Hello-
I have an Ubuntu Server 20.04 (systemd 245 (245.4-4ubuntu3.13)) box that I
recently installed a Intel quad-port Gigabit ethernet adapter (E1G44ETBLK).
It appears that the predictable interface naming is only renaming the first
two interfaces (ens8f0, ens8f1) and the second two fail to be renamed
(eth2, eth3).
>From the logs, I see the following messages:
systemd-udevd[456]: eth2: Failed to rename network interface 5 from 'eth2'
to 'ens8f0': File exists
systemd-udevd[456]: eth2: Failed to process device, ignoring: File exists
systemd-udevd[459]: ethtool: autonegotiation is unset or enabled, the speed
and duplex are not writable.
systemd-udevd[459]: eth3: Failed to rename network interface 6 from 'eth3'
to 'ens8f1': File exists
systemd-udevd[459]: eth3: Failed to process device, ignoring: File exists
Taking a closer look at the PCI bus, I see:
05:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network
Connection (rev 01)
05:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network
Connection (rev 01)
06:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network
Connection (rev 01)
06:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network
Connection (rev 01)
It looks like the adapter has two instances ending in '0' and two instances
ending in '1'; they differ by the higher number ('05' vs '06') in the lspci
output.
Is this a bug? I'd expect to see the 3rd and 4th interfaces to be named
ens8f2, ens8f3.
Any help would be greatly appreciated - thanks!
Tim L
