Hi Pasi, On Tue, 9 Sep 2008, [EMAIL PROTECTED] wrote:
> Switching the order of the 1st (wildcards) and 2nd (subjectaltname) > bullets would IMHO make the flow more logical. Otherwise, looks good. > I see your point but that would create a forward reference. The second bullet (subjectAltName) contains the line, "Locally configured names MAY contain the wildcard character to...". I'm thinking that the wildcard character should be defined before that. It could be swapped with a reference such as the following placed into the subjectAltName bullet, "Locally configured names MAY contain the wildcard character (see next bullet) to...". What does everyone think about this? Thanks, Chris > Best regards, > Pasi > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of ext Joseph >> Salowey (jsalowey) >> Sent: 06 September, 2008 01:11 >> To: Chris Lonvick (clonvick) >> Cc: syslog >> Subject: Re: [Syslog] revised 5.2 text : please comment was: >> RE: Need yourinput on finalissuesondraft-ietf-syslog-transport-tls >> >> I added information on locally configured names with wildcards, >> clarified the ACE conversion is for comparison, and change >> the ordering >> of the bullets. I think this text should be pretty close now. >> >> Implementations MUST support certification path validation >> [RFC5280]. >> In addition they MUST support specifying the authorized >> peers using >> locally configured host names and matching the name against the >> certificate as follows. >> >> o The '*' (ASCII 42) wildcard character is allowed in >> the dNSName >> of >> the subjectAltName extension (and in common name, if used to >> store >> the host name), and then only as the left-most (least >> significant) >> DNS label in that value. This wildcard matches any left-most >> DNS >> label in the server name. That is, the subject *.example.com >> matches the server names a.example.com and b.example.com, but >> does >> not match example.com or a.b.example.com. Implementations MUST >> support wildcards in certificates as specified above, but MAY >> provide a configuration option to disable them. >> >> o Implementations MUST support matching the locally configured >> host >> name against a dNSName in the subjectAltName >> extension field and >> SHOULD support checking the name against the common >> name portion >> of >> the subject distinguished name. Locally configured names MAY >> contain >> the wildcard character to match a range of values. >> The types of >> >> wildcards supported MAY be more flexible than what is >> allowed in >> >> certificate subjects to make it possible to support various >> policies >> for different environments. For example, a policy could allow >> for a >> trust-root-based authorization where all credentials >> issued by a >> >> particular CA trust root are authorized. >> >> o If the locally configured name is an internationalized domain >> name, conforming implementations MUST convert it to the ASCII >> Compatible Encoding (ACE) format for performing >> comparisons as >> specified in Section 7 of RFC 5280. >> >> o Implementations MAY support matching a locally configured IP >> address against an iPAddress stored in the subjectAltName >> extension. In this case, the locally configured IP address is >> converted to an octet string as specified in RFC 5280, Section >> 4.2.1.6. A match occurs if this octet string is equal to the >> value >> of iPAddress in the subjectAltName extension. >> >> Cheers, >> >> Joe >> >>> -----Original Message----- >>> From: Chris Lonvick (clonvick) >>> Sent: Wednesday, September 03, 2008 1:44 PM >>> To: Joseph Salowey (jsalowey) >>> Cc: tom.petch; syslog >>> Subject: revised 5.2 text : please comment was: RE: [Syslog] >>> Need your input on finalissuesondraft-ietf-syslog-transport-tls >>> >>> Hi, >>> >>> I'm going to take a stab at word smithing. I think there's >>> still some ambiguity in the section that Joe just proposed >>> and we may be able to resolve by putting in bullets. Please >>> look at this and give feedback. >>> >>> === >>> Implementations MUST support certification path >>> validation [RFC5280]. >>> In addition they MUST support specifying the authorized >>> peers using >>> locally configured host names and matching the name against the >>> certificate as follows. >>> o Implementations MUST support matching the locally >>> configured host >>> name against a dNSName in the subjectAltName >>> extension field and >>> SHOULD support checking the name against the common >>> name portion of >>> the subject distinguished name. >>> o Implementations MAY support matching a locally configured IP >>> address against an iPAddress stored in the subjectAltName >>> extension. In this case, the locally configured IP >> address is >>> converted to an octet string as specified in RFC >> 5280, Section >>> 4.2.1.6. A match occurs if this octet string is >>> equal to the value >>> of iPAddress in the subjectAltName extension. >>> o The '*' (ASCII 42) wildcard character is allowed in >>> the dNSName of >>> the subjectAltName extension (and in common name, if >>> used to store >>> the host name), and then only as the left-most (least >>> significant) >>> DNS label in that value. This wildcard matches any >>> left-most DNS >>> label in the server name. That is, the subject >> *.example.com >>> matches the server names a.example.com and >>> b.example.com, but does >>> not match example.com or a.b.example.com. >> Implementations MUST >>> support wildcards in certificates as specified >> above, but MAY >>> provide a configuration option to disable them. >>> o If the locally configured name is an >> internationalized domain >>> name, conforming implementations MUST convert it to >> the ASCII >>> Compatible Encoding (ACE) format as specified in >>> Section 7 of RFC >>> 5280. >>> >>> === >>> >>> Does this work for anyone? :-) >>> >>> Thanks, >>> Chris >>> >> _______________________________________________ >> Syslog mailing list >> [email protected] >> https://www.ietf.org/mailman/listinfo/syslog >> > _______________________________________________ Syslog mailing list [email protected] https://www.ietf.org/mailman/listinfo/syslog
