W dniu 29 marca 2011 21:07 użytkownik Lennart Poettering <lenn...@poettering.net> napisał: > On Tue, 29.03.11 21:06, Michał Piotrowski (mkkp...@gmail.com) wrote: > >> >> [Install] >> >> WantedBy=multi-user.target >> >> >> >> It works well until I add >> >> ExecStop=/bin/bash -c "for module in $HWMON_MODULES $BUS_MODULES; do >> >> /sbin/modprobe -r $module >/dev/null 2>&1; done" >> >> >> >> Is there some magical way in which I can make a simple loop in >> >> ExecStop? >> > >> > Hmm, are you suggesting that this works in ExecStart but not in >> > ExecStop? That would be a bug. >> >> I tried >> ExecStop=-/sbin/modprobe -qabr $BUS_MODULES $HWMON_MODULES >> too and also does not work. > > What precisely fails? Is the command line not properly constructed? Do > you have any further hints?
Hmm... strange loaded modules Module Size Used by ecryptfs 86341 1 i2c_i801 9213 0 serio_raw 4426 0 iTCO_wdt 11480 0 iTCO_vendor_support 2634 1 iTCO_wdt r8169 35525 0 mii 4318 1 r8169 ipv6 282007 77 sata_sil 8104 0 i915 346255 0 drm_kms_helper 27243 1 i915 drm 187712 2 i915,drm_kms_helper i2c_algo_bit 4950 1 i915 i2c_core 25468 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit video 12432 1 i915 I start this script [Unit] Description=lm_sensors for monitoring motherboard sensor values After=syslog.target [Service] EnvironmentFile=/etc/sysconfig/lm_sensors Type=oneshot ExecStart=-/sbin/modprobe -qab $BUS_MODULES $HWMON_MODULES ExecStart=/usr/bin/sensors -s #ExecStop=-/sbin/modprobe -qabr $BUS_MODULES $HWMON_MODULES [Install] WantedBy=multi-user.target Now I've got Module Size Used by smsc47m192 12267 0 hwmon_vid 2171 1 smsc47m192 coretemp 5771 0 ecryptfs 86341 1 i2c_i801 9213 0 serio_raw 4426 0 iTCO_wdt 11480 0 iTCO_vendor_support 2634 1 iTCO_wdt r8169 35525 0 mii 4318 1 r8169 ipv6 282007 77 sata_sil 8104 0 i915 346255 0 drm_kms_helper 27243 1 i915 drm 187712 2 i915,drm_kms_helper i2c_algo_bit 4950 1 i915 i2c_core 25468 6 smsc47m192,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit video 12432 1 i915 as you can see smsc47m192 is loaded I uncomment ExecStop=-/sbin/modprobe -qabr $BUS_MODULES $HWMON_MODULES and run systemctl daemon-reload and systemctl stop lm_sensors.service I still have smsc47m192 loaded but when I do systemctl start lm_sensors.service module is unloaded Module Size Used by ecryptfs 86341 1 i2c_i801 9213 0 serio_raw 4426 0 iTCO_wdt 11480 0 iTCO_vendor_support 2634 1 iTCO_wdt r8169 35525 0 mii 4318 1 r8169 ipv6 282007 77 sata_sil 8104 0 i915 346255 0 drm_kms_helper 27243 1 i915 drm 187712 2 i915,drm_kms_helper i2c_algo_bit 4950 1 i915 i2c_core 25468 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit video 12432 1 i915 > > Lennart > > -- > Lennart Poettering - Red Hat, Inc. > -- Best regards, Michal http://eventhorizon.pl/ _______________________________________________ systemd-devel mailing list systemd-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/systemd-devel
