Всем привет!
В общем модель UPS SUA3000I.
Имеем:
[EMAIL PROTECTED] /]# cat /etc/nut/driver.list | grep APC && lspci | grep USB
&& lsusb
&& usbtree && ls /dev/usb*
"APC" "Back-UPS Pro" "" "apcsmart"
"APC" "Matrix-UPS" "" "apcsmart"
"APC" "Smart-UPS" "" "apcsmart"
"APC" "Back-UPS Pro USB" "" "newhidups or hidups"
"APC" "Back-UPS USB" "" "newhidups or hidups"
"APC" "Back-UPS RS USB" "" "newhidups or hidups"
"APC" "Back-UPS LS USB" "" "newhidups or hidups"
"APC" "Back-UPS ES/CyberFort 350" "" "newhidups or hidups"
"APC" "Back-UPS BF500" "" "newhidups"
"APC" "Smart-UPS USB" "" "newhidups or hidups"
"APC" "Back-UPS" "940-0095A/C cables" "genericups upstype=1"
"APC" "Back-UPS" "940-0020B/C cables" "genericups upstype=2"
"APC" "Back-UPS" "940-0023A cable" "genericups upstype=9"
"APC" "Back-UPS Office" "940-0119A cable" "genericups
upstype=12"
"APC" "Masterswitch" "Not a UPS - 940-0020 cable" "genericups
upstype=12"
"APC" "Back-UPS RS 500" "custom non-USB cable" "genericups
upstype=20"
"APC" "(various)" "SNMP monitoring card" "snmp-ups (experimental
driver)"
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 004: ID 051d:0002 American Power Conversion Back-UPS Pro
500/1000/1500
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 4, If 0, Class=HID, Driver=usbhid, 1.5M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/dev/usbdev1.1_ep00 /dev/usbdev2.1_ep81 /dev/usbdev3.1_ep00
/dev/usbdev4.1_ep81
/dev/usbdev1.1_ep81 /dev/usbdev2.4_ep00 /dev/usbdev3.1_ep81
/dev/usbdev5.1_ep00
/dev/usbdev2.1_ep00 /dev/usbdev2.4_ep81 /dev/usbdev4.1_ep00
/dev/usbdev5.1_ep81
[EMAIL PROTECTED] /]#
Ни как не могу сообразить:
1) по чему smart-ups определяется как Back-UPS Pro 500/1000/1500
2) какой мне драйвер порт указывать в /etc/nut/ups.conf исходя из
вышеизложенного?
--
С уважением Шенцев Алексей Владимирович.
E-mail: [EMAIL PROTECTED]
XMPP: [EMAIL PROTECTED], [EMAIL PROTECTED]
ICQ: 271053845
_______________________________________________
Sysadmins mailing list
[email protected]
https://lists.altlinux.org/mailman/listinfo/sysadmins
