Hello All! I see that promiscous mode was discussed a few times before but I'm not sure if I found something new or not.
I've got the following setup - a physical interface (enp1s0f0), which I wanted to add to the bridge (br0). My setup consists of the following files * br0.netdev: [NetDev] Name=br0 Kind=bridge * br0.network: [Match] Name=br0 [Network] Address=xx.yy.zz.27/27 Gateway=xx.yy.zz.17 * enp1s0f0.network: [Match] Name=enp1s0f0 [Network] Bridge=br0 So this looks pretty simple. Unfortunately it doesn't work. If I start pinging xx.yy.zz.17, then I see (using tcpdump) that the gateway even replies, and this reply was received at physical interface but br0 doesn't recognize it (and consequently ping didn't get a reply back). But if I change the br0 mode with "ifconfig br0 promisc" it starts receiving data. Is this a known issue? Or maybe I missed something in docs? -- With best regards, Peter Lemenkov. _______________________________________________ systemd-devel mailing list systemd-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/systemd-devel