-- -- This message posted from opensolaris.org _______________________________________________ sysadmin-discuss mailing list sysadmin-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/sysadmin-discuss
