Hi Folks,
Many thanks to the people who helped put this together and get it through
the process.
Regards,
Chris
---------- Forwarded message ----------
Date: Mon, 31 Aug 2009 10:24:31 -0700 (PDT)
From: The IESG <[email protected]>
To: IETF-Announce <[email protected]>
Cc: Internet Architecture Board <[email protected]>,
RFC Editor <[email protected]>
Subject: Protocol Action: 'Alarms in SYSLOG' to Proposed Standard
The IESG has approved the following document:
- 'Alarms in SYSLOG '
<draft-ietf-opsawg-syslog-alarm-02.txt> as a Proposed Standard
This document is the product of the Operations and Management Area Working
Group.
The IESG contact persons are Dan Romascanu and Ron Bonica.
A URL of this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-opsawg-syslog-alarm-02.txt
Technical Summary
This document describes how to send alarm information in syslog. It
includes the mapping of ITU perceived severities onto syslog message
fields and a number of alarm-specific SD-PARAM definitions from X.733
and the IETF Alarm MIB.
Working Group Summary
The document was revised based on WG feedback & the result meets
the issues that were raised.
Document Quality
SYSLOG is widely implemented and deployed, and the ITU severities are
used by a number of protocols and alarm models including the IETF
Alarm MIB.
Personnel
Scott Bradner is the Document Shepherd for this document. Dan
Romascanu is the Responsible Area Director.
RFC Editor Note
Please insert the following edits in the published version:
1. In section 1,
Old:Alarm related terminology is defined in [RFC3877].
New:Alarm related terminology is defined in [RFC3877].
SD-ID, SD-PARM and other syslog related terms are defined in [RFC5424]
2. In section 3
Old: the SD-PARARMS are mandatory.
New: the SD-PARAMS are mandatory.
3. In section 3.6
Old: [RFC1738] and its updates. In the case of an SNMP resource, the
New: [RFC3986] and its updates. In the case of an SNMP resource, the
4. In section 4
Old: In this example, extended from [Syslog], the VERSION is 1 and the
New: In this example, extended from [RFC5424], the VERSION is 1 and the
OLD: 'APP-NAME is "su"'
NEW: 'APP-NAME is "evntslog"'
OLD: 'examples...@0'
NEW: 'examples...@32473'
OLD: 'resourceURI ='
NEW: 'resourceURI='
5. In section 6
Old: IANA is requested to register the SD-IDs
New: IANA is requested to register the syslog Structured Data ID Values
6. In section 8.1
Old: [RFC1738] Berners-Lee, T., Masinter, L., and M. McCahill,
"Uniform
Resource Locators (URL)", RFC 1738, December 1994.
New: [RFC3986] Berners-Lee, T., Fielding, R., and Masinter, L.,
"Uniform Resource Identifier (URI): Generic Syntax", RFC RFC3986, January
2005.
7. In Section 3.1:
OLD: If the "alarm" SD-ID is supported, the "resource" SD-PARAM MUST be
supported.
NEW: If the "alarm" SD-ID is included, the "resource" SD-PARAM MUST be
included.
8. In Section 3.2:
OLD: If the "alarm" SD-ID is supported, the "probableCause" SD-PARAM MUST
be supported.
NEW: If the "alarm" SD-ID is included, the "probableCause" SD-PARAM MUST
be included.
9. In Section 3.3:
OLD: If the "alarm" SD-ID is supported, the "perceivedSeverity" SD-PARAM
MUST be supported.
NEW: If the "alarm" SD-ID is included, the "perceivedSeverity" SD-PARAM
MUST be included.
10. In Section 3.4:
OLD: If the "alarm" SD-ID is supported, the "eventType" SD-PARAM SHOULD
be supported.
NEW: If the "alarm" SD-ID is included, the "eventType" SD-PARAM SHOULD be
included.
11. In Section 3.5:
OLD: If the "alarm" SD-ID is supported, the "trendIndication" SD-PARAM
SHOULD be supported.
NEW: If the "alarm" SD-ID is included, the "trendIndication" SD-PARAM
SHOULD be included.
12. In Section 3.6:
OLD: If the "alarm" SD-ID is supported, the "resourceURI" SD-PARAM SHOULD
be supported.
NEW: If the "alarm" SD-ID is included, the "resourceURI" SD-PARAM SHOULD
be included.
_______________________________________________
IETF-Announce mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/ietf-announce
_______________________________________________
Syslog mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/syslog
