Hi,

On 3/17/21 8:06 PM, Alan Stern wrote:
> Matthias reports that the Amazon Kindle automatically removes its
> emulated media if it doesn't receive another SCSI command within about
> one second after a SYNCHRONIZE CACHE.  It does so even when the host
> has sent a PREVENT MEDIUM REMOVAL command.  The reason for this
> behavior isn't clear, although it's not hard to make some guesses.
> 
> At any rate, the results can be unexpected for anyone who tries to
> access the Kindle in an unusual fashion, and in theory they can lead
> to data loss (for example, if one file is closed and synchronized
> while other files are still in the middle of being written).
> 
> To avoid such problems, this patch creates a new usb-storage quirks
> flag telling the driver always to issue a REQUEST SENSE following a
> SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
> Kindle with the flag set.  This is sufficient to prevent the Kindle
> from doing its automatic unload, without interfering with proper
> operation.
> 
> Another possible way to deal with this would be to increase the
> frequency of TEST UNIT READY polling that the kernel normally carries
> out for removable-media storage devices.  However that would increase
> the overall load on the system and it is not as reliable, because the
> user can override the polling interval.  Changing the driver's
> behavior is safer and has minimal overhead.
> 
> Reported-and-tested-by: Matthias Schwarzott <z...@gentoo.org>
> Signed-off-by: Alan Stern <st...@rowland.harvard.edu>
> CC: <sta...@vger.kernel.org>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdego...@redhat.com>

Regards,

Hans


> 
> ---
> 
> 
> [as1953]
> 
> 
>  drivers/usb/storage/transport.c    |    7 +++++++
>  drivers/usb/storage/unusual_devs.h |   12 ++++++++++++
>  include/linux/usb_usual.h          |    2 ++
>  3 files changed, 21 insertions(+)
> 
> Index: usb-devel/drivers/usb/storage/transport.c
> ===================================================================
> --- usb-devel.orig/drivers/usb/storage/transport.c
> +++ usb-devel/drivers/usb/storage/transport.c
> @@ -656,6 +656,13 @@ void usb_stor_invoke_transport(struct sc
>               need_auto_sense = 1;
>       }
>  
> +     /* Some devices (Kindle) require another command after SYNC CACHE */
> +     if ((us->fflags & US_FL_SENSE_AFTER_SYNC) &&
> +                     srb->cmnd[0] == SYNCHRONIZE_CACHE) {
> +             usb_stor_dbg(us, "-- sense after SYNC CACHE\n");
> +             need_auto_sense = 1;
> +     }
> +
>       /*
>        * If we have a failure, we're going to do a REQUEST_SENSE 
>        * automatically.  Note that we differentiate between a command
> Index: usb-devel/drivers/usb/storage/unusual_devs.h
> ===================================================================
> --- usb-devel.orig/drivers/usb/storage/unusual_devs.h
> +++ usb-devel/drivers/usb/storage/unusual_devs.h
> @@ -2212,6 +2212,18 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0
>               US_FL_NO_READ_DISC_INFO ),
>  
>  /*
> + * Reported by Matthias Schwarzott <z...@gentoo.org>
> + * The Amazon Kindle treats SYNCHRONIZE CACHE as an indication that
> + * the host may be finished with it, and automatically ejects its
> + * emulated media unless it receives another command within one second.
> + */
> +UNUSUAL_DEV( 0x1949, 0x0004, 0x0000, 0x9999,
> +             "Amazon",
> +             "Kindle",
> +             USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> +             US_FL_SENSE_AFTER_SYNC ),
> +
> +/*
>   * Reported by Oliver Neukum <oneu...@suse.com>
>   * This device morphes spontaneously into another device if the access
>   * pattern of Windows isn't followed. Thus writable media would be dirty
> Index: usb-devel/include/linux/usb_usual.h
> ===================================================================
> --- usb-devel.orig/include/linux/usb_usual.h
> +++ usb-devel/include/linux/usb_usual.h
> @@ -86,6 +86,8 @@
>               /* lies about caching, so always sync */        \
>       US_FLAG(NO_SAME, 0x40000000)                            \
>               /* Cannot handle WRITE_SAME */                  \
> +     US_FLAG(SENSE_AFTER_SYNC, 0x80000000)                   \
> +             /* Do REQUEST_SENSE after SYNCHRONIZE_CACHE */  \
>  
>  #define US_FLAG(name, value) US_FL_##name = value ,
>  enum { US_DO_ALL_FLAGS };
> 

_______________________________________________
systemd-devel mailing list
systemd-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/systemd-devel

Reply via email to